The way to put the line on the line is to open the teardrop wheel, put the fishing line through the loop and wind it up.

1.Open the teardrop wheel

First, prepare the teardrop wheel + PE line + pliers, open the teardrop wheel.

2. Pass the fishing line through the ring and wind it

Pass one end of the PE line through the hole of the teardrop reel, tie a dead knot at the end of the line, and then tie a live button, put the live button on the line cup, and then install the line cup on the top of the teardrop reel, install the teardrop reel, and then reel in the line.

Precautions for using the teardrop wheel

1, don't overfill the line, about two-thirds of the line is best. The size of the wheel is different, the capacity of the line is more or less, the diameter of the line is different and different, but in general, there is a 70 to 80 meters of line is enough. A simple reason is that, load line full, the coil radius is large, out of the line when the line wheel rotation is fast, when out of the line more than the Roadrunner flight will be easy to blow line.

2. When you are practicing, please use inexpensive nylon line to avoid unnecessary waste. When you are fishing officially, you can use PE line again.

3. It is best to cast your rod in an open area so that you can cast as you wish without worrying about hitting anyone.

4. It is not recommended to cast false bait under 4 grams with teardrop reel.

5. Please use heavier and bigger fake bait for practice casting, it is not suitable to use heavy lead instead.

6. In order to cast a longer distance, it is recommended to use a super stiff rod!