Snowflake ice machine is relatively common in the market a kind of ice machine. Through the snowflake ice machine made of ice, its shape is not fixed, more scattered, smaller particles of the shape of the snowflake ice, this fine ice can be very good into the narrow gap, and the cooling speed is relatively fast, the effect of the ice bath is very good. Because it has these characteristics and advantages, so the snowflake ice machine is usually is used in the laboratory, medicine and food manufacturing and so on.

Snowflake ice machine even if it has the best quality conditions, but in a long time of non-stop use, there will always be some big and small problems, once these problems will make the machine crash, stop running. In the face of these large and small problems, each problem is a corresponding solution, the following editor will introduce users to some common faults about the snow ice machine and its solutions.

Snowflake ice machine common faults and their repair methods

1, fault performance: the compressor has been working but not refrigeration

Reasons for failure: this is generally the case is the refrigeration liquid leakage, or two-way solenoid valve was damaged resulting in the closure of its caused by the lack of rigor.

Maintenance method: first check which part of the problem, if the refrigeration fluid leakage, the leakage, and then add the refrigeration fluid; if the valve is damaged, we must replace a new electric valve.

2, fault performance: the machine automatically into the dehydration program, (in which the pump stops operating, the compressor stops refrigeration), but the ice will not come off.

Reason: this situation is generally due to the machine's two-way solenoid valve damage

Maintenance method: generally is to replace a new solenoid valve body or external coil.

3, fault performance: water shortage light has been on, but the machine will not automatically replenish water

Reason: this situation is generally caused by two possibilities, one is the pipe inside the water, the second is the water solenoid valve malfunction, resulting in the valve can not be opened.

Maintenance method: first of all, we should look at the pipeline whether there is water, if there is water is generally a problem with the valve, we have to re-replace the new solenoid valve.

4, fault performance: the compressor is working, but the pump has not been operating.

Reason for failure: the pump may be damaged, or the pump inside the dirt caused by the phenomenon of blockage.

Maintenance method: this situation is to clean up the pump or more slip a new pump.

Snowflake ice machine using the precautions

1, to regularly check the inlet and outlet pipe joints, so that it is convenient to dispose of a small amount of residual water may leak

2, the compressor in the event of a sudden shutdown, do not start continuously, in order to avoid damage to the compressor

3, to regularly and promptly clean up the gall bladder of residual water, before wiping with a dry cloth. Residual water, wipe clean with a dry cloth

Snowflake ice machine failure can be big or small, but will always affect the operation of the machine, on the snowflake ice machine failure of the maintenance method I have been in the above want to do a detailed introduction to the user, I hope to give the user some help.

Tuba Rabbit online free for everyone to provide "each decoration offer, 1-4 local decoration company, 3 sets of decoration design program", and decoration to avoid pit strategy! Click on this link:/yezhu/zxbj-cszy.php?to8to_from=seo_zhidao_m_jiare&wb, you can get free Oh~