LaFerrari is a flagship supercar launched by Ferrari. It made its debut at the Geneva Motor Show in March, 20 13, replacing the Ferrari Enzo model with a limited number of 499 cars. Power: The 6.3-liter V 12 naturally aspirated engine can output a maximum power of 588kW, and the motor independently outputs 120kW, which makes the comprehensive output power of LaFerrari as high as 708kW. La Ferrari 0- 100km/h acceleration time < 3? Seconds, 0-200 km/h acceleration
The car model photographed this time is Ferrari LaFerrari, the scale is 1/24, and the brand is the Italian car model brand Burago. Ferrari's classic big red model has almost no moving parts, only the hood at the rear. The iconic gull-wing door is completely gone and not displayed. ...
Walking into the city on a rainy night, it is brightly lit, bizarre and dreamy like an oil painting. This feeling is very good, more atmospheric than usual ...? It rained by itself. It's raining ... The night is still, the rain is cold, the wind is like this, and the dream is empty. ...
LaFerrari's body has been sculptured, and the aerodynamic design features deeply influenced by F 1 are revealed here. The front and rear of the car highlight the extreme sports character of the sports car. Let every Ferrari have deja vu, but each has its own characteristics.
I think the profile is LaFerrari's most beautiful angle. Ultra-low body, five-wheel large size, wedge-shaped body, low air resistance. This car model restores the dynamic coordination of the real car in proportion.
Car models are made of aluminum alloy and plastic. Although the ratio of 1/24 is not large, it is very important to hold it in your hand.
Rainy roads will form distorted reflections on the ground, which is also one of the charms of rainy nights.
There is a small bump on the side, which is found by comparison with the real car. This is a side turn signal ... the brake disc will not rotate with the hub, and this detail is almost meaningless.
Seen from this angle, the car body is very low. There is an exhaust outlet for heat dissipation behind the front wheel. Of course, the car model has raised plastic, and there is no barbed wire design.
Many middle/rear sports cars will design a storage slot under the hood of the front, but LaFerrari gave up this storage slot for aerodynamic design. This car model can't open the gull-wing door, but the door line is still there.
The rearview mirror floating outside is very long. I guess it's one of LaFerrari's vulnerable parts.
LaFerrari is the first model manufactured by HY-KERS system in Ferrari history. The V 12 engine can output 800CV. The hood at the back is very big, and the orange one is the cable of the electrical system. The engine of this car model is made of a whole piece of plastic, not several pieces.
No matter how Ferrari's car shape changes, the design of the big round taillights has always been retained, which is a family element.
The shape of the rear is exaggerated, and the bilateral four exits are conventional designs. Fog lamp design from Formula Racing is also one of the highlights. Don't ask why it glows, just ask PS [bad smile].
The front face, upturned on both sides, looks very energetic and much simpler than the tail.
Rainy arrival, rainy night city
The rain wet the car body and many drops of water appeared. ...
The door won't open, so we can only look inside through the window. But Ferrari's windows are really small. Visually, the workmanship of the interior is acceptable.
The rain is getting heavier and heavier, and the water droplets are all real shots. Epidemic prevention products used: alcohol spray [pride]
The paint of this car model is still bright.
In order to better realize the rainy night scene in the city, I thought of some methods, which I think are quite rustic. The personal feeling of the effect is still average, and more adjustments and improvements are needed in the future, and there is still a considerable gap from the real shooting. ...
1- backstage production? I want to make a wide map of the night scene of the city. I have been searching for it for a long time on the Internet and found two photos with ideal angles. PS splicing, the color is gray, and there is a gray feeling in rainy days.
2- The shooting process? Two pieces of paper, a camera and a car model. With the help of surface lights and other supplementary lights, there is also alcohol spray to make water droplets. All kinds of angles, all kinds of shots.
3- Making three-dimensional figures. ? I want to make a three-dimensional effect and put it next to the car. In case the picture is too monotonous. ? First, take a photo and import it into 3D software as a background (this can better make a three-dimensional angle so as not to be seen through by a rollover), and make a three-dimensional effect according to the perspective of the photo. Then export the stereoscopic effect to the picture.
I choose to adjust in PS, and introduce the three-dimensional effect I just made. Of course, many places need to be repaired to be harmonious and true. For example, the angle of light, the drawing of shadows and reflections will increase the sense of reality.
4- Splicing of different lighting angles? In order to get more detailed photos, there is not enough rich lighting equipment. I chose many different light angles to shoot. Then, the appropriate part of each photo is intercepted and PS mosaic is carried out. Get a photo with rich details and soft light.
5 light effect? With the lighting of the car model, it is undoubtedly a step closer to the feeling of the real car. It is definitely the best way to connect the cable to the light. The so-called change the lights for two hours, PS only takes minutes [chuckle]? Observe the luminous principle, luminous angle, halo, reflective area, etc. Real car, and then PS drawing is adjusted to be as close as possible to the luminous effect of real car.
Thank you for reading the post and welcome your suggestions [Rose] [Rose] [Rose]