Point the long side of the rectangle at yourself. If there is a flower face, there is a flower face down. Fold the rectangle up and down and open it, leaving a long center line.
Fold the upper edge to the center line, and open the left 1/4 line. Then align the lower right corner with the upper edge, press out the upper half of the bisector in the upper right corner, open it, and you can see the intersection point between the bisector and the center line, and the right half will be folded to the left after crossing the intersection point.
Fold the upper right corner on the line 1/4 and the lower right corner on the line 1/4, and open it.
Fold the upper 1/4 strip down and pull the upper edge crease of the small rectangle to the right to get this figure.
Fold the long part in the middle of the small rectangle upward, and align the oblique crease at the lower part with the center line and flatten it.
Keep the crease below, pull out the right angle under the edge of the upper part, flatten it, then press the raised part in the middle under the strip and turn the strip down to the back.
Turn one side, align the right side of the rectangle with the left fold, align the lower right corner with the midline fold, and fold the right half to the left along the vertical edge of the folded triangle, leaving a crease and opening it, so that the left and right sides form a rectangular part. Making storage boxes from empty cartons
Preparation materials: all kinds of empty paper boxes (such as cans, moon cakes, biscuit boxes, toothpaste boxes, etc.), patterned wrapping paper, English newspapers, cardboard (used to increase the thickness inside).
A The storage box made of tissue paper box is just the right size for storing old tapes and other sundries.
B, a long toothpaste box, packed in English newspaper, can be used as a pen box with an inner box. It is a good sealing method to sew buttons and sealing lines at the opening.
C, add two drawers to a rectangular paper box with a long box of cosmetics as an inner box to make a jewelry box, which can accommodate earrings, necklaces and other small accessories.
D, three empty aluminum foil bags, cut open the box mouth, cleaned, dried, and pasted together, which can be placed on the desktop as a stationery box.
Unique jewelry boxes are handmade.
The unique jewelry box looks very creative and exquisite, and its predecessor is just a finished milk box!
Preparation materials: small milk box, beautiful wrapping paper, a small piece of paper rattan, pearl board, corrugated board.
1, cut the milk bottle mouth, and fold the four sides of the milk box into the above shape by pressing the edges.
2. Cut the favorite wrapping paper into long strips and stick them on each side.
3. Draw the size of the box mouth and cut out a square box.
4. Lining the thickness of a pearl plate in the box cover.
Empty cans of potato chips are used to make storage cans and multi-purpose pen holders.
Materials needed to make this pen container: empty cans of potato chips and colored wrapping paper.
A, the top half with plastic cover is sealed at the bottom and decorated, which is an elegant storage tank.
B, the lower part was originally a complete cylindrical jar, just need to package it, that is, it becomes a pen container.
Hand-made vertical shelf
Keep the original shape of the milk box and stack it into a vertical shelf.
Materials required for diy production:
4 long milk cartons, wrapping paper and photo glue.
1, first remove the bottom of the milk box as a basic part of the shelf.
2. Cut the milk carton diagonally and fold it into a triangle, as shown in the figure.
3. The finished triangle, as the base of the shelf, can make the whole body slightly inclined upwards, which is convenient for storing articles and not scattering.
4. After the bottom seat and the three basic shapes are packaged, they are stacked and bonded one by one, and you are done.
The production of creative cd racks with natural, rough and original flavor.
Materials to be prepared for making this creative work:
Corrugated cardboard (if the thickness is not enough, you can use two layers or add a layer of cardboard to increase the firmness) and branches of the waste paper box.
Manual production method:
Cut the corrugated cardboard on both sides with a width of about 37.5px at equal intervals, and then insert the branches to adjust the angle, and the cd rack can be completed.
Insert the CD horizontally into the incision on both sides, and put the album name outward for easy searching.
Handmade bookshelves
It looks good to make a unique and practical manual book and newspaper rack with these abandoned empty cartons and cartons!
Handmade materials to be prepared:
Cartons or cartons (about the size of magazines, books and newspapers), calendars and English newspapers (for packaging)
1, cut out a simple and generous shape, and paste it in English newspaper packaging, which is a practical book and newspaper shelf full of book breath.
2. On the diagonal of the carton, cut an arc into a fan shape, add recycled paper materials such as calendar paper, and after a little decoration, a durable and environmentally friendly book and newspaper folder will be completed.
Hand-made colorful and childlike animal storage boxes and lockers.
Materials to be prepared for making this storage box: discarded cartons and decorative paper.
1, the original waste paper box, it is best to choose rectangular and thicker.
2. Cut and fold the carton into a trapezoid as the basic structure of the lion.
Add the lion's face, use the paper to cut and paste, and outline the lion's shape, and you can complete the work.
What the box looks like when it is opened.
You can also design a favorite animal model and create a lovely animal storage box.
Manufacturing method of environment-friendly gift box
The following is a gift box that is very economical and environmentally friendly.
Preparation materials:
Milk box (long or small), wrapping paper, glue (or double-sided tape).
1, after removing the bottle mouth as shown in the line draft, draw a broken line on the milk box with strokes.
2. Use a ruler to assist the blade and gently draw a crease on the broken line.
3, according to the original cut crease, pinch off the bevel.
4. After folding four oblique angles, fix them in a rotating way.
5. Spread the paper with your fingers and sort out the shape of the petals.
6. The folded shape is shown in the figure, but it has not been completed until now. The purpose is only to fix the crease first, so that the shape can be easily folded after packaging and the outer case can not be wrinkled.
7. First unfold the original folded shape and stick it on the surface with wrapping paper, with about 100px reserved up and down.
8. Cut the opening into four pieces and fold them into flat stickers.
9. Fold the bottom paper in the general way of packaging gift boxes, and then fold it again according to the original folding method, and you can fold the exquisite gift box.