Nowadays, many people like to cook with firewood stoves, because the dishes cooked in this way are very fragrant, and many firewood stoves restaurants are also very popular. Friends who like farmhouse flavor may plan to build their own firewood stoves. In this issue, Xiaobian will take you to see the design of rural firewood stoves with three mouths and the related contents of bricklaying process of rural firewood stoves.

Three-mouth stove rural firewood earthen stove design

1, rural energy-saving firewood stoves

The firewood stove born in the new era has higher utilization rate and more energy saving.

2. Country firewood stoves

The older generation of earthen stoves made of earth-rock bricks.

3. Multifunctional firewood stove

Firewood stove with functions of boiling water and cooking.

Bricklaying process of rural firewood earthen stove

1, determine the construction location, open the flue and build a chimney.

Determine the specific position and temperature of the firewood stove, and excavate the smoke exhaust hole on the wall (the opening position should be sealed with mortar). At the same time, build a chimney outside the house, which must be higher than the roof, otherwise the smoke will choke home.

2, build by laying bricks or stones stove

Use ordinary bricks to build a stove body, including a stove door and an ash outlet.

3. Kitchen chamber

Bricks are used to build the stove chamber, and the space between the stove body and the stove chamber is filled with broken sand (solid ones can prevent smoke from escaping, and at the same time increase strength and prolong life).

4. Heat preservation and fire-resistant construction of stove chamber and stove surface

Protect the hearth with brick sand to prepare for the construction of refractory mud; In the construction of refractory mud on the stove surface, special attention must be paid to compaction. Use a pot to compact refractory mud above the hearth, and by the way, make sure that the pot will be installed in this position later. Finally, smooth and shape with refractory mud.

5, flue, fire ring construction

After ensuring that the refractory mud has a certain strength, dig back the flue, flue and fire stop ring in the circular pit pressed out by the pot.

6, warm water mouth, pot mouth construction

Warm water mouth and pot mouth have been placed before the construction of thermal insulation materials and refractory mud, so as to absorb and preheat, and water put into them can become warm water. The specific positions where all pots contact with refractory mud are surrounded by steel bars to ensure the firmness of the pot mouth, and then the kitchen surface is leveled with mortar to achieve the expected _ degree, generally 78cm _ degree.

7, tile decoration

Tiles shall be attached to all surfaces, and attention shall be paid to the specific position of the stove door and the tiles of the ash discharge port to be cut; Then install the flue partition of the stove door.

The design of the three-mouth stove rural firewood earthen stove and the whole content of the bricklaying process of the rural firewood earthen stove are arranged here for everyone.