Since ancient times, human beings have been eager to fly. The invention of modern airplanes makes flying in the sky a reality, and there are also airplane models designed with reference to airplanes for people to collect. In addition to buying ready-made airplane models directly, you can also make them yourself. Here are some steps to make an airplane model:
1. Handmade helicopter model with ballpoint pen cap
Material tools:
Ballpoint pen cap, paper clip, blue cardboard, double-sided adhesive or glue, scissors, paper cutter.
Production steps:
1. Take a ballpoint pen cap, make vertical and horizontal cuts at the bottom of the cap, make two little wings at the curved cut part, and use the curved tail as the fuselage of the helicopter model.
2. Take a piece of blue cardboard, cut it into two 5 cm long strips with scissors, make a cross, and stick it together with tape or glue as the propeller of the airplane model.
3. Bend the paper clip to make the landing gear of the helicopter model, stick the propeller on the fuselage with adhesive tape or glue, insert the landing gear into the fuselage, and the helicopter model made of ballpoint pen cap is completed.
Second, make a model airplane with cans.
Material tools:
Waste milk boxes, cans, cardboard, colored paper, pencils, thumbtacks, paint cans, scissors.
Production steps:
1. Draw the wing, tail and propeller of the plane on the waste milk box and cut them off with scissors.
2. Prepare a tall can, paint it outdoors and dry it.
3. According to the size of the sunken circle at the bottom, cut a piece of cardboard and stick it on, then drill a hole in the middle and insert a pencil.
4. Stick a big wing on the machine head, and stick two rectangular structures under the wing, the height of which is the same as the diameter of the can.
5. Stick on the other wing, cut horizontally at the bottle mouth of the jar, and then insert the tail wing.
6. Cut some yellow five-pointed stars with colored paper as decoration and stick them on wings and tails.
7. Install the propeller with thumbtacks, tie the string, and a model airplane that can be hung is ready.
3. How to make a rubber band airplane model?
Material tools:
Cardboard, straw, ice cream stick, propeller, rubber band and paper clip.
Production steps:
1. Stick two ice cream sticks to make them longer, and then stick a propeller with a rotating tube on one end of the ice cream stick. The rotating tube can be made of pen tube, pen core, etc.
2. Install a paper clip at the other end of the ice cream stick.
3. Cut off the wing and tail of the plane on the cardboard, and stick the wing on the upright ice cream stick with adhesive tape.
4. Install the rubber belt. One end of the rubber band hooks the rotating shaft of the propeller and the other end hooks the paper clip. Stick the tail on the end of the ice cream stick.
5. Make an airplane landing gear from a straw and stick it under the wing with adhesive tape, and a power airplane model is made. Rotate the propeller to store power, then throw it out and fly in the air.
Fourth, edit DIY model plane.
Material tools:
Ice cream stick, hot melt adhesive, clip.
Production steps:
1. Wash three ice cream sticks and dry them.
2. At the front end of the wooden clip, apply hot melt adhesive to the left and right ends of the metal wire.
3. Press the ice cream stick on the hot melt adhesive and fix it as the front wing of the airplane model.
4. Apply hot melt adhesive to the back of the clip and fix another ice cream stick, paying attention to the alignment with the wings on the other side.
5. Apply hot melt adhesive to the tail of the wooden clip, stick a short ice cream stick on it, cut off the round heads on both sides of the ice cream stick, apply hot melt adhesive to the cut-off part of the round head of the ice cream stick and stick it on the tail wing.
6. Fix it to ensure the round head is firm, and a mini toy airplane model is made.