Current location - Recipe Complete Network - Take-out food franchise - Ps Poster Art Character Making —— How to Make Art Character with PS
Ps Poster Art Character Making —— How to Make Art Character with PS
How does ps design poster art figures? How does ps design the artistic font of posters? Posters are widely used in China, whether it is Chinese style, Japanese character design or the combination of Chinese and Western. In this tutorial, we will introduce how to design a poster. 1, first open ps and create a new 2000x800 pixel document with a size of 72, as shown in the figure; 2. Hold down the key and drag the mouse to the right of the text, as shown; 3. Double-click this key, as shown; 4. Enter the menu and select Layer → Layer Style. 5. Now we need to name the font layer as shown in the figure; 6. Select the pen tool, set the objects of the layer to black and white respectively, and then click OK. At this time, the color of the copy will change. Next, we will input the fonts and display fonts we need, because we use more font types at this stage, and they also have display, printing and display. The logo of this bird's nest is to generate an online editor online. This website can give users directions.

How to do ps calligraphy involves the practice of calligraphy, and the relevant instructions are as follows:

Click the Insert WordArt button on the Drawing toolbar, select a vertical WordArt style, and then enter the album name "Family Album". The font is set to Handing Van Gogh Seal. If this font is not installed on the machine, it can also be set as official script. Click OK to finish inserting the WordArt.

Click the Format WordArt button in the WordArt toolbar, set the fill color and line color, and then click OK. Adjust the size and position of WordArt to make it in the correct position.

First, insert artistic words.

1. Place the insertion point where you want to insert the WordArt.

2. Execute Insert → Picture → WordArt, or click the Insert WordArt button in the drawing toolbar or WordArt toolbar to open the WordArt Library dialog box.

3. Select a WordArt style and click OK to open the Edit WordArt Text dialog box.

4. Enter the text to be set in the text box.

5. Select the appropriate font in the font list, and select the required font size in the font list. Click the bold or tilt buttons to further improve the font. Note: Only one font format can be used for words in the same WordArt.

6. Click OK and the WordArt will be embedded in the document. Tip: If you want to turn the text in the text into a wordart, you can select the text first and then insert the wordart.

Second, editing artistic words.

With the buttons on the WordArt toolbar, you can set the content, style, shape, font spacing and size of WordArt. If this toolbar is not displayed, you can right-click WordArt and select Show WordArt Toolbar, or execute View → Toolbar → WordArt.

The following describes the functions of the buttons on the toolbar.

Insert WordArt: Click this button to open the WordArt Library dialog box and insert a new WordArt.

Edit Text: After selecting a WordArt, click this button to open the Edit WordArt Text dialog box, where you can modify the text content.

WordArt: After selecting WordArt, click this button to open the WordArt dialog box, where you can re-select a style and replace the original style.

Format WordArt: Click this button to open the Format WordArt dialog box, where you can set the color, line, size and layout of the selected WordArt.

WordArt Shape: Click this button to further decorate the selected WordArt with the preset shape.

Text wrapping: You can set the text wrapping form of WordArt specially.

The letters of WordArt have the same height: letters with different heights can have the same height, such as lowercase "A" and "B".

WordArt Vertical Text: Makes the selected horizontal WordArt vertical. If it is vertical, this button is selected. Click it to make it horizontal.

Alignment of WordArt: If WordArt has multiple lines, you can use this button to adjust its alignment.

WordArt Character Spacing: Adjust the word spacing of WordArt.

After the layout of WordArt is set to floating type, three kinds of signs will appear around it. Drag eight white handles to change their size. Turn the green rotary handle to rotate it; Drag the yellow diamond handle to change its shape. In addition, you can also use the buttons on the drawing toolbar, such as fill color, line color, line type, dotted line type, shadow style and 3D shadow style, to decorate the wordart. Most of their uses have been introduced in previous tutorials. The settings of "Shadow Style" and "3D Shadow Style" will be introduced later.

Tip: Double-click WordArt to directly open the Edit WordArt Text dialog box. There are many kinds of PS artistic words. I'll tell you one of them below, but it can't represent all of them.

1. New 500*300 pixels? The background color is optional, as long as you like it.

2. Type the required text in random colors, as shown in the figure below.

3. Then create a new layer, add a gradient to the new layer, such as magenta and blue-purple, and pull a gradient, as shown below.

4. Put the layer with gradient color into the text, and then rasterize the text.

5. Use the blending option again to add strokes to the font and change the color to white.

6. Click the slope and landform to adjust it to the appropriate position.

There are various methods, look at the light words that suit you.

1. Create a new 500*300 pixel black background scene.

2. Text mask, input text (with colorful light), fill with white, and deselect.

3. Filter-Distortion-Polar coordinates (polar coordinates to plane coordinates)

Image-Rotate the canvas 90 degrees counterclockwise

4. Filter a hundred mirrors -Style-Wind (from the left) and use it twice (shortcut key CTRL+F).

Image-Rotate the canvas 90 degrees clockwise

5. Filter-Distortion-Polar coordinates (plane coordinates to polar coordinates)

6. Create a new layer, mode: degree superposition.

Gradient (reference: rainbow color) Open Photoshop to create a new document with the size of 1920× 1200 pixels. Then fill the background with dark color #1f1e1e. Select the background layer, delete layer > layer style > gradient overlay. Select gray (#707070) and white. The blending mode is changed to positive overlay with 60% opacity. The style is radial. Make sure white is in the middle. It can be seen that the edge of the image will be darkened after using the forward stack. Apply this gradient through the layer style, because you can add filters to the layer later, and then you can try different colors and filters now. Noise > add noise. Use 2%, Gaussian distribution, and make sure you choose monochrome. Adding noise to the gradient is great because it can make the gradient more subtle. Add text. I need calligraphy-style fonts. Here are mushrooms, which can be downloaded from. Enter kidnapping first. Now enter "be" directly under "kidnapped". Refer to the figure below for the letter position, and try to connect the letters such as "Bs". Enter the word "design". The connection between the end of "Y" and "D" is very important, otherwise the effect will not be good. To make the effect more attractive, let's add some rotating patterns. This is similar to the previous pattern tutorial. But basically you have to import a schema element and put it before the "A". With ShutterstocK, you can download it there. Put another element at the end of "n" in "Design". I use the same elements as the previous step, but it is a little smaller. Another pattern is connected with "Y". Now, we have got the text with patterns and transformed them into smart objects. In this way, you can edit it at any time. Then go to floor > layer style > gradient overlay. Pink and blue, the style is straight, 90 degrees. Select the projection after gradient superposition. Use the mixed mode of positive superposition, 120 degree angle, 5 pixel distance and 20 pixel size. After setting the projection, select the bevel and relief. Using the inner slope style, the method is smooth and the depth is 190%. The direction is upward, the size is 6 pixels, and it is softened to 8 pixels. The settings used for the shaded part are as follows: angle 120, height 30. The highlight mode uses a color gradient and white, and the opacity is 75%. Then the shadow mode is positive superimposed black with opacity of 45%. Select an outline. To copy the text layer, the first thing to do is to change it to 0% padding. So there will be no color, but the layer style can still work on this transparent layer. Disable gradient overlay. Use bevel and relief, change the direction to downward, and increase the depth by 370%. Size 2 pixels, softening 8 pixels. Now look at this shadow. Change the angle to 145 and the height to 25 degrees. Highlight mode is color filter, color is white, opacity is 100%, and shadow mode is 0%. Copy the text layer again to make it more effective. Copy the text layer again. But this time let's edit the bevel and relief. Change the softness to 1 pixel. Highlight mode uses color to brighten 70%. Shadows are also disabled. Now let's create a pattern in the design. Create a new file 40 pixels wide and 200 pixels high. Adjust the width of the background layer to 20 pixels. Fill the layer with a linear gradient from white to different transparent colors. Use 100% to 40% opacity gradient. Refer to the figure below. Edit > define pattern. Name it stripes, so you have a good pattern. Go back to the design, add a new layer and fill it with the created pattern. Rotate the layer of E799BEA6E59BE7AD 94313336353766 and change its blending mode to soft light. Command-click the text layer on the Layers panel. In this way, a text layer selection is created. This is very simple and useful. After that, go to Layer > layer mask > Show Selection. This mode will only be applied to text. Select all text layers and copy them. Go to layers > merge layers. After that, enter the filter >; Fuzzy >; Gaussian blur. Use the radius of the 10 element and press OK. Changing the blending mode to color filtering will add a good luminous effect to the image. Add some lighting effects. Create a halo using saved photos, whether with a brush or a lens halo filter. The images used are downloaded here. Put the glow into the design and change the blending mode to color filtering. After that, remove the image >; Adjust > hue and saturation. Choose coloring and change the tone until you get a color that matches the tone of the text, and the bright color exceeds the color of the text. Copy the lighting effect and move to another letter. Repeat the halo again and move to another part of the design. Go to Image > Adjustment > Hue and Saturation again, select Coloring again, and try to set the halo color to match the text color.

Import paper texture and put it on top of other layers. The image used is Shutterstock's. Then change its mixing mode to positive superposition.

You can also add a space scene similar to the one below, or put it in a messy background. In addition, if you want to add more light, just copy all the layers and merge them into a new layer, or directly press command +Alt+Shift+E, then apply Gaussian blur with a radius of 20 pixels and change the blending mode to see what you want to do. You can go. You're a designer. This website has a lot of useful things! I hope it helps you.

In fact, it is also possible to use PS as calligraphy without plug-ins. Type [use some beautiful fonts suitable for the whole picture] and then you can right-click the blending option and use various functions such as shadow and stroke to realize the word effect. Empty words are also completed in the blending option [blending option-fill opacity 0%- stroke (change color and size) or shadow and external light], and then you can draw the path with pen drawing and put it on the path for typing. The whole word can be a path shape instead of a straight line, and there are many things to explore, not just using the plug-in owo 1. Open Photoshop to create a new document with the size of 1920× 1200 pixels. Then fill the background with dark color #1f1e1e.

2. Select the background layer, delete layer > layer style > gradient overlay. Select gray (#707070) and white. The blending mode is changed to positive overlay with 60% opacity. The style is radial. Make sure white is in the middle. It can be seen that the edge of the image will be darkened after using the forward stack. Apply this gradient through the layer style, because you can add filters to the layer later, and then you can try different colors.

3. Now go to Filter > Noise > Add Noise. Use 2%, Gaussian distribution, and make sure you choose monochrome. Adding noise to the gradient is great because it can make the gradient more subtle.

4. Add text. I need calligraphy-style fonts. Here are mushrooms, which can be downloaded from. Enter kidnapping first.

5. Now enter "be" directly under "kidnapped". Refer to the figure below for the letter position, and try to connect the letters such as "Bs".

6. Enter the word "design". The connection between the end of "Y" and "D" is very important, otherwise the effect will not be good.

7. To make the effect more attractive, let's add some rotating patterns. This is similar to the previous pattern tutorial. But basically you have to import a schema element and put it before the "A". With ShutterstocK, you can download it there.

8. Put another element at the end of "n" in "Design". I use the same elements as the previous step, but it is a little smaller.

9. Another mode is connected with "Y".

10. Now, we have got the text with patterns and converted them into smart objects. In this way, you can edit it at any time. Then go to floor > layer style > gradient overlay. Pink and blue, the style is straight, 90 degrees.

1 1. Select projection after gradient superposition. Use the mixed mode of positive superposition, 120 degree angle, 5 pixel distance and 20 pixel size.

12. After setting the projection, select the bevel and relief. Using the inner slope style, the method is smooth and the depth is 190%. The direction is upward, the size is 6 pixels, and it is softened to 8 pixels. The settings used for the shaded part are as follows: angle 120, height 30. The highlight mode uses a color gradient and white, and the opacity is 75%. Then the shadow mode is positive superimposed black with opacity of 45%. Select an outline.

13. To copy the text layer, the first thing to do is to change it to 0% padding. So there will be no color, but the layer style can still work on this transparent layer. Disable gradient overlay. Use bevel and relief, change the direction to downward, and increase the depth by 370%. Size 2 pixels, softening 8 pixels. Now look at this shadow. Change the angle to 145 and the height to 25 degrees. Highlight mode is color filter, color is white, opacity is 100%, and shadow mode is 0%.

14. Copy the text layer again for better effect.

15. Copy the text layer again. But this time let's edit the bevel and relief. Change the softness to 1 pixel. Highlight mode uses color to brighten 70%. Shadows are also disabled.

16. Now let's create a pattern in the design. Create a new file 40 pixels wide and 200 pixels high.

17. Adjust the background layer to a width of 20 pixels. Fill the layer with a linear gradient from white to different transparent colors. Use 100% to 40% opacity gradient. Refer to the figure below.

18. Go to Edit > Define Pattern. Name it stripes, so you have a good pattern.

19. Go back to the design, add a new layer and fill it with the created pattern.

20. Rotate the pattern layer and change its blending mode to soft light.

2 1. Press the command key and click the text layer on the Layers panel. In this way, a text layer selection is created. This is very simple and useful. After that, go to Layer > layer mask > Show Selection. This mode will only be applied to text.

22. Select all text layers and copy them. Go to layers > merge layers. After that, enter the filter >; Fuzzy >; Gaussian blur. Use a radius of 10 pixels and press OK. Changing the blending mode to color filtering will add a good luminous effect to the image.

23. Add some lighting effects. Create a halo using saved photos, whether with a brush or a lens halo filter. The images used are downloaded here. Put the glow into the design and change the blending mode to color filtering. After that, remove the image >; Adjust > hue and saturation. Choose coloring and change the tone until you get a color that matches the tone of the text, and the bright color exceeds the color of the text.

24. Copy the lighting effect and move to another letter.

25. Repeat the halo again and move to another part of the design. Go to Image > Adjustment > Hue and Saturation again, select Coloring again, and try to set the halo color to match the text color.

26. Import paper texture and put it on other layers. The pictures used are Shutterstock's, and you can download them there. Then change its mixing mode to positive superposition.

27. You can also add a space scene similar to the one below, or put it in a messy background. In addition, if you want to add more light, just copy all the layers and merge them into a new layer, or directly press command +Alt+Shift+E, and then apply Gaussian blur with a radius of 20 pixels to change the blending mode to color filtering. solution

1. First open photoshop to create a new canvas, and then create a new layer in the Layers panel.

2. Right-click the ps text tool and select the horizontal text mask tool.

3. Enter the required text in the ps canvas. At this time, ps will automatically create a quick mask. After typing, press Ctrl+Enter, and a text selection will appear.

4. Select the gradient tool in the ps toolbar, and then click the triangle of the gradient tool.

5. Select a color gradient in the gradient tool, or you can make your own gradient.

6. Drag the gradient to the text selection in the window to fill it.

7. At this time, press Ctrl+D to cancel the selection, and the ps color words will be ready.

The general steps are: type the text, click the text layer to create the working path, then click the path tool, and then use the pen tool to adjust freely.

Ps has many WordArt plug-ins, I hope you don't use them. WordArt can also use filters or styles to collect more styles. Every style is an artistic word, hehe.