The design process of the roll-up banner:

First open the required material website and then search for the roll-up banner or poster design you want to make.

Download poster design and other pictures as needed.

Then open it with a software tool to modify and organize it into the desired picture.

Installation of the roll-up banner:

The roll-up banner generally has a roller at the bottom with a spring inside, and the advertising screen can be rolled back into the roller when not in use. When you need to use it, pull out the cloth and use a stick to support it behind. When you need to use the roll-up banner, you can follow the following steps:

A. Turn the "roll-up banner" feet to about 90 degrees and place it facing down.

B. Peel off the sticky paper on the "roll-up" scroll guide, align and paste the finished picture, align the two ends, and make it flat.

C. Open the plastic cover at one end of the picture hanging strip, pull out the hard plastic core strip in the middle, (use a one-centimeter-wide double-sided tape to attach the hard plastic core strip to the upper edge of the back of the picture), and fold it Then put the metal tube back and cover it with the plastic cap.

D. Press the bottom end, pull the picture hanging strip with your hands, pull out the annular latch at the end of the "roll-up banner", and slowly put the picture into the "roll-up banner" (note: you must first Hold the hanging strip and picture, and then pull out the pin).

E. When using, take out the three-fold metal rod placed on the "roll-up banner" and connect it. Insert one end of the metal rod into the triangular plastic opening of the "roll-up banner", and then slowly pull out the picture. Just hook the hook of the picture hanging strip on the top of the metal connecting rod.

F. If you need to change the screen, pull out the picture, insert the pin into the original fixing hole, fix the screen, and then repeat steps A to D. 80cmx200cm roll-up screen size: 79x200cm (note: leave 1cm white margin at the top and 2cm at the bottom of the screen size).

How to use the roll-up banner:

A. Take out the main support pole of the roll-up banner;

B. Remove the bottom of the roll-up banner Open the two brackets so that they stand upright on the ground;

C. Install the main support pole and the bottom bracket;

D. Pull the net screen so that it is in line with the main support pole Connect well;

E. Adjust the installation screen to make it smooth and beautiful.