Install power cord
1. pry the protrusion of the circuit connector cover with a screwdriver? ;
2. Unscrew the clamping screw and three screws L-N-? Fasten the wire according to the following figure: blue (n) brown (l) yellow green (x)
3. Fasten the power cord and cover the circuit connector board;
4. Close the connecting plate cover.
Connect the wire to the main unit.
Install the standard plug, consistent with the data. The oven must be directly connected to the power supply, and a multipole circuit breaker with a minimum contact gap of 3 mm must be installed between the electrical appliance and the power supply. ? Multi-stage circuit breakers shall conform to the data sheet and current electricity consumption regulations. Multi-stage circuit breaker should not interfere with grounding wire. The angle of the wire contact surface should not exceed 50 degrees. ? The installer must ensure the correct power connection and observe the safety rules.
Start and use
When using the oven for the first time, close the oven door and adjust the temperature of the empty oven to the maximum heating for at least half an hour. Please make sure that the room is well ventilated before turning off the oven and opening the oven door. The oven may produce some slight odor, which is caused by the volatilization of substances used to protect the oven during production.
Start the oven
1.？ Turn the Selector knob to select the cooking mode you need;
2.？ Use the Thermostat to select the desired temperature.
3.？ When the "hot" indicator lights up, it means that the oven has been heated to the set temperature.
4. During cooking, you can do the following: Turn the Selector knob to change the cooking mode? -? Turn the "THEROSTA" knob to change the temperature; Turn the selector knob to the "0" position to stop cooking;
pay attention to
Don't put anything directly at the bottom of the oven to prevent damage to the enamel surface. ? Always put the cooker on the oven rack provided? Cooling and ventilation? In order to reduce the temperature outside the oven, some models of ovens will install a cooling fan between the control panel and the oven door to blow out hot air? ! ? When cooking stops, the cooling fan is still working until the oven is completely cooled. ? Oven lamp? Turn the selector knob to the light bulb position, and it will open. When the cooking mode rotates, it is still on.
How to use the timer
1.？ Set the buzzer and turn the "timer" knob clockwise for almost a whole turn.
2.？ Turn the button counterclockwise to set the required time: make the minutes on the timer knob and the indicator light on the control panel on the same line.
3.？ The timer measures time by minutes: when the selected time has passed, the buzzer will sound? The timer cannot turn off or start the oven.
We must have a good habit when using the oven. If the oven is not used, we must clean it and turn off the main switch, so that the oven will not waste electricity. Of course, we must pay attention to it when we clean the grill and baking tray built in the oven. It's best to use a special detergent, and don't wipe it with detergent at will. Warm reminder, the bottom of the oven also needs to be cleaned, just wipe it with a soft oven cloth.
Tubatu Online provides you with "each decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8 to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~