1. The installation of the chassis is mainly to unpack the chassis and install the power supply in the chassis.
2. Installation of CPU: Insert the CPU required for installation into the socket of the motherboard processor, and install the cooling fan by applying cooling silicone grease.
3, the installation of the memory stick, insert the memory stick into the motherboard memory slot, sometimes need more than one.
4, the installation of the graphics card, choose the appropriate slot according to the graphics card bus.
5. Install the sound card. The mainstream sound cards in the market are mostly PCI slot sound cards (some motherboards are compatible with graphics cards and sound cards, and this integrated card has poor functions, so you can choose whether to install the above hardware according to your own needs).
6. Installation of motherboard: Install and fix the motherboard inside the chassis (Note: In order to facilitate the installation of hardware on the motherboard, such as CPU, graphics card, memory stick, etc., please install the hardware on the motherboard in advance, and then install the motherboard into the chassis).
7, the installation of the drive, mainly for hard disk, CD-ROM and floppy disk drive for installation.
8. Connection between the chassis and the motherboard, that is, various indicator lights and power switch wires. The connection of PC speakers, and the connection of hard disk, CD-ROM drive and floppy drive power cord and data cable.
9. Cover the chassis cover (theoretically, the chassis cover can be covered after the host is installed, but in order to check the problem later, it is best not to cover it first and then cover it after the system is installed).
10, input devices are installed, and the keyboard and mouse host are integrated. At present, the mainstream keyboard and mouse interfaces are all USB interfaces.
1 1, the installation of output equipment, that is, the installation of the monitor, can be connected to the corresponding interface and power cord.
12. Check each line again and prepare for the test.
13. Power on the machine. If the monitor can display normally, the initial installation is correct. At this point, enter the BIOS for initial system setup.
After completing the above steps, the installation of general hardware has basically ended, but the following system installation steps are needed to make the computer run.
14, hard disk partition, can use the system disk's own format partition can also use special software.
15. Install the operating system, WindowsXP (Microsoft has stopped service, so it is recommended to choose an updated operating system), vista, Win7 and Win8 systems. If you need embedded development and design, install Linux and other systems.
16. After installing the operating system, install drivers, such as drivers for video cards, sound cards and network cards.
17,72-hour baking machine, if there is a problem with the hardware, it will usually be found in the 72-hour baking machine.
Matters needing attention
1, assembling a computer mainly starts from two aspects, one is the brand, and the other is the physical object. Use brand accessories, unambiguous. With the brand, but also to ensure that the brand is true. There is not much difference between fake brands and non-brands. Non-brand accessories cannot be compared with brand accessories in workmanship and materials.
2. Generally, there are three guarantees of service, which means there are three guarantees of service. If you have a problem and want to complain, you have a better chance of winning. Online shopping depends on whether the store has joined the Taobao protection plan, business reputation and evaluation.