1, Nepal electric pressure cooker fault code E0 analysis

(1) on the cover thermistor open circuit or short circuit (normal 100K/25 degrees Celsius), the solution is to replace the cover thermistor

(2) close the cover is not in place or agitation switch and its wiring failure, the solution is to close the cover normally, check the agitation switch and its wiring is normal, after the normal cover box. Micro switch contacts can be effectively closed.

The fault code E0 analysis and repair method applies to the following types of Nepalese electric pressure cooker

1, FZ11 fine control of the fire all-intelligent series CYSB40FZ11-90 ?CYSB50FZ11-100?

2, FC10 all-intelligent square series CYSB40FC10-90 ?CYSB50FC10

3, FC3 Gourmet Series CYSB40FC3-90 ?CYSB50FC3-100 CYSB60FC3-110?

4, FC5 Gourmet Series CYSB40FC3W-90 ?CYSB50FC3W-100 CYSB60FC3W-110 ?

5, YC5 gourmet series CYSB40YC5-90 ?CYSB50YC5-100 CYSB60YC5-110 ?

6, FC5 Shang Cuisine Series CYSB40FC5 CYSB50FC5 ?

Expanded Information:

? pressure cooker fault code E0, indicating that the bottom of the pot of the main sensor open circuit or short circuit

The cause of the problem and troubleshooting:

1, first check the temperature sensor wiring terminal inserts are loose or poor contact.

2. Check whether the temperature sensor is faulty. To measure the resistance value with a multimeter, if it is infinite, it is open circuit, if it is 0 ohm, it is short circuit, need to replace the new product.

3, check whether the control circuit board failure. Control substrate can not receive or send control signals, need to replace the control board.