Question 1: How to deal with unnecessary foam mats? First, beautifully illustrated flower baskets.

Prepare the following materials: 2 rectangular foam blocks with dimensions of 24cm (length) x 16cm (width) x 5cm, decorative lace, 1 piece of green decorative paper, 1 piece of purple silk cloth, calendar paper, 1 piece of pink cellophane, wire, scissors.

1. Glue two rectangular foam blocks together with a foam glue gun to form a whole block. The four edges of the foam block are trimmed into a soft and natural arc. Cut the green decorative paper and stick it on the decorative blue basket mouth. Stick two pieces of calendar paper on the other foam parts of the basket and cut off the extra parts. 2. Next, stick pink cellophane around the basket and pay attention to the four round corners of the basket. 3. Then, wrap the periphery of the basket tightly with silk, and cut off the redundant parts after leveling. 4. You can cut decorative lace to cover the interface between the silk cloth and the basket mouth, and then cut a long decorative lace and stick it on the basket surface obliquely. 5. Cut out the appropriate basket handle with wire according to your own preferences, wrap the wire with decorative lace and stick it firmly. Tips for family life: Leave 2cm at both ends of the wire to facilitate the fixing of the handle.

6. Apply glue to the end of the 2 cm long wire and insert it into the foam block. Insert flowers or various decorative flowers below, and make a beautiful decorative basket from foam board waste.

Second, DIY foam board letter decoration

DIY letter decoration of self-made foam board requires tools: letter foam board, dry glue, colored wrapping paper, pen and scissors.

1. Draw the outline of the letter foam board on the back of the colored wrapping paper with a pen.

2. Cut the envelope paper with scissors.

3. Stick the cut letter wrapping paper on the corresponding letter foam board with dry glue.

4. done.

Question 2: What can foam board do? Polystyrene foam board, also known as foam board and EPS board, is a white object formed by heating expandable polystyrene beads containing volatile liquid foaming agent in a mold. With the structural characteristics of fine closed holes, it is mainly used for building wall, roof insulation, composite board insulation, cold storage, air conditioning, vehicle and boat, floor heating, decoration and carving, etc.

As far as I know, his advantage lies in building thermal insulation, and other characteristics are not good, brittle, easy to drop slag, low strength, and easy to break even with a small force. It's not easy for you to do small work. I have only seen a small bench made by a master with several foam boards and tape. Can this be considered manual? It's easy to process, because its material is easy to separate. You can use a saw blade or a knife.

I don't know if it will help you, but I still think you should make small crafts or change materials, such as extruded board.

Question 3: What can the foam in the box do by hand? Depends on what kind of bubble it is. Let me show you a picture about the utilization of foam waste, and you can combine your own ideas to transform it.

Flowers cut with foam.

Foam board can be used for jewelry, small strips, pins on the side, and so on.

This is better, practical and beautiful. You can arrange the position and color of foam board according to your own preferences.

Question 4: What can foam do to practice hand sculpture? If it is serious, put some plaster on the outside, and the cost is low.

Question 5: What can bubbles do? The combination of manual foam cutting is very simple, as long as there are all kinds of toothless saws and word knives, but measuring tools are also indispensable. After cutting, it can be spliced and combined into what you want to do, just by simply connecting toothpicks and bamboo sticks. If the process is complicated and precise, some glass glue can be used for bonding. Do not use excessively corrosive glue. As for what to do, it depends on your interest.

Question 6: What can cartons and foam do? Hand-made foam sculptures are environmentally friendly.

Question 7: What can a piece of white foam paper do? Can it be made by hand? Materials needed for the method of making handmade flowers with foam paper: foam paper, soft mud or light mud, aluminum wire, scissors, glue, crepe paper and white latex. Detailed steps of how to use foam paper by hand: 1. Cut the foam paper into a heart shape with scissors, poke some small tips with light clay or soft pottery and insert them at the end of the aluminum wire.

2. Make light clay and heart-shaped foam paper into the shape of goose feet flower according to the DIY production order shown below.

3. Leaves made of paper cutting.

4. Stick the paper-cut leaves on the aluminum wire with white latex, and wrap the aluminum wire with green crepe paper to make green branches.

5, use crepe paper to tie the branches and leaves of foam paper goose web flowers together.

6. Handmade foam paper flowers made by this method can be decorated on the surface of many handicrafts.

Question 8: How to make a simple handmade foam boat model 1? Make the bottom of the boat: use a knife to shape a large piece of foam into a boat, and then use a knife to hollow out the middle.

2. Making a hut: Cut two rectangular pieces of foam with a small knife and connect them with toothpicks.

3. making red flags: cut two small red flags.

4. Making guardrail: Make the guardrail of the ship with 20 toothpicks, insert toothpicks regularly and smear with double-sided tape.

5. Manufacture of stair handrails: Make stair handrails with toothpicks and double-sided tape.

6. color.

Question 9: What can bubbles do? Hand-made polystyrene foam board is also called foam board. EPS board is a white object made of expandable polystyrene beads containing volatile liquid foaming agent, which is heated and preformed in a mold. With the structural characteristics of fine closed holes, it is mainly used for building wall, roof insulation, composite board insulation, cold storage, air conditioning, vehicle and boat insulation, floor heating, decoration and carving.

As far as I know, his advantage lies in building thermal insulation, and other characteristics are not good, brittle, easy to drop slag, low strength, and easy to break even with a small force. It's not easy for you to do small work. I have only seen a small bench made by a master with several foam boards and tape. Can this be considered manual? It's easy to process, because its material is easy to separate. You can use a saw blade or a knife.

I don't know if it will help you, but I still think you should make small crafts or change materials, such as extruded board.

Question 10: What's the best way to cut foam when doing manual work? How to cut? Advice, thank you. With a sharp art knife, the foam is fragile, and it is best to cut across the board.