1. Surface cleaning of olive stone carving: clean the stains and some slight stains on the surface with a wet cloth. If there are obvious burrs, it is recommended to polish them with 1500 mesh fine sandpaper.
2, hole cleaning: the hole of the olive core carving is the most prone to big burrs, and it is easy to break the beaded rope without treatment. It is recommended to clean it with assorted files.
Disk playback and cleaning
65438+
2. Play with your hands: Be sure to wash your hands before each game.
3. Beat the whole bead plate for a few days and keep it in captivity (clean) for several times with a wet towel. Oil is for people who are afraid of water. However, pay attention to one thing. After cleaning, please quickly wipe off the oil stain with absorbent paper and wipe off the water stain (it will not destroy the existing patina).
4. Cleaning of olive stone carving: It is recommended to use a hard brush for cleaning. You can use a small amount of oil. In summer, the sweat on the forehead and cheeks is not only clean (after soaking in the sweat tray) but also maintained.
Daily operation
1) Wipe the bead surface with a bath towel. The function is actually to clean up the wax layer and dirty color on the surface of the beads and re-polish them. It lasts about 2-3 hours a day for two to three days.
2) Polishing with a soft cotton cloth for a week is also considered. At this time, there will be red marks on the surface of the soft cloth, which is a normal phenomenon, and the color will fade after one week.
3) Leave it for a week. Let the beads dry naturally. At the same time, the surface will be in uniform contact with air, forming a fine and uniform oxide protective layer.
4) Start the handwheel. At this time, my hands must have just been washed and dried. If you are sweating, please don't serve directly. Pay attention to the plates around the bead holes. You can stew for about 30 minutes a day. After a week or two, you can feel sticky when you dry the beads. In fact, the beads have formed a thin patina.
5) At this time, it should be soaked with royal salt, otherwise the dead skin tissue on the hand will be acidified, and it is easy to produce fungi and cause skin diseases. According to each bracelet10g of royal salt and 500g of water. If multiple bracelets are degaussed together, the amount of defense salt will be increased without increasing the amount of water. Put the salt in the filter spoon, and then immerse the filter spoon in water. If a special bowl is used for degaussing for a long time, a tree-like substance can grow on the bowl.
6) Repeat the process of 4 and 5 for 5 to 6 times, that is, 3 months, and you will see that the beads are very aura. Well-coiled beads sometimes show strong reflections, some of which are like glass luster. It is important to note that if the beads are dirty, they can be wiped several times with a slightly wet cotton cloth. Then leave them for a while before playing. When you plate, try to plate all the areas of beads, especially the holes. Pan Zhu's most taboo is quick success and instant benefit.