Can I install the system by downloading the Dabaicai super USB disk boot creation tool? Or do I need to download the system?

Download the Dabaicai super USB disk boot creation tool. Of course, you cannot install the system. This is only the first step.

You also need a USB flash drive.

With these two items, you can make a PE bootable USB flash drive, but you cannot install the system yet.

To install the system, you also need an operating system image file (the suffix is ??iso),

and then release it to a folder on the USB flash drive.

If it is the Ghost version, there is also a system creation tool (ghost or oneghost). How to put the Dabaicai super USB boot creation tool into the system?

Put the system somewhere else , enter the USB drive and start using the tools inside to install the downloaded system. It can be placed on a USB flash drive or on a non-system partition of the hard disk. How to install the system using the Dabaicai super USB boot creation tool? Asking for a diagram

Please refer to this Chinese cabbage U disk installation system tutorial

How to use the U disk to install the system using iso files: tieba.baidu./p/4899490796 Is the Chinese cabbage PE system toxic? Chinese cabbage super U disk boot disk creation tool 4.1

It is not poisonous.... You can put it under the U disk scan and check... Chinese cabbage U disk boot disk production tool can be used Can you download the system to your mobile phone?

Is it possible, but there is no way to directly apply it to the mobile phone card

You need to install the mobile phone card into the card reader to make it

Can the Dabaicai Super U disk boot creation tool put the system on the U disk?

Win7 can be installed. These are the steps. I hope you will adopt them. It is recommended to download the system and install it using a USB flash drive. Installing XP/WIN7/WIN8 system with USB flash drive is divided into the following 4 steps: 1. Make a USB bootable disk. Here we recommend Laomaotao USB boot disk creation tool, just search it online. 2. Now that the U disk boot disk is ready, we still need a GHOST file. You can download a ghost version of the XP/WIN7/WIN8 system from the Internet, or you can use the GHOST backup system disk gho file yourself and copy it to the prepared U disk. Just boot the disk. 3. Set the computer startup sequence to U disk. Depending on the motherboard, the keys to enter the BIOS are also different. Common ones are Delete, F12, F2, Esc, etc. Enter the BIOS, find "Boot", and change the startup item to "USB-HDD" , then press "F10"-"Yes" to exit and save, then restart the computer and boot from the USB flash drive. When some computers plug in a USB flash drive, there will be a boot menu prompt when starting. For example, press F11 (or other function keys) to boot the computer from the USB flash drive. In this case, the computer does not need to enter the BIOS to set the startup sequence. 4. After starting the computer with a USB flash drive, run Laomaotao WinPE. The subsequent operations are the same as those on a normal computer. You can back up important files, format the C drive, partition the disk, and use Ghost to restore the system backup to install the operating system. Can the Dabaicai super USB boot creation tool install the Apple system?

It requires an 8G USB flash drive and network (download OS X system)

1. Make a lion recovery/installation U disk:

1. Format to FAT

2. Download the new version of lion and extract the dmg file inside

3. Use UltraISO or hard disk tools to directly convert the dmg Burn the file to a USB flash drive

4. Completed

2. Install OS X

1. Use Lion to install the USB flash drive and boot into the installation interface

2. Directly use the hard disk tool under lion to reformat the two damaged partitions into apple format and rebuild the partition table

3. Install lion (this is very fast, more than ten minutes) Chinese cabbage The super U disk boot creation tool has been successfully created, how to install the system?

U disk installation system steps:

1. Use the Dabaicai U disk boot disk creation tool to create a U disk boot disk. And download the genuine system image or pure version image, download the image file with the suffix ISO and copy it to the root directory of the U disk.

2. Turn on the computer and press the F2 key to enter the BIOS settings. Select the BOOT option—Secure Boot is set to " Disabled"Select OS Mode Selection and set it to CSM OS. Select Fast Bios Mode under the Advanced menu and set it to "Disabled". Press the F10 key to save and exit.

3. Restart the computer and press the F10 key to enter the fast boot startup, select the USB flash drive to boot into Windows PE, use the hard disk tool partition format, set the main boot partition to C drive, and use third-party recovery software to restore the image file Go to the C drive. Can the Dabaicai super USB boot creation tool install Ubuntu?

No, Dabaicai can only install Windows systems. To install Ubuntu, please use the hard disk installation method, or use wubi to write the image. to the USB flash drive and then install. How to use Chinese cabbage USB disk boot making tool to install the system?

U disk installation system steps:

1. First insert the U disk;

2. Open the Dabaicai U disk boot disk creation tool and double-click the desktop icon;

3. Pull down to select the drive letter and corresponding name of the USB flash drive;

4. The best mode is "zip-fat32", which has the best compatibility. You can also choose "hdd-fat32".

5. Click on the one-click production at the bottom of the window;

6. A prompt will warn that the USB flash drive will be formatted, click OK and wait for the creation to be completed

Chinese cabbage USB flash drive Boot disk creation tool: bigbaicai.