Current location - Recipe Complete Network - Complete vegetarian recipes - Homemade mini crane machine clip tutorial
Homemade mini crane machine clip tutorial

Doll machine clip handmade tutorials are as follows:

1. First of all, use the cardboard card into the cupcake box to divide it into an average of two parts, a part of the placement of small dolls, the other part of the box as a coin box and out of the box, the middle should be spaced out, as far as possible, the compartment is fixed with double-sided adhesive.

2. Use cardboard card to make two small boxes of the same size by hand, the smaller one as a coin box, the larger one as a box, the ratio of the boxes should be determined according to the size of the doll.

3. Use scissors to cut open the beverage bottle, leaving the bottom. On top of the half of the cake box that corresponds to the placement of the doll, make an opening and place the bottom of the bottle as an observation port. If you can't find one, you can use a hard clear plastic bag.

4. After the coin box and the outlet box are put in place, it basically takes shape. Corresponding to the coin box, the coin hole should be on the top of the box, and the outlet door should be on the side of the outlet box.

5. The final position is determined, cut a hole in the side of each, respectively, fork a stick; in order to be firm, the side, the door, etc. with a wide tape wrapped around a few more times, so that it is more stable.

6. Next, put some of the dolls in, shake them a few times to let them store naturally, and then throw a coin in, you can use the wooden stick to clip the doll you want to find a way to get it into the outlet box.

7. This is a simple mini crane machine is finished!