unscrew the valve on the gas tank counterclockwise by adjusting the knob of the valve body.
2. Check whether there is air leakage before ignition, and close the gate immediately if there is air leakage!
3. If the test is finished, press and hold the knob of the gas cooker safely, and then rotate it to the left until it smacks.
Precautions
(1) Always check whether there is any air leakage at the joint of the gas pipeline (gas tank) of the cooker, and use soap foam to wipe the important parts. If there are bubbles, it means air leakage, so it should be repaired in time.
(2) ignite first, then deflate, and then sit in the pan: the room should be ventilated, and the kitchen doors and windows should not be closed for a long time.
(3) If the gas tank is used, it should be placed upright in a place where it is easy to move, and it is forbidden to put it flat or upside down. The place where the tank is put should be cool, dry and ventilated, and there should be a certain distance between the naked flame and the radiator.
(4) When using gas, people should not leave for a long time, so as to avoid accidents caused by the wind blowing out the flames or the soup overflowing and dousing them. If there is air leakage, it must not be ignited to avoid explosion. It can only be used after the window is ventilated and repaired.
Extended information:
Maintenance and repair
1. Because electronic ignition is the starting point of a circuit composed of piezoelectric ceramics and metals, it is not suitable for food burned at ordinary times to drip over the stove, so as to keep the electrode part clean.
2. Clear up the situation that the burner is blocked in time.
3. In case of ignition difficulty, check whether the distance between the electrode and the stove body is too large, whether the ignition hole is unblocked, whether the piezoelectric ceramics fail (the fire is weak) and whether the metal components fall off. Otherwise, you should report to the affiliated office for repair in time.
Reference: Baidu Encyclopedia-Gas Stove