How to DIY Hand-made Paper Pen Container Method Illustration Now, everyone will share a lot of videos or illustrations on the Internet, and you can have a look, because it is very popular to manually customize these, such as printing and customizing these.
It's the first time to try to make this kind of thing with waste cardboard. Although it's not very standard, it feels really beautiful and practical on the desk, and it's also an environmental protection act!
If you like it, come and do it with me!
Materials: Corrugated cardboard (cardboard containing small appliances or fruit boxes, partitions, etc. can be used), wrapping paper, transparent tape, double-sided adhesive tape, white glue, iron wire and beads.
Production method:
1, cardboard cut according to size: 20* 15CM made into a pen container, and a pen container bottom was fixed with transparent tape. I chose to use a toothpaste box directly instead.
2. The width of 9.5CM+8.6CM+9.5CM+8.6CM and the height of 4. 1CM are combined into drawers with transparent tape, and the bottom is added to make two drawers.
3. The width of 5.6 cm+10CM+10cm+10cm+5.6cm and the height of10cm are combined into the main body with transparent tape and stuffed into "back" cardboard.
4. According to the size of the main body, make two "drawer partitions", fold them inward into an N shape, and fix them with white glue on the sides.
5. Make a roof with a width of 8CM+8CM and a height of 13CM, and cut out the position where the pen container can be inserted.
6. Stick a piece of cardboard on the bottom of the main body to make the thickness consistent. The wrapping paper should be attached to the periphery of the main body first, and cut at the corner. Then stick the inner wall of the main body inward, and cut four corners. Stick the side edge inward first, then stick it before and after, and stick the top properly in the same way.
7. Cut a square wrapping paper and stick it on the upper end of the main body, cut the center with a knife, stick it inside in sequence, and then stick it on the bottom.
8. The roof, drawer and pen container are pasted with wrapping paper respectively.
9. Drill two small holes with a spacing of 1.6CM in the front of the drawer, take three beads and thread them into the iron wire, then thread them into the drawer from the front, fold them inward in the drawer and fix them with adhesive tape.
10, the roof is fixed on the top of the main body with double-sided tape, the pen container is fixed in the concave position with double-sided tape, and it is finished by stuffing it into the drawer.
How to DIY hand-made cloth tiger method graphic tools/raw materials
Needle and thread cloth wool scissors cotton glue
Step method
One: cut out the required cloth sample, with two pieces of body on it, the long one is the stomach and the small one is the ear.
Two: turn three large pieces of cloth to the back and sew them to death.
Three: cut a hole in the belly.
Four: Fill the cut in the third step with cotton, and then arrange the shape evenly.
Five: sew the hole in the stomach.
Six: Turn the back of the cloth outwards, sew the arc part, and then turn it upside down with the front facing outwards.
Seven: Make a tiger's beard with wool and sew it with red thread as shown in the picture. Then cut out the eyebrows and stick them on.
Eight: Now let's make the tiger's eyes and nose. Let's sew the outer edge of the eyes first, then sew the black part, and finally stick the white part on it. Then sew up the nose.
How to DIY Hand-made Diced Meat Net Method Illustration How happy it would be to make a wind chime and hang it in the room? Let's teach you a very, very, very simple way to make paper wind chimes!
Prepare two colors of hard colored paper, fishing line (connecting the ball), branches, scissors, pencils and compasses for making the ball.
1, draw a circle with a diameter of 6cm on the cardboard and cut it out. About 40 balls are enough. If you want to make more abundant wind chimes, you can also make more.
2, cut to the center of the circle, need to set another ball, so leave a gap in the thickness of the paper.
Cut it as shown in the figure (see the scraps of paper thickness? )。
3. Embedding two balls of different colors together.
Completed the cross sphere. Now we're going to connect these spheres. In order to make the wind chimes more sensitive to the wind, I used a line thinner than the fishing line.
4. According to the order in the above picture, first the needle and thread passes through the edge of the red paper on the cross line, then knot it, and then pull it down along the cross line to pass through the edge of the gold paper. Repeat the same operation.
In this way, one ball is made, and the number of balls is about 5-6. "Shelf making"
1, prepare two branches, of course, branches are not necessary, and special shelves can be used if conditions permit.
2, after crossing with steel wire.
The paper wind chimes just made are hung on the shelf to complete the beautiful country-style wind chimes ~ In order to make them swell, the number of balls in each wind chime is different.
Step: Draw a circle with a diameter of 6cm on the cardboard and cut it out. About 40 balls are enough. If you want to make more abundant wind chimes, you can also make more.
Cut to the center of the circle, you need to cover another ball, so leave a gap in the thickness of the paper. Cut it as shown in the figure (see the scraps of paper thickness)
Color paper wind chimes DIY
Two balls of different colors are embedded together to complete the cross sphere. Now we're going to connect these spheres.
In order to make the wind chimes more sensitive to the wind, I used a line thinner than the fishing line. According to the order in the picture below, the needle and thread first pass through the edge of the red paper on the cross line, then tie the knot, and then pull down along the cross line to pass through the edge of the gold paper. Repeat the same operation.
In this way, one ball is made, and the number of balls is about 56.
After crossing, fix it with steel wire.
The paper wind chimes just made are hung on the shelf to complete the beautiful country-style wind chimes ~ In order to make them swell, the number of balls in each wind chime is different.
How to DIY Hand-made Snowman Illustration Take out white paper and draw a circle on the CD, cut it along the drawn edge, stick double-sided tape on the CD, and then stick paper on it.
Take out red paper and make a hat for the snowman (I use a red woven bag for waste utilization)
Cut out the snowman's eyes with black paper and cut out the snowman's nose with red paper.
Glue your eyes and nose with solid glue and draw a lovely mouth.
Stick two CDs together with double-sided tape.
Finally, make a lovely scarf for the snowman with red paper, and it will be successful. How about it? It's simple and beautiful. Come and do it!
How to DIY hand-made lamps The materials needed to make lotus lamps are: bamboo sticks (or carton packaging strips) 10, red transparent film paper 1 sheet, ordinary hard paper 1 sheet, white rice paper, pink (or red) pigment, green dyed paper, iron wire and so on. Steps: 1, skeleton making: tie 10 bamboo sticks (or carton packing strips) into a hemisphere shape and fix them, and expose an iron wire head with a length of about 1 cm at the bottom of the ball for placing candles; 2. Make the embryonic form of lotus: stick it on the spherical surface with red transparent film paper, and stick the bottom with ordinary hard paper; 3. Making petals: Cut 30 small rectangles with a length of about 8 cm and a width of about 6 cm with rice paper, find a pure cylindrical piston for rolling petals, which requires a cylinder and a piston sleeve, spread the rice paper block on the round body, then carefully wind it with a thin string, if you want the petals to be fine, wind it more, and then use the piston to pile up the rice paper, so that the original smooth rice paper will be fine. 4. Adjust the pink pigment, and then dip the petals in the pigment one by one. 5. Petals pasting: paste the finished petals on a spherical plain hard paper; 6, homemade lotus root, lotus leaf, one by one according to the position.
How to DIY hand-made environmentally-friendly clothes Illustrate the transformation of old clothes from shirts to aprons
Shirts are transformed into aprons. Old clothes are transformed with materials: old shirts, decorative ropes, punches, metal ring buckles and snap buckles. Steps for transforming old clothes: 1. Remove the pockets on the clothes for later use; 2. Draw an apron on the back of the shirt; 3. Cut off the collar, sleeves and redundant parts, and cut off the front button of the shirt to form an oblique angle; 4. Roll the edge of the cloth; 5. Install a pocket (it is very important to have a pocket on the apron, so you can put the tools you need at any time); 6. Make two holes in the front with a hole punch, put on a metal ring buckle and put on a rope. The front can be made of another cloth belt with buttons, buttonholes and sewing strips; 7. Install the snap button at the back oblique piece; 8. The cut sleeves can also be made into sleeves. An apron transformed from old clothes will be done.
Prepare a square piece of paper, fold both sides diagonally, and then unfold. Repeat the operation for the other half, and unfold.
Turn to the back
Fold four small squares into four small triangles with the same size.
Expand all four triangles.
Fold the sides symmetrically, and a beautiful dress will be displayed in front of everyone.
How to DIY Hand-made Christmas Ornaments Illustrate the old Christmas Ornaments We need to clean them up, and then we just need glitter glue to play freely.
You can prepare some glitter glue in various colors, and then draw pictures on these lovely trinkets according to your own preferences.
Give full play to one's artistic talent.
You will find that you have reshaped a batch of new Christmas ornaments!