1. Write an essay about the production process of a handmade product, about 700 words

On Saturday afternoon, I finished my homework and watched TV at home. The TV was talking about promoting environmental protection. In life, we must turn waste into treasure. Suddenly, I had an idea, why not do it myself and "turn waste into treasure"?

What to do? I was rummaging through my old wardrobe on the balcony and found my old white gloves, which I could no longer wear. That’s right! Use this to make a little white rabbit's head, put it on the pen holder, and use it as a decoration! I then found white thread, scissors, cotton, colored pens, red buttons, rubber bands, needles and colored paper.

First of all, we need to make a pair of ears for the rabbit, so we can only leave two fingers. Which two are left? I gave it a try and decided to keep both my index and little fingers. I inserted my thumb, middle finger, and ring finger. It was easier said than done! The thumb was still a little tight, so I opened the glove first, then pushed it in with my finger. The other two I couldn't fit in no matter how hard I tried. It seems that brute force is not enough. I thought about it and came up with a way: pull it in through the gloves. The shape of the ear was ready, but it couldn't stand up without supporting it. It drooped and looked unsightly. I thought of a good way to insert the two pulled-in fingers, the middle finger and the ring finger, into the index finger and the index finger respectively. In the little finger, it plays a supporting role. After a while, the bunny ears were completed.

After stuffing three fingers in, three small holes were left on the surface, which affected the appearance. I threaded a needle and thread to sew the three holes. I had never sewed a needle before. It was easy, but sewing was difficult. I almost pricked my hand when sewing. After sewing a few stitches, I gradually found the feel of my hand. The sewing became smoother and smoother, and I easily sewed the glove airtight.

The outline of the rabbit head was made, but there were some holes inside. It was too flat and would fall over when the wind blew. It was so weak that I stuffed a ball of cotton into it. To prevent cotton from falling out. I used a rubber band to tie the top of the glove opening.

It's time to make the bunny's face. I took another needle and thread and sewed two buttons on the rabbit's face. I used a black paint pen to add a black dot in the middle to serve as the rabbit's eye. Then, I took a pen to trace the nose on the yellow colored paper, traced the mouth on the black colored paper, and stuck it on the rabbit's face with double-sided tape. The white rabbit decoration had complete facial features. Finally, I put it on the pen holder and tied a ribbon around its "neck", which not only decorated it but also prevented it from tipping over. In this way, a vivid white rabbit decoration was born in my hands. I looked at my ingenious masterpiece and was very happy. The little white rabbit also smiled and looked at me with his eyes, as if he was praising me: "You are great!"

In fact, there are many items that can be turned into treasures. As long as you pay attention to everything, you can You can decorate your life more colorfully.

Through this hand-made work, I understand the truth: you must be patient when doing something, don’t just use brute force, you must be flexible, and you will always succeed! 2. For a composition for the second grade of elementary school, how to write about the process of hand-making?

This afternoon, we had an interesting hand-making class, and the teacher taught us how to make "little hedgehogs".

I first took an oval potato as the body of the little hedgehog. This potato looks more like a chicken. Then he took out a sharp toothpick and inserted it densely into the little hedgehog's body. It was the little hedgehog's extremely hard thorns. Then he took out a pencil pencil and put two small black dots in the middle of the potato to form a pair. With bright eyes, I took out the red pen again and drew a small crescent moon in the middle of the eye, which turned into the mouth of the little hedgehog. I put the little hedgehog on the desk and staggered around, unable to stand still. Like a tumbler, it turns out that I forgot to put the four legs on the "little hedgehog". I quickly put the four legs on it and put it on the desk. It didn't fall over. I moved it again and it didn't move. Oh, haha, my "little hedgehog" is done.

I took the "little hedgehog" home and put it on the desk for decoration. When I was bored, I took out the "little hedgehog" I made to play with.

The "little hedgehog" I made is so interesting!

my country has many traditional cultures, such as couplets, paper-cutting, pictures, embroidery, and many unique customs and habits. But I like paper cutting the most.

Paper-cutting is a folk art craft. During every New Year and happy event, people would cut out some auspicious words such as "囍" and "福" and paste them on doors and windows. Paper-cutting has a wide range of contents, such as flowers, birds, cordyceps, and the twelve zodiac signs... Every time I see the window grilles on everyone's windows, and the various paper-cutting pictures I see in books and TV, I both envy and marvel at people's dexterous handiwork. I really like this paper-cutting craft and want to learn it. It’s a pity that no one around me can cut paper. I can only play around with it by myself.

Once in a school art class, the teacher taught us how to cut paper, and we all happily took out colored paper and scissors. Some cut leaves, some cut little girls, and some cut castles... Although the students are all beginners and are not good at cutting, we are all very enthusiastic.

When will my wallpaper be put on the windows and walls of my home? I think my wish will come true! 3. Composition for the first grade of junior high school: My little production (production process)

Today I made a small production with my mother, called slippers.

It is made of green, red, pink, and purple crepe paper, cardboard, pencils, erasers, double-sided tape, and scissors. Let me introduce how it is made. The first step to make slippers is to cut the green crepe paper into six strips and make three strips into one small braid. In this way, two green small braids are completed. These two small braids are so beautiful! Just like the real thing. Then cut the red crepe paper into three strips, and braid the three strips into a small braid.

Then cut two strips of pink crepe paper, then cut a strip of purple crepe paper, and then use two pink strips and one purple strip to make braids. Finally, I stepped on the cardboard and drew two footprints.

Use double-sided tape to surround the edges of the cardboard, and then cut out purple crepe paper to surround the edges. At this moment, I showed an impatient expression and threw the cardboard to the ground. , it’s so troublesome to even think of a pair of slippers. At this time, my mother said: "Let me help you!" I carefully picked up the cardboard and used double-sided tape to stick the inner sole of the shoe, then wrapped the green braid around the sole, and then used the red braid to remove the green braid. Surrounded everywhere.

In addition, use a small braid to make a shoelace, then use purple and pink to make a bow, stick it to the shoelace, and finally you are done. I looked at this pair of beautiful slippers, which made me understand that I should not shrink back when encountering difficulties, and perseverance is the truth of victory.

My little project Today I made a small project at home, which is a beautiful little lantern. To make this small lantern you will need KT board, red paper, rope, Chinese knot and tape.

The tools needed are a ruler and scissors. I first used scissors to cut the KT board that my mother found for me into two rectangles of the same size.

Then use a ruler to measure the length of one of the long sides of the rectangle, and then divide it into four equal parts. Use scissors to cut it into four rectangles of the same size.

Then surround them into a rectangular barrel. Then use another piece of KT board to make a bottom and glue it on, so that the main body of the lantern is ready.

Then punch a hole in the middle of the bottom, pass the top of the Chinese knot through and secure it with a pencil. Then punch a hole in the two corresponding sides of the upper part of the narrow lantern, pass the rope through it, and tie a knot inside.

Finally, I cut two strips of lace from red paper and pasted them around the upper and lower ends of the lantern. I also pasted the window grilles I cut during the Spring Festival on the outside of the lantern. Such a beautiful and festive lantern is ready.

I was so happy when I saw the beautiful little lanterns I made by myself. 4. Composition of My Handmade Works

My Handmade Works Have you seen these three cats of different shapes in the photo? This cat with a lion-like face is a Persian cat, and it looks noble and mysterious.

Look, it is taking a leisurely walk in the garden.

This cat with a long and narrow face and a pair of clear blue eyes is a Siamese cat.

Its tail and silky lines are slender, and the tip of its nose, toes and tail have different fur colors than its body color, so its appearance looks particularly conspicuous. Look, it's sitting on the steps looking into the distance.

This lazy cat is an American Shorthair. It has beautiful silver-gray fur mixed with coordinated dark gray lines, making it look both elegant and agile.

Look, it is lying on the sofa and sleeping soundly. Do you know? These cats are handmade works made by me! My mother bought me several handmade books on "Three-dimensional Animal Making".

Whenever I have free time, I like to do small crafts. Let me introduce how to make a Persian cat: A Persian cat is composed of twelve parts including the body, front feet, shoulders, head, jaw, mouth, nose, left and right ears, and tail.

I first cut out the plan view of each part, and then folded, cut, and glued it according to the instructions and illustrations. Finally, combine these twelve parts and the Persian cat is completed.

However, it is easier said than done! Basically it takes half a day to complete a work. During the process, I encountered many difficulties, so I asked my mother for advice and analyzed and solved them together.

Do you want to do it too? ①②③④. 5. Composition for the fourth grade of elementary school, my little production

[Composition for the fourth grade of elementary school, my little production----Tumbler] Composition for the fourth grade of elementary school, my little production----Tumbler Text: \x05 My little production------How is the tumbler made? Let me tell you now! To make a tumbler, you must first prepare all the materials and tools for making a tumbler. Composition for the fourth grade of elementary school, my little production--the tumbler, composition for the fourth grade of elementary school "Composition for the fourth grade of elementary school, my little production--the tumbler" 》. The best materials are fresh eggshells, egg shells, duck egg shells, etc. You also need to prepare plasticine, eggshells, paper, scissors, tape, and colored pens. Once these materials are ready, you can make it. The tumbler is made in the following steps: first, use scissors to cut the paper into an oval; second, draw a clown on the oval paper; third, uncover half of the egg shell, put plasticine in it, and fill it with eggs. Fourth, use tape to put the eggshell and the clown together. In this way, a tumbler is ready. An ordinary eggshell can turn into an exquisite tumbler. In the process of making, both the It improves our hands-on ability and enriches our after-school life. 6. How to teach primary school students to write essays. My little production

That day, the teacher left a special assignment - making a small desk lamp.

On Sunday afternoon, I made a small desk lamp with "complete facial features". The steps for making it are as follows: Materials: a bottle cap, a length of lead wire, plasticine and a ping pong ball. Equipment used: one pair of scissors and one pair of pliers.

Production steps: First use scissors to poke a hole in the middle of the bottle cap, then use scissors to cut the table tennis ball into two halves, and poke a hole in the center of half of the table tennis ball. First pass the lead wire into the bottle cap, bend it with pliers, hook the bottom cover, insert the other end of the lead wire from the outside of the half ping pong ball into the inside, then roll the plasticine into a ball shape and hang it on the head of the lead wire.

In this way, a small desk lamp is made. Maybe I am a novice in making small desk lamps. The small desk lamps I make are always top-heavy and cannot stand up, as if they have no dignity.

I started to search for the reason. The first time I used scissors to pierce the bottle cap, it made a big hole at once, and it was more than enough to remove my little finger. It was a bit too big, so the second time, I changed the bottle cap and carefully poked a suitable hole.

When I was making the lampshade, I hesitated a little. Would I ruin a new table tennis ball like this? Finally, I steeled myself, unwilling to let the child catch the wolf, so I cut it and a new table tennis ball broke into two halves.

The most difficult step is to hook the lead wire to the bottom of the cover. The lead wire is thick and unstable, and the thin lead wire will not be able to withstand the weight of table tennis balls and plasticine. After several failures, I began to sum up my experience. I think 2 mm Lead wire is the best, it is strong and can bear the weight.

I put a lot of effort into inserting the lead wire into the bottom of the cover. An hour later, a clumsy and ugly little desk lamp was born. When my friends saw it, they all cast envious glances at my little desk lamp. I was particularly happy. I loved my little desk lamp even more. Even though it didn’t look very good, I spent a whole day concentrating my energy on it. It was born with the hard work of .

I believe that no matter what you do, you should do it seriously in order to do better. 7. The production process of a small production - Remote Control Butterfly

There is a string of wind chimes hanging at the door of my room. Whenever I walk by, it will make a sweet "ding-ding" sound.

Take a closer look and see that it is a small wind chime made by yourself. From a distance, it looks as beautiful as the one you bought. This wind chime is even on display! That was on a Sunday morning.

On Thursday, the teacher asked us to make a small production by ourselves and hand it in before next Tuesday. If we do well, we can participate in the exhibition. I didn't finish it on Friday and Saturday. There are only these few days left, so I have to do it quickly.

I first found a pair of disposable chopsticks and a few cans. The two leading "generals" were in the front, followed by "little soldiers" such as paper clips, nails and thin copper wire. The "weapons" scissors and hammer follow closely behind.

They lined up neatly and rested aside, preparing to "fight". The preparations are ready, let’s start next.

First, dig a square groove with one centimeter on one side with one of the chopsticks, and dig the same groove with the other chopstick. Cross the two chopsticks together and secure them tightly with nails, so that a cross bracket is ready.

At this time, use scissors to cut off the top and bottom of the can, leaving only the middle part. Then cut the middle part into several rectangular pieces that are four centimeters long and two centimeters wide and set aside.

Then string the paper clips together to form nine strips. Wrap the cut rectangular pieces around each paper clip, making sure to expose both ends. Use a hammer to lightly hit the rectangular pieces to fix them, just like this.

Be careful when hitting with a hammer. It would be bad if you stop hitting your hand. The rectangular pieces must also be placed properly, otherwise they will have to be dismantled and repackaged if they become crooked.

It took several hours just to wrap the slices. There is only one last item left. It is about to be successful, and I am very excited.

I patiently hammered two nails on each side of the cross and one nail in the middle. Finally, use copper wire to secure the paper clips and nails, and you're done.

I jumped three feet high, and the beautiful wind chimes are ready! After I handed it over to the school, the wind chimes were exhibited together with other works and people appreciated them. I couldn't be happier! This wind chime improved my hands-on ability and enriched our after-school life. My own carefully designed piggy bank is adorable.

The piggy bank is dressed in green. The green coat is dotted with a few lavender wild flowers, plus the colorful lace inlaid on the edge. It’s so beautiful! Let me introduce the birth of my masterpiece! Speaking of which, that was a coincidence. Once, my mother bought a box of iced black tea from the store, and someone gave her a lot of coins.

My mother didn’t say that coins were difficult to keep and could easily leak, so she asked me to keep them for her. I don’t have a piggy bank at home, where should I put it? I am worried, oh? The art teacher asked us to make a handicraft at home, and it was due the next day, so why not just make a piggy bank.

If you are thirsty, drink a bottle of iced black tea first! When I was about to throw the empty bottle into the trash can, I suddenly thought of using it. Wouldn't it be nice? It's good, but the neck is too small, making it inconvenient to put money in and get money out. With that, I cut off the neck of the bottle, leaving the middle and lower parts.

How can I report it to the teacher if it is so rough? Just add some flowers to decorate it.

Then look for it? I cut flowers from old clothes and lace from torn socks.

How to design a more beautiful design? I first cut a trapezoid out of purple cardboard, attached the lace to the bottom edge of the trapezoid, and put it together to form a desk lamp cover. Then I cut a circle and covered the seal to make a movable door. This way, I can put money and collect money. Money is convenient. Then stick a few flowers on the appropriate places on the bottle, and finally use colored pens to draw rainbows, birds and butterflies on the cardboard.

Doesn’t this piggy bank become a wonderful meticulous painting? Unfortunately, up to now, it’s still very spacious inside because I don’t have enough pocket money to pay! The total property is only thirteen yuan. However, there is one of the most precious coins inside, which you have never seen before. On the front is "Bust of Chairman Mao" and on the back is "Hangzhou West Lake".

But still very happy. ┏ (^ω^)=.