Drawer slide rail function
Drawer slide rail is a common accessory in furniture. It is a guide rail for drawers or other moving parts, and is often equipped with bearings. The material of the drawer pulley determines the comfort when the drawer slides. Plastic pulley, wear-resistant nylon and steel ball are the three most common drawer pulley materials. When sliding, it is quiet, comfortable and smooth, which is the best way to distinguish the quality of the slide rail. For cabinets, if the hinge is the heart of the cabinet, then the slide rail is the kidney. Whether large and small storage drawers can be pushed and pulled freely and smoothly depends on the support of drawer slide rails. Generally speaking, the bottom drawer slide rail is better than the side drawer slide rail, and the integral connection with the drawer is better than the three-point connection.
Drawer slide rail structure
The hidden three-section drawer slide rail has an adjusting nail structure. During installation, the height of the drawer can be adjusted with the adjusting nail, and then the drawer can be locked with the locking nail of the damping slide rail, so that the drawer can be pushed and pulled freely. If you want to remove the drawer, just pull out the lock nail of the slide rail and lift the drawer to separate it from the slide rail.
How to install drawer slide rail
1. First, decide what kind of drawer slide rail to use. Generally, three hidden slide rails are used. Please determine the length of your drawer and the depth of the counter according to certain data, so as to choose the corresponding size and install it on the drawer.
2. Secondly, assemble the five plates of the drawer, screw on the screws, put the drawer on the installed drawer after processing, so that the holes of the adjusting nails match, and then push the locking nails into the drawer and the slide rail.
3. Finally, to install the cabinet, it is necessary to screw plastic holes on the side plate of the cabinet before installing the rails removed from it. The slide rail is fixed one by one with two small screws. Both sides of the cabinet should be installed and fixed.
After the drawer slide rail is installed, align the two ends of the movable rail (inner rail) on both sides of the drawer side plate with the two ends of the fixed rail (middle rail), and then gently push it in, you will hear a slight click, indicating that the movable rail and the fixed rail have been linked, and the drawer can be pushed and pulled freely.
Precautions for installation of drawer slide rail
First of all, pay attention to the choice of size. For the drawer slide rail, the choice of different types of drawers is naturally different. When installing, many friends refer to how to disassemble the atlas with the slide rail of the drawer. In fact, for installation, the first one is the choice of size. Generally speaking, the length of the drawer slide rail should be the same as that of the drawer. If the slide rail is too short, the drawer will not be able to open and close to the maximum extent. If it is too long, it cannot be installed.
Secondly, learn to install from the reverse thinking of disassembly. In fact, for the drawer slide rail, the installation is still a relatively simple matter. The key is how to disassemble it. In some drawings on how to disassemble the drawer slide rail, there are more detailed disassembly steps, which can be disassembled well. So if you want to install it, you can think backwards and restore it step by step, and then you will know how to install the drawer slide rail.
Disassembly and installation are equally important. In daily life, the failure of drawers is sometimes really due to the failure of slide rails, so once the slide rails fail, the removed slide rails are replaced with new ones. Therefore, it is very important how to disassemble the drawer slide rail, and its step-by-step guide should start from which aspects to disassemble, so as to master certain skills.