Catharanthus roseus is a veritable flowering machine, which can blossom from early spring to early winter. Besides, it loves to explode and looks good! However, if your Catharanthus roseus doesn't bloom until now, you should be ready to pinch it!

Operating steps:

1. Catharanthus roseus must be picked in time if it wants to bloom more. Starting from the seedlings, cut off the head of Catharanthus roseus, that is, remove its top edge. 2. Put the pruned Catharanthus roseus branches in a place with good scattered light to dry for 2-3 days. When the wounds are dry, move them to a well-lit place to dry. In less than half a month, you can see that new lateral branches have grown on the pruned branches, and they will all be flowering branches in the future. 3. If Changchun has been cultivated for 1-2 years without changing pots, the branches will become lignified, the whole plant shape will be particularly ugly, and the flowers will be sparse, because Catharanthus roseus is a new branch. If there are too many old branches and there is no activity, you certainly don't like flowering. 4. Cut Catharanthus roseus cruelly. Only the thick trunk of Catharanthus roseus was kept, and other parts were brutally cut off. After pruning, put it in a sunny place to bask in the sun, and soon you can see it grow new branches and prepare to bloom! 5. Don't throw away the pruned Catharanthus roseus branches. Prepare perlite or vermiculite, insert branches into the soil, water them once, and maintain them in a place with good scattered light. After about half a month, you can see white roots on the branches when you pull them out. This is cutting survival!

Margaret pinched it and immediately turned into a big flower ball!

Margaret is also a must-have flower in spring. When it doesn't bloom, it looks like a dish, but when it blooms, it is very beautiful. It is definitely the best choice for a small garden in spring!

Operating steps:

1. Margaret had to constantly extract her heart from the young seedlings. Basically 6 to 8 centimeters, she has to pinch her head. 2. If it is found that Margaret has sprouted small buds, in order to make its plant shape fuller and flowers more beautiful, you can also pinch off those scattered small buds that come out directly. 3. Pinch off Margaret's coat or cut off its coat advantage with scissors, then put it in a place with good scattered light, dry the wound and relieve it for a few days. You will soon find that Margaret has sent out new branches. Margaret is a flowering plant with new branches. The more new branches are issued, the more flowers will bloom. When Margaret's plants are full, you can spray them with Huaduoduo No.2 to make them full of buds! 5. For the cut branches, you can choose some thick vermiculite and cut it directly into larger particles. They take 10- 15 days to take root and survive!

Goldfish spider orchids don't bloom, cut them!

Goldfish chlorophytum leaves are green, and beautiful little goldfish can appear when flowering, which is a flower that many people will raise at home. But why are other people's goldfish chlorophytum full of buds, while yours is only a pot of green? Let's trim it!

Operating steps:

1. Goldfish and chlorophytum that have been kept for a long time, if they are not pruned all the time, will make the branches in the flowerpot grow uneven and green like vegetables, and will not bloom at all! 2. Find a pair of scissors directly and trim the goldfish chlorophytum. First, cut off the overgrown branches, weak branches and dense branches to make the whole plant look fresher and more ventilated. 3. After that, prepare for topping and coring. After removing its top advantage, paying attention to basking in the sun can make it send out more new branches and make the whole plant fuller. Spraying Huaduoduo 2 in time before flowering can turn these new branches into flowering branches! If your goldfish and chlorophytum have grown old piles, then the branches that are too long and too dense should also be cut off. After pruning the old pile, the ventilation between branches is smoother and will not be airtight. In addition, you can also trim it according to your own mind and make the goldfish chlorophytum into your favorite shape! 5. Don't throw away the pruned branches of the goldfish chlorophytum, just prepare some wet soil and cut the goldfish chlorophytum directly. Wait another month or so, the goldfish chlorophytum will emerge from the roots and become new seedlings! : After a winter blossom, the longevity flowers in spring have withered. If you want it to grow wildly in spring, you must pay attention to pruning!

Cut longevity flowers, spring buds come and go!

1. For long-term spring, we must cut off the remaining flowers in time. If you want it to grow leaves in spring and rejuvenate, start pruning from the two pairs of leaves under the flowers and cut off the rest of the flowers.

2. After pruning the residual flowers, observe the whole plant. If there are too many airtight leaves at the bottom, you can also cut off some big leaves at the bottom. If you find overgrown branches, cut them off in time. 3. If you want the longevity flower to grow new leaves, you can give it some flowers 1 or compound fertilizer and slow release fertilizer in spring. At the same time, pay attention to topping it to promote the development of lateral branches, so that more buds can emerge and the plant type will be fuller! 4. Don't throw away the cut branches either. The skin of longevity flower is easy to raise. Cut the branches into the soil, wait for about 20 days to take out the new roots, and then transplant them into new flowerpots to harvest the new seedlings of longevity flowers!

Operating steps:

In the spring of 2008, the temperature gradually increased, and the growth rate of hibiscus became faster. If you want to turn hibiscus into a flowering machine in spring, you have to prepare for pruning now!

Small hibiscus flowers should be cut hard in spring, and the more they are cut, the more they open!

1. Hibiscus is basically a new branch, so when it is warm in spring, you can top it, remove the top advantage, and let it grow more lateral branches, which will be fuller, bloom more and more beautiful! 2. Insufficient lighting conditions at home will lead to excessive growth of hibiscus branches. Even if it blooms at this time, its flowers will be sparse and look particularly ugly. 3. When these little hibiscus flowers fail, find a pair of scissors to cut off the branches, leaving only the main branches and cutting off the remaining new branches and weak branches. 4. Pruned hibiscus should be placed outdoors or in a well-lit place, such as Nanyang Terrace, to get more sunshine. Generally, about 10 days, hibiscus will slowly grow new branches. It will bloom again after more than a month, and the plant shape will be better than before.

Operating steps:

Morning glory in spring is a beautiful time to bloom. Keeping a few pots at home, whether on the small window or hanging by the window, adds a different color to spring! If your Petunia is going to fail now, you should be ready to cut it off!

Petunia blossom scissors, open the next crop immediately!

1. After the Petunia at home is defeated, the remaining flowers can be picked, and a pair of leaves under the flowers can also be cut off together to avoid unnecessary nutrient consumption. 2. After pruning, add some nutrition to Petunia to promote rejuvenation. For example, Huaduoduo 1, compound fertilizer, slow-release fertilizer and so on. You can mix water and pour some water on Petunia, and homemade rice washing water and peel water can also be used to supplement the nutrition of Petunia, which will soon make Petunia sprout and bloom again! 3. In the growing period of Petunia in spring, everyone should remember to go to the top and core in time to let it send out more green side branches. With more lateral branches, the whole plant shape will look better, there will be more buds and flowerpots will be more beautiful in the future! Image from | Happy Family

Operating steps:

As a heat-resistant and sun-resistant blue snowflake in summer, it also began to grow wildly with the increase of temperature in spring. At this time, you must trim it quickly, otherwise it will be difficult to bloom in the end!

Lan Xue spring cut, immediately full of potted flowers!

1. Blue snowflakes at home will start to grow many new branches in spring, but if these new branches are not pruned, they will grow out of order, consume excess nutrients and even be restricted from flowering. 2. Cut off the messy branches in Lan Xue in spring, or prune them at this time. Whether you want to make it into the shape of a lollipop or have more umbrella-shaped branches, you can trim it in spring. 3. After flowering, blue snowflakes can also be cruelly pruned, cutting off residual flowers and messy branches. If it grows too messy, you can also leave only the main branches and cut off the twigs, that is, cut a flat head and let it grow new leaves again! Author |rollcloud88:

Operating steps:

As soon as April comes, the buds and branches of many Chinese rose flowers will open. At this time, you have to be tough. Only by hard cutting can the Chinese rose bloom bigger! In January and April, many roses are pruned. At this time, you can look at the branches left by previous pruning. If the branches do not grow and die directly, cut them off quickly, otherwise they will rot easily and cause bacterial infection. 2. Chinese rose grows wildly in spring, with many more branches. If vines and inner branches are found, they should be cut off in time to prevent these branchlets from consuming nutrients and affecting the spring flowering of Chinese roses! 3, spring rose, especially love long blind branches and buds.

There are no buds and flower buds at the top of blind branches, only some blind buds that will not become flower buds. These blind buds and branches should be cut off as soon as possible to avoid nutrient consumption of flower branches.