Current location - Recipe Complete Network - Complete vegetarian recipes - What simple method can be used to remove the remaining glue from a wooden table?
What simple method can be used to remove the remaining glue from a wooden table?

1. Eraser

The eraser is also very effective in removing traces of transparent glue, but it is only suitable for small-scale traces and needs to be wiped slowly and repeated many times. Because the eraser can erase colored areas, you should erase it slowly when using it on colored areas.

2. Wet towel

General offset printing is difficult to remove because it lasts for a long time. We can use a wet towel to soak the area with offset printing, and then wipe it slowly, but this method is limited to places that are not afraid of getting wet or getting water.

3. Alcohol

When using this method, you must first make sure that the area to be wiped is not afraid of fading. Use a cloth with alcohol and gently wipe it back and forth several times until it is wiped off. . It is recommended to use caution when using alcohol.

4. Dishwashing liquid

Dishing liquid can also remove traces of transparent glue. Use a rag to take some detergent and wipe it gently.

5. Ordinary nail polish remover

Because nail polish remover contains chemical components, it is also very effective in removing traces of transparent glue. Pay attention to safety when using nail polish remover as it has a certain impact on chemical products.

Extended information:

How to remove double-sided foam tape

1. If it is attached to the wall, you can use a sharp object to scrape a small corner, and then Press the small corner with your hands and tear it down. This method is more tiring, but it won't leave any traces.

2. If it is attached to plastic, first dip a towel in hot water to soak all the foam double-sided tape, then find the small corner and slowly scrape it off.

3. If it is attached to the glass, you can try to use scouring powder. Take some scouring powder and put it on a semi-wet rag, and wipe it back and forth a few times. If it is a hard mark, you can wet the mark first and then use scouring powder.

4. First soak a rag in warm water, and then wipe the traced area. While wiping, usually spray detergent. The offset printing will soften after a while and can be easily removed.

Ifeng.com - Remove traces of transparent tape in this way

Ifeng.com - Tips for removing tape traces