When the outlet hole in the refrigerator is blocked, it will often cause a lot of accumulated water in the refrigerator. To solve this problem, it is necessary to clear the blocked outlet hole of the refrigerator first. If you don't know that the outlet hole of the refrigerator freezer and the drain hole of the refrigerator are in the back.

Tools/materials: a cotton swab or chopsticks.

1, daily use of the refrigerator, when it is found that a large amount of water is often generated on the bottom plate of the refrigerator fresh-keeping cabinet, then it may be that the outlet hole of the refrigerator is blocked.

2. At this time, you can use a dry rag to suck up the accumulated water in the refrigerator first, so as not to get water everywhere in the next step.

3. After the accumulated water is dried, you can find out the outlet hole of the refrigerator. Generally, the outlet hole of the refrigerator is in the fresh-keeping cabinet above the refrigerator. When the fresh-keeping cabinet is opened, you can find it at the back of the middle layer inside.

4. As shown in the following figure, when the fresh-keeping cabinet of the refrigerator is opened and the items on the middle layer of the fresh-keeping cabinet are removed, the water outlet hole is found at the back, and there is also a water guide groove at the position of the drainage hole.

5. Wipe the inside of the sink first. If the outlet hole is blocked, you can slowly get the blockage out with a cotton swab or chopsticks, and then wipe the hole clean, so that the blockage of the outlet hole of the refrigerator is solved.

6. The outlet hole of the refrigerator should be checked from time to time to avoid too many blockages. After getting under the hole, it will be very troublesome to dredge it. In addition, in order to reduce the situation that there is too much condensed water and too high humidity in the refrigerator, the items with excess water should be drained and emptied before being put in.