The 360 ??copier displays a fault, which may be caused by various reasons. The following are some common faults and solutions:

1. The machine does not work

If The machine is not responding. Check if there is power. If there is power but it still does not work, the copier's power switch may be faulty and needs to be checked and repaired or replaced.

2. The machine cannot copy

If the machine cannot copy, it is usually because the paper is not placed correctly or the original copy is copied. Check whether the paper is placed correctly, whether the original is placed correctly, and then try copying again.

3. An image appears on the reverse side

If an image appears on the reverse side of the copy, it may be that the lens of the copier is not clean or the lens is scratched. Clean the lens or replace the lens promptly.

4. The copied image is not clear

If the copied image is not clear, it may be that the lens is not clean or the lens is worn. Check to see if the lens is clean. If it needs cleaning, use a professional cleaning agent and be careful not to damage the lens. Also pay attention to changing lenses.

5. Pull bar failure

If the copier's pull bar fails, it may be that the spring of the pull bar is loose or other mechanical failure. The tie bars need to be inspected and repaired or replaced.

In short, when dealing with copier failures, it needs to be analyzed and dealt with according to the specific situation, and one size cannot fit all. At the same time, the machine must be kept clean and maintained to prevent malfunctions.