Friends who often play with Wan Wen gourd must know that the faucet of gourd is very fragile. In order to better protect the faucet of gourd, here is a way to wrap the red line around the faucet of Wan Wen gourd!

First, you should have a red rope. Whether you are positive or negative, notice that the cut line is upward. The length of stay is up to you, and don't exceed the place where the faucet can be wrapped. Look at the picture below and talk!

After tying, turn the cut line to the inside of the faucet bend (the straight faucet is free), so as to keep the whole beautiful and natural, and then tighten the rope, otherwise it will be loose.

Drag the long rope and wrap it around the faucet. Pay attention to hold down the short rope, slowly wind it, and let the short rope press in, out of sight. Pay attention to a little harder and tighten it.

Round and round, all the way up

Pay attention to the tight entanglement between lines, don't leave gaps, it will be ugly. At the end of winding, thread the thread into the loop to hold it down.

Then carefully turn into the corner of the faucet or under the faucet with side branches, as shown in the above picture.

Cut off the assembly line and be careful with the lighter. In order to prevent diffusion, you can apply less 502 or other glue with greater adhesion here. In short, everything is to prevent it from opening.

It's over. Simple. Today, I made a fool of myself here. I hope the immortals don't dislike me. What's a better way to play the gourd faucet? Let's communicate together!