It must not be too difficult for children to make lanterns, and the lanterns they make are even more beautiful. What should they do? Xiaobian now shares how the children at home make lanterns. After reading the detailed steps, I believe the children will follow.

Tools/raw materials

more

Scissors, a pair of double-sided adhesive, a colored paper, a plastic bottle.

Methods/steps

110 step by step reading

Prepare all the tools and materials to be used, as shown in the figure.

2/ 10

First, use scissors to split the plastic bottle in half according to the ratio of 3:1,as shown in the figure.

3/ 10

Fold the colored paper horizontally first.

4/ 10

Fold it horizontally and then vertically, and then fold it back and forth evenly as shown in the figure.

5/ 10

Cut the lines with scissors, but don't cut the middle part, as shown in the figure.

6/ 10

Then open the cut paper completely, take the broken part on one side, and pull it with double-sided tape to remove the glue, as shown in the figure.

7/ 10

Then stick the part with double-sided tape on the cut lower bottle, and stick it all around, and the excess paper can be cut off.

8/ 10

Take four points from the middle part of the whiskers on both sides and stick them on the plastic bottle to fix them.

9/ 10

When the whole part is fixed up and down, the lower part is just the beard of the lantern. Check whether the effect you made is as shown in the figure.

10/ 10

Finally, stick the handle on it. You can put an electronic light bulb in the middle, so it will be beautiful at night.

matters need attention

In this paper, the bottle is taken from the lower part with a bottom, which is mainly convenient for putting small light bulbs, and the lanterns made can be lit.

The production of lanterns in this paper is suitable for children at all stages, which is simple and effective.