Most shower heads can only be removed by turning them counterclockwise by hand. If it cannot be disassembled, it can be unscrewed with a screwdriver. Shower, also known as shower head, was originally used to water flowers, potted plants and other devices. Later, someone converted it into a shower equipment and became a common item in the bathroom.

Installation method of shower head

The installation height of shower head is divided into two types according to the type of shower head:

Generally speaking, the nozzle exposed by the lifting rod is bounded by the water surface of the nozzle, and the distance is preferably 2 meters.

It should be noted that these data are only average data, and the actual installation of shower heads should be adjusted according to the user's height.

Surface mounted shower switch with concealed water pipes hot on the left and cold on the right, with the center spacing of 150 mm, the concealed water outlet on the wall surface should be flush with the ceramic tile surface, and the concealed water pipes inside should be vertical to the wall surface. After installation, the shower should be at a 90-degree angle with the wall.

In addition, the water pressure adjustment of the shower is also a key: in general, the water pressure within 1.5 kg is the most suitable for the shower. If the water pressure is too high, the shower will explode, and if the water pressure is too low, the shower cannot be used normally.

Matters needing attention in shower cleaning

1. Do not use strong acid when descaling, so as not to corrode the shower surface.

2. Don't wipe the surface of the shower with hard objects such as steel balls to avoid scratching the surface of the faucet.

3. Do not disassemble the shower for maintenance, improper disassembly will damage the appearance and internal structure of the product.