When babies add complementary food, they pay attention to nutrition, health and good absorption, and mothers believe that many of them can't do without the help of multifunctional soymilk machines in the process of making food. However, if the soymilk machine is used for a long time, there will be various problems. Next, I will introduce to you the common fault codes and maintenance methods of Jiuyang Soymilk Machine.

E 1- waterless alarm: when using the soymilk machine, you must refer to the water in the soymilk machine to add water and materials correctly. After adding them correctly, if they still fail, they should be sent to after-sales service for maintenance.

E2- Alarm of initial high water temperature: When using the soymilk machine, people's moisture should not be higher than 70 degrees. If the water below 70 degrees is used, it still can't work normally, so it should be sent to after-sales service for maintenance in time.

E3- Anti-overflow anomaly: Add materials and water correctly according to the instructions for purchasing soymilk machine, and send them to after-sales service for maintenance in time if there is still no response.

E4- Alarm for heating overtime: Add materials and moisture correctly according to the instructions, and if it still fails in normal use, it should be sent to after-sales service for maintenance.

E5- Abnormal input voltage: If the power supply is not abnormal when plugged in again, it should be sent to after-sales service for maintenance.

E6- Zero-crossing signal loss alarm: plug in the power again and confirm whether it is normal. If it still fails, it should be sent to the after-sales service for maintenance.

E8- Abnormal temperature detection alarm: it should be sent directly to after-sales service for maintenance.

In short, if the Jiuyang soymilk machine still fails after proper use, it should be sent back to after-sales service for maintenance in time, and it is best not to disassemble it privately.