There is no fixed answer to which line is generally used in the slide drift of the rock pole, and it needs to be selected according to the specific situation. The following is the approximate reference range:

1. When fishing for fish under one catty, you can use the No.1.5 main line with the No.1 sub-line.

2. You can use the main line of No.2.5 and the sub-line of No.2 when fishing fish of 1 kg to 1 kg.

3. When fishing for fish of more than 1 kg, you can use the main line around No.5 and the sub-line around No.4..

slide drifting with a rock rod is a common fishing method, which is suitable for all kinds of waters of fresh water and seawater. Its characteristic is that it can flexibly adjust the position of floating stop according to the water depth and fish situation, and improve the fishing effect. Generally speaking, the following aspects should be paid attention to in the selection of fishing line for rock rod sliding drift:

1. The main line is the line connecting the fishing rod and the fishing float, and the sub-line is the line connecting the fishing float and the fishing hook. The main line is thicker than the sub-line, so as to bear greater tension and prevent disconnection. The sub-line should be thinner than the main line, so that it can be concealed and not easily found by fish. Generally speaking, the model of the main line is between No.2 and No.5, and the model of the sub-line is between No.1 and No.4.

2. The bigger the water area, the faster the water flow and the bigger the fish, so it is necessary to use a larger fishing line in order to have sufficient strength and wear resistance. On the contrary, when fishing in small waters, you can use smaller fishing lines to improve sensitivity and softness.

3. The bigger the fish, the greater the pulling force when biting the hook, so it is necessary to use a larger fishing line in order to have enough bearing capacity and tensile force. On the contrary, when fishing lighter fish, you can use smaller fishing lines to improve the biting rate and control.

drift adjustment method of the slide drift of the rock pole:

1. Select a suitable float

The size, shape and color of the float should be selected according to the water area, current, weather, fish species and other factors. Generally speaking, the bigger the water area, the faster the water flow, so the bigger and heavier the float is, and the opposite is the float in xiao qing. The shape of the float should be suitable for sliding, and generally conical or elliptical floats are selected. The color of the float should be obvious, and red or yellow floats are generally used.

2. Install the fishing line and plumb pendant

Choose the appropriate model for the fishing line, generally between No.1 and No.5, and the main line is thicker than the sub-line. Choose a suitable weight for the lead pendant, generally between .5g and 5g, so as to make the float sink gradually or level off. The lead pendant is divided into two parts, one is a fixed lead pendant fixed on the fishing line, and the other is a movable live pendant.

3. Adjust the float and cotton knot

Put the float on the fishing line and tie a cotton knot under the float to limit the sliding range of the float. Adjust the float to a sinking or flat state, that is, the float only exposes the tip or top. Then adjust the cotton knot to the position one meter above and below the lead drop, so that the float can automatically rise to the predetermined position after the lead falls to the bottom.

4. Throw the fishing rod and take up the line

Throw the fishing rod to the fishing point and gently shake the fishing line, so that the lead falls to the bottom and drives the float to rise. When the float rises to the predetermined position, slowly roll the wheel to tighten the fishing line until the float is exposed for 3 to 4 meshes. In this way, the drift adjustment process of the sliding drift of the rock rod is completed.