Tips for removing glue: use alcohol, use essential oil, use glue remover, use banana water, use a hair dryer.

1. Use alcohol

Alcohol is a very good solvent. After heating and softening the glue surface with a blower, spray it on the surface with alcohol and wait for the alcohol to remove the stubborn glue. After the glue is dissolved, just wipe it off with a towel. If the glue is very thick, you can use a soft cloth dipped in alcohol and wipe it directly on the adhesive part. After it softens, just wipe it clean.

2. Use Fengyoujing

Fengyoujing contains ingredients such as menthol, eucalyptus oil and clove powder, which is equivalent to containing alcohol and is an organic solvent; dip it with a cotton swab to Apply the adhesive part, wait for it to dissolve, and then wipe it off with a towel. If the adhesive has dried and hardened, soak it in alcohol or essential oil for a while and use it with a cleaning shovel.

3. Use glue remover

If you want to get it right in one step, you can just buy a bottle of glue remover. It is not expensive, and it is faster and easier to clean up. It can be used in many places at home. .

4. Use banana water

You can use banana water, a thinner with a relatively high concentration, to remove it, but the surface of the material cannot be painted, otherwise the paint will be brushed off together. Use it first Use a relatively hard object to scrape off the remaining layer of foam or sponge, and then use an oil brush dipped in banana water to wipe the area where the foam glue is stuck.

After about 2 minutes, the foam glue will be diluted, and then use a brush to brush the area where the foam glue is stuck in a circular motion. The glue will fall off, and then clean and dry it.

5. Use a hair dryer

You can use a hair dryer to press the hot air button and blow it towards the area where the foam glue is stained. After blowing for a while, the foam glue will soften and the foam glue will become softer. The adhesive force will weaken and it can be removed easily.