Although you can buy lanterns everywhere nowadays, there is a lot of fun in making your own, here is the lantern handmade method I shared with you.

Materials/Tools:

Colored cardboard, cotton thread, crumpled paper, round gauge, pen, scissors, chopsticks

Method Steps:

1, draw a circle with a diameter of roughly 8CM on the back of the paper, and the circle's The size of the circle to determine the size of the lantern, all depends on your preferences, a *** need 20 round

2, in all the circles painted on the equilateral triangle

3, after painting the extension of the circle cut down to standby, you need to be 20 rounds, 1 piece of rectangular. Paper (very later to do with the spike)

4, the 5 rounds glued together, made a lantern bottom

5, turn the bottom over, respectively, and then glued on the 5 rounds, and now start, in the middle part of the sticky circle, that is, in the picture there is a white double sided tape of the circle, and just glued to the circle is the opposite direction, which consists of the middle part of the lantern.

6. This is what the middle part looks like when it is glued.

7, semi-finished product, the main body of the lantern came out, the following began to do the spike and pole.

8, the reserved rectangular paper, folded, and then cut into spikes spike .

9, began to wear the spike, the lamp mouth is directly below the piece is the bottom of the lamp, from the bottom to upload the past, put your hand into the lantern, and then put the needle back to the outside, cut off the needle.

10, cut down the thread, with the same method to make another lamp spike, use chopsticks to bolt the lamp rope, OK!