Current location - Recipe Complete Network - Diet recipes - How many files should be put in the household refrigerator all year round?
How many files should be put in the household refrigerator all year round?
The gear of thermostat should be adjusted according to the seasonal temperature change. Generally, it can be adjusted to the third gear in spring and autumn, depending on the requirements, whether the freezer can reach below MINUS 18 degrees.

In order to keep food fresh and save electricity, it can be adjusted to 1 or 2 in summer and 4 or 5 in winter.

Because the temperature of the freezer is controlled by the temperature in the freezer, and the temperature control knob is in the freezer.

The temperature in the refrigerator is generally 4 ~ 8 degrees, and the effect is the best.

In summer, the ambient temperature is relatively high, if the thermostat knob is still 3 or above. In order to meet the temperature requirements of the refrigerator, the compressor will work for a long time. Although the temperature of the freezing room is lower than-18 degrees and the temperature of the refrigerating room is very low, it wastes electric energy and shortens the service life of the refrigerator.

Therefore, adjusting the knob of the refrigerator thermostat correctly can not only keep fresh, but also save electricity.

In addition, the refrigerator should be placed in a cool and ventilated place with a certain space around it to facilitate ventilation and heat dissipation.

Matters needing attention in using refrigerator

The thermostat of electronic refrigerator can set the temperature directly on the panel of refrigerator. The freezing room temperature should be-18 degrees, and the refrigerating room temperature should be between 4-8 degrees. Of course, if there is less food in the refrigerator, or there is no special requirement, and the storage time is short, then the higher the temperature of the refrigerator, the more energy will be saved in the case of frozen storage of food.

In addition, the refrigerator should be placed in a cool and ventilated place with a certain space around it to facilitate ventilation and heat dissipation.

At present, the condenser (radiator) of the refrigerator is designed and installed on both sides of the refrigerator to dissipate heat through the refrigerator shell. When the compressor is working, both sides of the refrigerator will generate heat, which is a normal phenomenon.