Tools/materials

Rods, floats

Fish floats tied to the rod as follows:

1, prepare a spherical float, float the tail end of the insertion of the rod, to zhi quasi main line on the set of dao's rubber tube or valve core.

2, inserted about 1.5 centimeters can be; if it is a vertical float, the same way, the bottom of the plug rod into the rubber tube or valve core 1.5 centimeters. Thus the float is installed.

Maintenance of fishing rods:

1, to the rod moisturizing

We should pay attention to the maintenance of fishing. In the dry air season, after fishing with a moderate temperature wet towel to the fishing rod to do "moisturizing", to prevent it from losing elasticity, aging; in the air humidity season, especially after the rain fishing, after enjoying the fun of fishing, but also remember to wet the rod to do a good job of drying treatment.

2, to the rod oil

To the rod to do moisturizing or dry maintenance, if the time is sufficient, we can also give the rod a layer of rod oil. Do not underestimate the role of this layer of rod oil! It can not only prevent the rod paint oxidation, but also can increase the hardness of the rod paint, improve the overall wear resistance of the rod. It will also make your rod shiny and prolong its life.

3, the correct storage of fishing rods

Fishing rods when not in use should be placed in the box cabinet or cloth cover, to avoid extrusion and trampling. Similarly, try to make sure that the place where you store your rods is out of direct sunlight, and that the temperature is between 20 and 30 degrees with moderate humidity.

Float Selection for Fishing Rods:

In the process of fishing, you need to use a lot of tools, including fishing rods, fishing lines, floats and so on. Float is one of the important tools, in many cases have to prepare the float and take the right way to adjust the float, in order to make them in the fish on the hook to send out obvious signals, so that the angler in the right time to lift the rod. The choice of float is a very important one.

When choosing a float, the first thing to pay attention to is the material, often used materials such as reed material, they send out a more accurate signal, and its own price is also more affordable. The shape of the float must also be taken care of, and can be chosen according to the conditions of the water. For example, one of the advantages of long-bodied floats is that they are very good at stabilizing the dress wild, and can be used when fishing the bottom.