Jadeite carving steps are, understand the jadeite carving of the ghostly work

Harvesting: generally large-scale strength of the factory have this process, the use of special tools and materials, in front of the carving process redundant carving marks and "trachoma" grinding flat, for the next grinding and polishing process to lay a good foundation.

The main cutting, guillotine, burin, punching, grinding, carving six major processes. Jade carving methods China has thousands of years of jade culture tradition, created many advanced carving jade tools and carving methods. For example: translucent carving, line carving, relief carving, yin carving, skeletonization and round carving.

The steps of processing jadeite raw stone into finished products are mainly divided into material selection and design, cutting and faceting, polishing and cleaning. Processing of jadeite raw stone, the first selection of material design, the jadeite raw stone for the examination of material, open stone and slicing, and then design, sketching drawings.

Selection of materials is the important beginning of jade carving, the selection of raw material characteristics and processing of the use of the relationship is very close, if the choice is not good, not only a waste of raw materials, processing out of the loss.

It is carved into the surface of the material to form a depression, so that the text or pattern concave in the hook under the lower than the plane of the material to be a kind of carving techniques, relying on skillful and accurate techniques, so that the line has the effect of the beginning and end and the staccato, the depth of the effect. Internal Carving. Internal carving is a jade carving technique that goes deep into the jade material to carve out rounded and relief shapes.

Relief carving is one of the more commonly used methods of jadeite carving, is a semi-stereoscopic carving presentation, carving raised patterns or shapes on the surface of the jade material, to show the three-dimensionality and spatiality of the pattern, usually just compressed thickness, for the length and width of the bearing to maintain the original proportionality of the relationship to the performance of the artistic image.

Who can briefly describe the jadeite carving process is probably how

Harvesting: generally large and powerful factories have this process, the use of special tools and materials, in front of the carving process of excess carving marks and "trachoma" grinding smooth, for the next grinding and polishing process to lay a good foundation.

6 Carving adopts rolling, hooking, polishing and other technological steps to process the jade. Carving techniques in the jadeite jade industry have "far to see the modeling, close to see the jade take up to see the knife work," said the so-called "knife work" is the jadeite carving techniques.

The processing of a fine jade can be roughly divided into four processes: cutting, carving, polishing and decoration.

The selection of materials is an important starting point for jadeite processing. Cutting is also a key link. Some people are keen on gambling and often cut off with a knife. May not only cut off the cui, but also can not make the whole carving art, lose its original value. Purpose orientation and design: making small parts. Consider the purpose and production.

Carving is mainly used rolling, hooking, polishing and other processes, the jadeite processing, rolling refers to the wheel steelyard weights to open the figures, animals, landscape modeling patterns, such as the open face, animal shapes and flowers and plants of the roots and stems and leaves. Hook refers to the outline of the detailed pattern, grinding is to use professional tools, the excess markings and grit sanding flat.

Cutting shape: using thallium to cut out the outline of the drawn jadeite jade piece, the cut shape should retain the maximum volume of the jadeite after processing. Faceting: Carving and outlining the initial embryo, removing the excess part of the shape to fully express the form of the jade. During the carving process, the lines should be smooth and the shape should be beautiful with a sense of wholeness.

Jade carving how to do

1, relief carving is one of the more commonly used method of jade carving, is a semi-stereoscopic carving rendering, carving raised patterns or shapes on the surface of the jade material to show the pattern of three-dimensionality and spatiality, usually just compressed thickness, for the length and width of the bearing to maintain the original proportionality of the relationship to the performance of the artistic image.

2, the main cutting, guillotine, burin, punch, grinding, carving six major processing processes. Jade carving methods China has thousands of years of jade culture tradition, created many advanced carving jade tools and carving methods. For example: translucent carving, line carving, relief carving, yin carving, skeletonization and round carving.

3. Jadeite can be carved by the method of relief carving and concave carving. The spatial structure of the relief can be three-dimensional three-dimensional form, can also have some kind of plane form; can be attached to some kind of carrier, but also relatively independent of the existence. Relief carving and round carving of the difference between its relative flatness and three-dimensionality.

4, first of all, to select the design, the jadeite raw stone for the material, open stone and slice, and then design, outline the pattern. Secondly, we should carry out cutting and faceting, first use the machine to cut out the outline of the jadeite jade pieces, and then carve and outline the initial embryo, remove the excess. Finally, it is polished and cleaned, and after cleaning, it can be waxed or not.

5, now the jadeite jade processing processes and procedures are introduced as follows: the selection of materials: this is an important beginning, jadeite jade material more generally with the crust, is the world's only with the crust of the jade, so it is also known as the gambling stone, but also other jade is not.

The method of jadeite raw stone carving jadeite raw stone how to carve into a finished product

Relief carving. Relief is one of the more commonly used method of jadeite carving, is a semi-stereoscopic carving presentation, carving raised patterns or shapes on the surface of the jade material to show the pattern of three-dimensional and spatial sense, usually just compressed thickness, for the length and width of the azimuth to maintain the original proportionality to the performance of the artistic image.

Selection of materials, selection of materials, according to the material, according to the material. Selection of materials is divided into three steps: examination of the material, opening the stone, slicing. The design of drawing samples according to the quality of raw materials and shape characteristics, to design the theme and faceted shape. This is a very critical step in the jadeite processing technology, directly determines the market value of the finished jadeite.

Carving, piercing and eyeleting. When the completion of a design of the jadeite stone, it is necessary to follow the design of the carving. This step is the most test of the processing master's craft skills.

Generally speaking, emerald from the original stone to a finished product a **** need seven procedures. Procedures are summarized. Selection, cutting, design, rough carving, fine carving flowers, eyeleting, polishing the seven stages. Steps in detail. Selection of material: the so-called selection of material, it is from the emerald market to choose a piece of undeveloped jadeite raw stone.

jadeite pendant how to carve jadeite pendant is how to carve

1, relief is one of the more commonly used method of jadeite carving, is a semi-stereoscopic carving rendering, carved on the surface of the jade material raised patterns or shapes to show the pattern of the three-dimensionality and spatiality, usually just compressed thickness, for the length and width of the bearing to maintain the original proportionality to the performance of the artistic image.

2, do jadeite pendant need steps are: selection, sketching, carving and polishing. Selection. There are many pieces of raw material on the market, but not every piece of raw material is suitable for creation. The jade carver will select the raw material based on its texture, color, and whether it has processing potential, and then to Once the raw material is selected, the jade carver will carefully observe the raw material.

3. Jadeite can be carved by relief and concave carving. The spatial configuration of relief carving can be a three-dimensional, three-dimensional form, or it can also have some kind of flat form; it can be attached to some kind of carrier, or it can exist relatively independently. Relief carving and round carving is different, is its relative flatness and three-dimensionality.

4, draw the design on the drawing board. Making emerald leaves should of course be exquisite, so go ahead and carefully carve them according to the texture of the actual leaves. There are no more two identical leaves in the world, the designer has to design the drawing before carving. Selection of raw materials for emerald leaves.

5, now the jadeite jade processing processes and procedures are introduced as follows: selection of materials: this is an important beginning, jadeite jade material more generally with crust, is the world's only jade with crust, so it is also known as the gambling stone, but also other jade is not.

How to carve jadeite

Relief carving is one of the more commonly used method of jadeite carving, is a semi-stereoscopic carving presentation, carved on the surface of the jade material raised patterns or shapes to show the pattern of the three-dimensional and spatial sense, usually just compressed thickness, for the length and width of the bearing to maintain the original proportionality of the relationship to the performance of the artistic image.

Hand-carved way. Jadeite in our country has long had seven thousand many years of history time, jadeite hand-carved also existed for many years, according to the ancestor's intelligence and the descendants of the independent innovation, now we common hand-carved way: stone carving, relief pattern, skeleton carving, burying line and yin carving and so on. Grinding and polishing and grinding and polishing.

Jadeite can be carved by the method of relief and concave carving. The spatial configuration of relief carving can be a three-dimensional three-dimensional form, or both some kind of plane form; can be attached to some kind of carrier, but also relatively independent of the existence. The difference between relief and round carving lies in its relative flatness and three-dimensionality.