Common cabinets may be made of wood, but today we are talking about a special kind of ceramic tile cabinet, which, as the name implies, is a ceramic cabinet made of some ordinary tiles. So how should this cabinet be operated? What specific steps and methods should be referred to in the process of building cabinets with tiles? I believe that with the help of the following contents, we can have an in-depth understanding of this, and we can also know that the technical test of building cabinets with tiles is relatively high.

First, the method of building cabinets with ceramic tiles

First, prepare all kinds of materials, such as large vitrified bricks, cement, fine sand, steel bars, small red bricks or blocks as the cabinet base, aluminum alloy skin as the cabinet column, and wood inside; Tools include various bricklayers' tools, knives for cutting vitrified bricks, knives for cutting steel bars, glass drills for punching holes in vitrified bricks, etc.

Second, design the size of the cabinet. The height of the cabinet is generally about 780mm, the height of the base is about 150mm, the height of the cabinet body is about 600mm, and the height of the countertop is about 50mm. The width and length of the cabinet can be appropriately designed according to the size of the kitchen.

Third, do a good job in the base of ceramic tile cabinets. The height of the base is about150 mm. You can use small red bricks or cement bricks, that is, build a low seat on the ground, which can be solid, and fix the outline of the cabinet on the base.

Third: cut the tiles according to the set size. Considering the size of all the tiles needed for the bottom surface, elevation and top surface, you can cut them all at once.

Fourthly, the upright post of the installation cabinet door of ceramic tile cabinet can be made of aluminum alloy skin, and a piece of wood is put in the aluminum alloy, so that when the cabinet door is installed, the screws on it are firm and not easy to fall off.

Fifth, to make the bottom of the ceramic tile cabinet, first drill holes in the cut vitrified bricks and drill holes through the sewer pipes. Use a glass drill to drill a hole in the vitrified brick, and the size of the hole shall be subject to passing through the sewer pipe. As long as the vitrified brick is constantly watered when drilling, a hole can be drilled soon.

Sixth, the drilled vitrified bricks are laid on the base of the cabinet through the sewer pipe, and other vitrified bricks are also laid on the base of the cabinet to establish the outline of the bottom of the cabinet.

Seventh: cement on the bottom, that is, cement on these reverse-paved vitrified bricks.

Eighth: spread the vitrified brick at the bottom of the cabinet on the vitrified brick countertop just now, this time facing up. After all the paving, the bottom of the ceramic tile cabinet is ready. Pay attention to the position of the riser when laying tiles.

Ninth: After the bottom surface is paved, stick the upper edge on the outer edge of the bottom surface. These edges are also cut with vitrified bricks. Note that the upper edge of the edge must be in a horizontal plane, and the smaller the error, the better. The basic control is 1-2mm.

Tenth:? Installing a riser is to put the vitrified brick vertically. These vertical vitrified bricks are the front of the cabinet and support the bed board. The two vitrified bricks should stand opposite each other and face outward. Fill cement between two vertical bricks.

Eleven: Drill the holes in the cabinet shelf in advance. The hole of vitrified brick is drilled with glass, and the hole is drilled quickly.

Twelve: Fix the drawer track in advance and calibrate it.

Thirteen: stick the back panel of the cabinet.

Fourteen: the reinforced countertop is very firm after pouring concrete. Chop whatever you want on it (concrete is poured directly on it, and the rammed countertop is very flat. It should be noted that the side of the countertop against the wall is slightly lower than the outer edge, and the water on the countertop will flow inward).

What I recommend above is the methods and precautions that may be involved in the process of building ceramic tile cabinets. Therefore, compared with ordinary elegant wooden cabinets, this kind of ceramic tile cabinet is not only more cost-effective, but also more corrosion-resistant, and its surface gloss and smoothness make it durable. What I recommend to you today is the corresponding technological methods and precautions for building cabinets with tiles, which you can refer to.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~