The fireproof board is made of rock wool and calcium silicate. It has the characteristics of high resistance, not easy to get dirty, washable, colorfast and completely non-combustible, and has the function of fire prevention. At the same time, it can be sound-proof and sound-absorbing, heat-proof, moisture-proof, deformation-free, convenient to maintain and good in use. Can be used as the main wall behind the stove for decoration.

2, stainless steel.

Stainless steel is a new material, which is durable, wear-resistant, clean and fireproof. But the texture is cold, and it is not easy to repair with hard objects, so it is not accepted by people. It is recommended to be used on the wall near the stove to facilitate future cleaning.

3. Tiles.

Ceramic tile is one of the commonly used materials in kitchen, with many colors and easy maintenance. However, it should be noted that the cracks in ceramic tiles are easy to shelter evil people and accommodate evil people. It is suggested that the kitchen wall material should be smooth glazed, which is more convenient to clean.

4. Strengthened glass.

Glass is more suitable for kitchens with small area or good lighting. When the oil fume is attached, it can be gently wiped with detergent. The material is mainly tempered glass, remember to use smooth surface. Glass is suitable for non-bearing walls and has good penetration. In addition, the use of penetrating glass in the kitchen can expand the visual space.

5. paint.

Paint is a more economical choice, although paint is more economical. However, it is difficult to clean the oil stain when it is used, and it needs to be brushed again after a few years.

What are the precautions for kitchen wall decoration?

1, wall waterproofing: At present, there are two main waterproof materials for home improvement: modified asphalt waterproof coating+glass fiber cloth and polyurethane waterproof coating. When waterproof, waterproof coating and glass fiber cloth should be spread on the wall 20-30cm above the ground to prevent leakage at the joint between the wall and the ground.

2. Paint the wall: After the floating dust left by the wall polishing is cleaned, the primer can be applied. Primer can be brushed once, and it must be uniform. After drying (2-4 hours), the next step can be carried out. Generally speaking, the top coat should be brushed twice, and the interval between each time should be more than 2-4 hours (depending on the surface drying time) until it is basically dry. It takes 1-2 days for the paint to completely dry after the second coating. Before the paint is completely dry, pay attention to waterproof, drought-proof and sun protection to prevent problems with the paint film.

3. Construction skills: With the accelerated pace of life, many families often can't wait for the putty to completely dry and the alkalinity to disappear (5-7 days) before painting. At this time, it is even more necessary to brush a layer of alkali-resistant primer to seal the alkalinity of water-resistant putty (which is another defect of water-resistant putty), otherwise the paint is easy to go wrong, especially the colored paint, which will have uneven color like the picture.