Pressure cooker correct deflation method is as follows:

1, first of all, the pressure cooker power plug removed, to confirm that the pressure cooker has no electricity.?

2, then choose a rag and cover the pressure cooker.

3, open the pressure cooker pressure relief valve by hand rotation, let the steam from the pressure relief valve. Covering the rag not only prevents too much steam from causing burns, but also prevents water from spilling out of the pressure cooker.

4, it is expected that after the release, you can remove the rag.

5, in order to ensure that the pressure relief valve to release the gas is complete, you can press the pressure cooker in the middle of the manual decompression button, continue to press for a while, more will be completely release the pressure in the pot.

6, after releasing the pressure, you can rotate the lid, the pressure cooker open, see the pot has been completed food, you can take out to eat.

Pressure cooker precautions

1, each time before adding the lid, carefully check the center of the lid vent is smooth

If you can't see the light on the light, blowing is not smooth, surely clogged, must rule out the clogging before you can add the lid. After the cover, the more scientific method is not to add a pressure limiting valve, to be heated to discharge the cold air inside the pot, to the center of the hole uniformly hot air as a standard, and then add a pressure limiting valve in a timely manner.

2, before adding the pressure limiting valve, the same to check the pressure limiting valve on the vent

Methods available mouth blowing against the big hole, the shunt vent smooth will be bubbling. If it is blocked, use a fine wire to poke through and then use it again. Do not use the pressure cooker to cook beans, rice, ribs and seaweed soup. Because of the high pressure in the pot produces enough foam to block the center hole and the restrictor vent, the disaster will be brewing in it.