Mechanical revolution S 1 what are the steps to install win 10 system? Mechanical Revolution S 1 is a light notebook, 14 inch, pre-installed with Windows 10Home (home version), weighing 1. 18Kg, with a length of 322mm and a width of 222mm. The processor adopts the Intel Core i58 generation series, the CPU frequency is 1.6GHz, the memory capacity is 8GB(8GB× 1)DDR42400MHz, and the hard disk is SSD solid-state hard disk with 256GB. Equipped with IntelGMAHD (integrated in the processor) integrated graphics card, memory capacity * * * Enjoy no memory capacity. Here, Bian Xiao will share with you the graphic steps of the mechanical revolution S 1 reloading win 10 system with a USB flash drive.

I. Preparatory work

1.8g or larger empty USB flash drive.

2. Making uefipe Boot Disk: How to make U disk boot disk with micro pe toolbox (UEFILegacy dual mode).

3.win 10 system download: ghostwin 1064 official installation disk v20 19.07 of computer company.

Second, the mechanical revolution S 1 notebook reloading win 10 steps are as follows.

1. After making the uefi startup disk, copy the downloaded iso image of win 10 system directly to the U disk;

2. Insert the uefi startup USB flash drive into the mechanical revolution S 1 notebook computer. During the startup process, press F 10 to bring up the startup menu, use UEFI to select the startup item of the U disk, and press Enter to start the U disk;

3. After entering pe, double-click the partition assistant on the desktop (lossless), select disk 1, and click Quick Partition;

4. Set the partition number, partition size and partition type for the mechanical revolution S 1 notebook. The system disk of the system is recommended to be labeled above 60G. Since UEFI startup is selected, select GPT as the disk type, and click Start after confirmation;

5. After the partition is completed, open the this pc-Micro PE toolbox, right-click the iso image of win 10 system, and select Load. If there is no loading option, right-click to open Mode-Explorer;

6. Double-click and double-click the installation system. Exe, run the installation tool, select the recovery partition, and the GHOWIMISO image path will be automatically extracted to win 10.gho, and then select the installation location, usually drive C, or judge according to the volume label or total size. After selection, click OK;

7. If this prompt pops up, click Yes to continue execution;

8. In this dialog box, select Restart and Boot Repair after completion, and then click Yes;

9. In this interface, it will take some time to install and deploy win 10 system to drive C;

10. After the operation is completed, the mechanical revolution S 1 notebook will automatically restart after 10 seconds. During the restart, the USB flash drive will be pulled out, and then the win 10 system components will be installed, driven and activated in the interface.

1 1. Finally, start the desktop of win 10 system, and complete the process of mechanical revolution S 1 notebook reloading win 10 system.

The above is the method to reinstall win 10 system in MECHREVO mechanical revolution S 1 notebook. If you need to install win 10 system in the mechanical revolution S 1 notebook, you can install it according to the above steps.