Starting point: Tangshan City
1. Start from the starting point in the east direction, drive along Xishan Road for 370 meters, and turn right into Wenhua Road.
2. Drive along Wenhua Road for 530 meters and turn left into Xinhua East Road.
3. Drive along Xinhua East Road for 4.2km, cross Xinhua Road overpass, head for Guye, and turn right slightly on the ramp.
4. Drive 30 meters along the ramp, cross Xinhua Road overpass about 6 10 meters, and go straight into Tanggu Road.
5. Drive along Tanggu Road for 250 meters and turn left ahead.
6. Drive 10 meter, turn right and enter G205 (old).
7. Drive along G205 (Old) for 6.4km, turn right slightly in the direction of Tangjin Expressway/Jingshen Expressway and get on the ramp.
8. Drive along the ramp 1.7km, turn right ahead and enter Tangjin Expressway.
9. Drive along Tangjin Expressway 12.9 km, head for Shenyang, turn right slightly and get on the ramp.
10. Drive along the ramp 1.2km and go straight into Jingha Expressway.
1 1. Drive along Jingha Expressway for 3.9 kilometers, go west /S23, and turn right slightly on the ramp.
12. Drive along the ramp 1.4km, and go straight into the Qianxi branch line of Jingha Expressway.
13. Drive along the Qianxi branch line of Jingha Expressway for 35. 1km, turn right slightly and enter the Qianxi branch line of Jingha Expressway.
14. Drive along the west branch line of Jingha Expressway for 490 meters and go straight into the west ring road.
15. Drive along the West Ring Road for 390 meters and turn right at the rear.
16. Drive 420 meters and turn left into Xifeng South Road.
17. Drive 2.2km along Xifeng South Road, pass the commercial building on the left for about 50m, and then turn right into Zhongjing East Street.
18. Drive along Zhongjing East Street for 600 meters and reach the finish line (on the left side of the road).
End point: Qianxi County
Question 2: How many kilometers is it from Tangshan to Qianxi? It is 90 kilometers away from Tangshan.
Qian 'an City is located in the center of "Beijing-Tianjin-Tangshan-Qin Cheng" city circle. Qian 'an exit of Beijing-Shenyang Expressway is only 12km away from downtown, Beijing 175km away from Tianjin 160km away from Qinhuangdao in the east, 272km away from Chengde in the north, 90km away from Jingtang Port in the south and 90km away from Tangshan. There are four railways in China: Jingqin, Daqin, Tongtuo and Yingshui Railway. Highway: 2 national highways, Beijing-Shenyang Expressway, National Highway102; There are 3 provincial highways, Sanfu Road, Pingqing Highway and Great Wall Tourist Road.
Question 3: How many kilometers is the driving route from Tangshan to Datong? The whole journey is about 550.3 kilometers.
Starting point: move west.
1. Tangshan driving plan
1) Drive 20 meters northwest from the starting point and turn left into Xifeng South Road.
2) Drive along Xifeng South Road for 2.3km and turn right.
3) Drive 30 meters, turn left slightly and get on the ramp.
2. Drive along the ramp for 540 meters, turn right ahead and enter the west branch line of Jingha Expressway.
3. Drive along the west branch line of Jingha Expressway for 35.4 kilometers, drive in the direction of Tangshan/Beijing /G 1, and turn right slightly on the ramp.
4. Drive along the ramp 1.0km and go straight into Jingha Expressway.
5. Drive along Jingha Expressway 155.4km, cross Dougezhuang Bridge, turn right slightly in the direction of East Fifth Ring Road/Beijing-Tianjin Expressway/Jingtong Expressway, and enter Wu Fang Bridge.
6. Drive along Wu Fang Bridge for 340 meters, cross Wu Fang Bridge for about 500 meters, and go straight into the Fifth Ring Road.
7. Drive along the Fifth Ring Road for 27.9 kilometers, cross Cui Lin Bridge, drive in the direction of North Fourth Ring Road/Badaling /G6, turn right slightly and enter Shangqing Bridge.
8. Drive along Shangqing Bridge for 520 meters, cross Shangqing Bridge for about 150 meters, and go straight into Beijing-Tibet Expressway.
9. Drive along Beijing-Tibet Expressway 134.8km, go to Datong/Xuanhua South, and turn left slightly to enter Beijing-Tibet Expressway.
10. Drive along Beijing-Tibet Expressway for 930m and go straight into Xuanda Expressway.
1 1. Drive along Xuanda Expressway 13 1.6 km, and go straight into Sunyou Expressway.
12. Drive along Sunyou Expressway for 4 1.5km, then turn left slightly and enter Erguang Expressway.
13. Drive along Erguang Expressway for 630m and go straight into Erguang Expressway.
14. Datong driving plan
1) Drive along Erguang Expressway for 8.5km, cross Yu He Bridge, head for Datong/Yuhe West Road, turn left slightly and get on the ramp.
2) Drive along the ramp for 4 10 meters, turn right ahead and enter the Universiade Expressway.
3) Drive 300 meters along the Universiade Expressway and go straight into the Universiade Expressway.
4) Drive along Dayun Expressway100m, and go straight into Yuhe West Road.
5) Drive along Yuhe West Road for 5.9 kilometers, pass the Arc de Triomphe office building on the left for about 200 meters, and then turn left into Yingbin Street.
6) Drive along Yingbin Street 1.2km, pass through Tongcheng Central Business Apartment on the left for about 70m, then turn right slightly and enter Yingbin Street.
7) Drive along Yingbin Street 10 meter and reach the destination (on the right side of the road).
End point: Datong city
Question 4: How many kilometers is it from Qianxi Yuhua Valley to Tangshan? The whole journey is about 88.7 kilometers.
Starting point: Lavender Manor in Yuhua Valley
1. Driving plan of Qianxi County
1) Start due east from the starting point, drive for 40 meters and turn right.
2) Drive for 2.3 kilometers and turn right.
3) Drive 1.7km and turn right ahead.
4) Drive for 280 meters and then turn right.
5) Turn left after driving for 360m.
6) Turn left after driving for 2.8 kilometers.
7) Drive for 490 meters and turn right ahead.
8) Drive 2. 1km, turn left and enter Sanfu Line.
9) Drive along Sanfu Line 1. 1 km, turn right into Sanfu Line and drive in Zunhua direction.
10) Drive 2.0km along Sanfu Line and turn left into Xifeng North Road.
1 1) Drive along Xifeng North Road 1. 1 km, and turn right into Yufeng West Street.
12) Drive along Yufeng West Street for 850 meters and turn left into the West Ring Road.
13) Drive 4.5km along the West Ring Road, turn left slightly in the direction of Tangshan/Shenyang/Beijing /S23, and enter the west branch line of Jingha Expressway.
2. Drive along the west branch line of Jingha Expressway for 270 meters and go straight into the west branch line of Jingha Expressway.
3. Drive along the west branch line of Jingha Expressway for 35.4 kilometers, drive in the direction of Tangshan/Beijing /G 1, and turn right slightly on the ramp.
4. Drive along the ramp 1.0km and go straight into Jingha Expressway.
5. Tangshan driving plan
1) Drive along Jingha Expressway 4. 1 km, and turn right slightly in the direction of Jintang/Tanggang/Tianjin/Jingtang Port.
2) Drive along the ramp 1.3km and go straight into Tangjin Expressway.
3) Drive along Tangjin Expressway 12.7km, get off at Tangshan East/Kaiping District/guye district Exit, and turn right slightly on the ramp.
4) Drive along the ramp for 970 meters and go straight into G205 (Old).
5) Drive along G205 (Old) for 6.7 kilometers and turn left into Tanggu Road.
6) Drive along Tanggu Road for 230m, turn right slightly and drive towards the urban area.
7) Drive for 380 meters and turn right into Xinhua East Road.
8) Drive along Xinhua East Road 1.9 km and go straight into Xinhua East Road.
9) Drive along Xinhua East Road 1 20m, exit at1,turn right slightly to Dacheng Road and enter Long Ze South Road.
10) Drive along the side road of Long Ze South Road for 490 meters and go straight into Long Ze South Road.
1 1) Drive along Long Ze South Road 1.3km, turn left slightly and enter Beixin East Road.
12) Drive along Beixin East Road for 540 meters and turn left into Wenhua Road.
13) Drive along Wenhua Road for 420 meters and turn right into Xishan Road.
14) Drive along Xishan Road for 370 meters and reach the destination (on the right side of the road).
End point: Tangshan city
Question 5: How many kilometers is Jingtang Port from Qianxi County, Tangshan City? Driving route: The whole journey is about161.5km..
Starting point: Jingtang Port
1. Tangshan driving plan
1) Start due east from the starting point, drive for 240 meters and turn right.
2) Turn right after driving for 480m.
3) Drive 350 meters and turn left.
4) Drive 180m and turn right.
5) Drive 1. 1 km and turn right into Haibin Road.
6) Drive along Binhai Road 6. 1km and turn right.
7) Drive for 2.0km and turn left into Haigang Road.
8) Drive along Gangda Road 1.8km, and go straight into Tanggang Line.
9) Drive along Tanggang Line13.7km and turn right on the ramp.
2. Drive along the ramp for 540 meters and go straight into Tanggang Expressway.
3. Drive along Tanggang Expressway for 65.2km, heading for Tangjin Expressway/Jingha Expressway, turn right slightly and get on the ramp.
4. Drive along the ramp 1.5km and go straight into Tangjin Expressway.
5. Drive along Tangjin Expressway for 22.9 kilometers, head for Shenyang, turn right slightly and get on the ramp.
6. Drive along the ramp 1.3km and go straight into Jingha Expressway.
7. Drive 4.0km along Jingha Expressway, drive west /S23, and turn right slightly on the ramp.
8. Drive along the ramp 1. 1 km, and go straight into the Qianxi branch line of Jingha Expressway.
9. Drive 35.2km along the west branch line of Jingha Expressway, get off at the exit of Xihuan Road/Sanfu Highway/Qianxicheng District, and turn right slightly on the ramp.
10. Drive along the ramp for 230m, and then go straight.
1 1. Driving plan of Qianxi County
1) Drive 70 meters and turn left.
2) Drive 100m and go straight into Xifeng South Road.
3) Drive along Xifeng South Road for 2.9 kilometers and turn right into Zhongjing East Street.
4) Drive along Zhongjing East Street for 600 meters and reach the destination (on the left side of the road).
End point: Qianxi County
Question 6: How many kilometers is the driving route from West Fourth Ring Road to Tangshan? The whole journey is about 236.3 kilometers.
Starting point: West Fourth Ring North Road
1. Beijing driving plan
1) Depart from the starting point to the north, drive 5.0km along the Northwest Fourth Ring Road, cross the Hayes Bridge and go straight into the Northwest Fourth Ring Road.
2) Drive 5.6km along the Northwest Fourth Ring Road, cross the Baofusi Bridge and go straight into the North Fourth Ring Road.
3) Drive along the North Fourth Ring Road for 6.0km, cross Beichen Bridge, turn right slightly and enter the East of the North Fourth Ring Road.
4) Drive 5.7 kilometers along the Northeast Fourth Ring Road and go straight into the North East Fourth Ring Road.
5) Drive 5.4 kilometers along the Northeast Fourth Ring Road and go straight into the Middle East Fourth Ring Road.
6) Drive along the East Fourth Ring Road for 3.7 kilometers, cross Baiziwan Bridge for about 1.9 kilometers, and go straight into the south of the East Fourth Ring Road.
7) Drive along the Southeast Fourth Ring Road for 980m, cross the highway bridge, head for the East Fifth Ring Road/Shenyang /G 1/ Jingha Expressway, turn right slightly and enter the Sifang Bridge.
2. Drive along Sifang Bridge for 690 meters. Cross Sifang Bridge for about 640 meters and go straight into Jingha Expressway.
3. Follow Jingha Expressway 160.2km, go west /S23, and turn right slightly on the ramp.
4. Drive along the ramp 1.4km, and go straight into the Qianxi branch line of Jingha Expressway.
5. Drive 35. 1km along the Qianxi branch line of Jingha Expressway, get off at the exit of Xihuan Road/Sanfu Highway/Qianxi District, and turn right slightly on the ramp.
6. Drive along the ramp for 250 meters and go straight.
7. Tangshan driving plan
1) Drive 50 meters and turn left.
2) Drive 90 meters and go straight into Xifeng South Road.
3) Drive 2.8km along Xifeng South Road, pass the commercial building on the left for about 50m, and then turn right into Zhongjing East Street.
4) Drive along Zhongjing East Street for 600 meters and reach the destination (on the left side of the road).
End point: Qianxi County
Question 7: How many kilometers is the driving route from Zuogezhuang to Tangshan? The whole journey is about 265.438+0 km.
Starting point: Zuogezhuang Town Committee, Wen 'an County
1. Langfang driving plan
1) Start from the starting point to the west, drive 140m, and turn left.
2) Drive 950 meters and turn right.
3) Drive 1.5km, turn left and enter Chuangye Road.
4) Drive along Chuangye Road for 920 meters and turn right.
5) Drive 3. 1km and go straight.
6) Drive 1.3km and go straight on the ramp.
7) Drive along the ramp for 630m and go straight into Cang Lang Expressway.
8) Drive along Cang Lang Expressway 10.5km, turn right slightly on the ramp and drive in the direction of Baoding/Tianjin/Beijing /G 18.
2. Drive along the ramp1.2km and go straight into Wurong Expressway.
3. Drive along Wurong Expressway for 30.8km, drive in the direction of Xiang Jing/Ji/Dong/Wangqingtuo, turn right slightly and enter Wangqingtuo Interchange.
4. Drive along Wangqingtuo Interchange 1.9 km and go straight into Beijing-Shanghai Expressway.
5. Drive along the Beijing-Shanghai Expressway for 9.6km, drive in the direction of Binhai New Area/Tangshan /G250 1/G3, turn right slightly and enter Shigezhuang Interchange.
6. Drive along Shigezhuang Interchange 1.8km and go straight into Binbao Expressway.
7. Drive along Binbao Expressway for 79.6 kilometers, turn right slightly and get on the ramp.
8. Drive along the ramp for 2.2km and go straight into Shen Chang Expressway.
9. Drive 30.3km along Shen Chang Expressway to Qinhuangdao/Jingha Expressway/Tangshan South/Jingtang Port, and turn right slightly to enter Tangjin Expressway.
10. Drive along Tangjin Expressway for 42.9 kilometers, head for Shenyang, turn right slightly and get on the ramp.
1 1. Follow the ramp 1.2km and go straight into Jingha Expressway.
12. Drive along Jingha Expressway for 3.9 kilometers, go west /S23, and turn right slightly on the ramp.
13. Drive along the ramp 1.4km, and go straight into the Qianxi branch line of Jingha Expressway.
14. Drive along the Qianxi branch line of Jingha Expressway for 35. 1km, turn right slightly and enter the Qianxi branch line of Jingha Expressway.
15. Drive along the west branch line of Jingha Expressway for 490 meters and go straight into the west ring road.
16. Tangshan driving plan
1) Go along the West Ring Road160m, and turn right into Yue Long Street.
2) Drive along Yue Long Street for 3 10 meters and turn left into Xifeng South Road.
3) Drive 2.5km along Xifeng South Road and turn right into Zhongjing East Street.
4) Drive along Zhongjing East Street for 600 meters and reach the destination (on the left side of the road).
End point: Qianxi County
Question 8: How many kilometers is it from Beijing to move westward? How long does it take to drive? The driving route to Beijing is 239 km c, about 3 hours and 39 minutes. The suggested route is Qianxi County, Tangshan City, Hebei Province 1. From Zhongjing East Street to the west, it is 0.6 square kilometers to Dongfang Pedestrian Street. Turn right at Xifeng Middle Road and drive for 2.3km 3. Continue along Xifeng North Road 1. 1km 4. Turn left at Cuihu Street 1.2km 5. Turn left slightly on provincial highway 363 for 9.6km 6. Turn left slightly on Provincial Highway 356 2 1.3km 7. Turn left at Donghuan South Road. 49 1 m 8. Continue along Jianxing Road for 0.6 km 9. Turn left slightly from Jianxing Road. Enter Jianshe South Road and drive 4.7km 10. Turn right slightly at 1 12 national highway and drive for 24.9km 1 1. Turn right and follow Tang Cheng Expressway17.7km 12. Continue to drive along the toll section of the West Outer Ring Expressway 1.2km 65438. Beijing exit, 0.6 km 14 to the toll section of Beijing-Shenyang Expressway. At the intersection, continue to turn left in the direction of Beijing-Shenyang Expressway and take the toll section of Beijing-Shenyang Expressway 140 km 15. Xia Dong 4th Ring Road/Sifang Bridge Exit, 346m 16 to Dongsihuan South Road. Dongsihuan South Road Exit 1.5km 17. Continue along the East Fourth Ring Road for 2.2km 18. Guo Mao Bridge/East Third Ring Road/Jingtong Expressway/East Fifth Ring Road/Tongzhou Exit. Shangjingtong Expressway 126 meters 19. At the intersection, continue to turn left in the direction of Jingtong Expressway. Take Jingtong Expressway 1.7km 20. Continue along Jianguo Road 1.3km 2 1 Continue along Jianguomenwai Street for 2.2 kilometers. Continue along Jianguomen Inner Street 1.6km 23. Continue on East Chang 'an Street 1.6km 24. Continue to walk along West Chang 'an Avenue.
Question 9: How many kilometers does Tangshan go west to Beijing New Expressway? Driving route: the whole journey is about 2 12. 1 km.
Starting point: Qianxi County
1. Driving plan of Qianxi County
1) Start from the starting point to the west, drive along Zhongjing East Street for 570 meters, cross the Saintigny water purifier on the left, and turn left into Xifeng South Road.
2) Drive along Xifeng South Road for 2.9 kilometers and turn right.
3) Drive 30 meters, turn left slightly and get on the ramp.
2. Drive along the ramp for 540 meters, turn right ahead and enter the west branch line of Jingha Expressway.
3. Drive along the west branch line of Jingha Expressway for 35.4 kilometers, drive in the direction of Tangshan/Beijing /G 1, and turn right slightly on the ramp.
4. Drive along the ramp 1.0km and go straight into Jingha Expressway.
5. Drive along Jingha Expressway 16 1.0km, cross Sifang Bridge and go straight into Jingha Expressway.
6. Drive along Jingha Expressway for 470 meters, turn right slightly and enter Shuanglong Road.
7. Beijing City Driving Plan
1) Drive along Shuanglong Road for 360m and go straight into Songyu South Road.
2) Drive along Songyu South Road 1.4km, cross Huawei Bridge and go straight into Huawei South Road.
3) Drive along Huawei South Road 1.4km, turn right at Guangqumen and enter Nanbinhe Road.
4) Drive along Guangqumen Nanbinhe Road 1 10 meters, turn left slightly and enter the Second Ring Road.
5) Drive along the Second Ring Road for 3.2km, cross Guangqumen Bridge, get off at Chongwenmen/Beijing Railway Station/Beijing Ming City Wall Ruins Park, turn right slightly and enter Dongbianmen Bridge.
6) Drive along Dongbianmen Bridge for 430m, cross Dongbianmen Bridge for about 260m, and go straight into Chongwenmen East Street.
7) Drive along Chongwenmen East Street for 990 meters. After passing Chongwenmen on the right for about 320 meters, turn right slightly and enter Chongwenmen West Street.
8) Drive along Chongwenmen West Street for 560m, turn right slightly and enter Qianmen East Street.
9) Drive along Qianmen East Street for 280 meters, turn left slightly and enter Qianmen East Street.
10) Drive along Qianmen East Street 150 meters and turn right into Zhengyi Road.
1 1) Drive 200 meters along Zhengyi Road, pass the former site of Zheng Jin Bank on the right, and you can reach your destination (on the right side of the road).
End point: Beijing
Question 10: How many kilometers is the distance from Hechi, Guangxi to Qianxi County, Tangshan City? Driving route: the whole journey is about 2420.8 kilometers.
Starting point: Hechi City
1. Hechi driving plan
1) Go north from the starting point, drive for 280m, and turn right into Jincheng Middle Road.
2) Drive along Jincheng Middle Road 2. 1km and turn left into G323.
3) Drive along G323 for 420 meters and go straight into G323.
4) Drive along G323 for 2. 1 km, and go straight into Lanhai Expressway.
2. Drive along the Blue Ocean Expressway for 380 meters and go straight into Shantou-Kunming Expressway.
3. Drive along Shantou-Kunming Expressway 173.8km, cross the Luo Qingjiang Bridge, head for Guilin/Hengyang, and turn left slightly on the ramp.
4. Drive along the ramp for 830 meters and go straight into Quannan Expressway.
5. Drive along Quannan Expressway 108.7km, head for Lingchuan/Lingui New District/Airport/Longsheng, turn right slightly and enter Guilin Ring Expressway.
6. Drive along Guilin Ring Expressway for 920 meters and go straight into Guilin Ring Expressway.
7. Drive along Guilin Ring Expressway for 26.8km, drive in the direction of Lingui New District/Longsheng/Xing 'an/Quanzhou, and turn right slightly to enter Quannan Expressway.
8. Drive along Quannan Expressway for 560m, cross Yanggouhe Bridge and turn left to enter Quannan Expressway.
9. Drive along Quannan Expressway for 322.8km, drive towards Beijing/Changsha, turn right slightly and get on the ramp.
10. Drive along the ramp for 950 meters and go straight into Beijing-Hong Kong-Macao Expressway.
1 1. Drive along Beijing-Hong Kong-Macao Expressway for 282.8km, exit Yueyang/Suizhou/Jingzhou /S6 1, turn right slightly and get on the ramp.
12. Follow the ramp 1.2km and go straight.
13. Drive for 2.4 kilometers and go straight.
14. Drive 10 meter and go straight into Yueyang Avenue.
15. Drive along Yueyang Avenue for 5.9 kilometers and turn right slightly in the direction of S6 1/ Jianli/Tianmen/Suizhou.
16. Follow the ramp 1.4km, turn left and enter Yuelin Expressway.
17. Drive along Yuelin Expressway for 26.0km and go straight into Guangxu Expressway.
18. Drive along Guangxu Expressway 123.3km and go straight into Suiyue Expressway.
19. Drive along Suiyue Expressway for 4. 1 km and go straight into Guangxu Expressway.
20. Drive along Guangxu Expressway149.3km, and go straight into Suiyue Expressway.
2 1. Follow Suiyue Expressway 18.5km, turn left slightly and enter Guangxu Expressway.
22. Drive along Guangxu Expressway for 38.2 kilometers and go straight into the traffic expressway.
23. Drive along the traffic expressway 148. 1km, and turn right slightly on the ramp heading for Pingdingshan/Luoyang/Xuchang/Nanyang.
24. Drive along the ramp for 990 meters and go straight into Luoning Expressway.
25. Drive along Luoning Expressway for 2.9 kilometers, drive in the direction of Xuchang /S83/ Nanyang, turn right slightly and get on the ramp.
26. Drive along the ramp for 970 meters and go straight into Lannan Expressway.
27. Drive along Lannan Expressway for 47.4km, drive in the direction of Yongcheng/Lankao /S32/S83, and turn right slightly to enter Yongdeng Expressway.
28. Drive along Yongdeng Expressway for 800 meters and go straight into Yongdeng Expressway.
29. Drive along Yongdeng Expressway for 26.3km, drive in the direction of Yanling /S83/ Lankao, and turn right slightly to enter Lannan Expressway.
30. Drive along Lannan Expressway for 79. 1km, then turn right slightly, and take the ramp to Kaifeng /G45/ Puyang.
3 1. Follow the ramp 1.2km and go straight into Daguang Expressway.
32. Drive along Daguang Expressway for 420. 1km, and turn right slightly on the ramp heading for Cangzhou/Huanghua /G 18 1 1.
33. Drive along the ramp for 690 meters and go straight into Huangshi Expressway.
34. Drive along Huangshi Expressway 102.7km, and turn right slightly in the direction of Beijing/Jinan /G2/G3 on the ramp.
35. Drive along the ramp 1.2km and go straight into Beijing-Shanghai Expressway.
36. Drive 50.7 kilometers along the Beijing-Shanghai Expressway, cross the overpass and head for Tianjin ... >>