1, coarse-grained core cover, coarse-grained core, gasket and coarse-grained core bottom plate;

2. Fine filter cavity, water pipe, transparent plastic pipe and fine filter element cover;

3. Three-bend cock and stainless steel wire filter screen;

4. Heater and temperature and pressure controller;

5. Manually control the ejector pin and solenoid valve.

Working principle of oil-water separator:

1. Oily sewage is sent to the oil-water separator by the sewage pump, and after passing through the diffusion nozzle, large oil droplets float on the top of the left oil collection chamber;

2. Sewage containing small oil droplets enters the corrugated plate coalescer at the lower part, where the oil droplets are polymerized into larger oil droplets and sent to the right oil collection chamber;

3. The sewage containing smaller oil droplets passes through a fine filter to remove impurities in the water, and then enters a fiber polymerizer in turn, so that the small oil droplets are polymerized into larger oil droplets and separated from water.

4. The separated clean water is discharged through the discharge port, the dirty oil in the left and right oil collection chambers is automatically discharged through the electromagnetic valve, and the dirty oil separated in the fiber polymerization kettle is discharged through the manual valve.

Extended data:

function

1, used for air compressor, used to separate impurities such as condensed water and oil from compressed air, so that the compressed air can be preliminarily purified. Generally, the working pressure is 0. 1Mpa- 2.5Mpa.

2. For ships, the bilge water containing all kinds of fuel oil, extremely high density residual oil and emulsified mixture of iron oxide and surfactant can be effectively treated by ship oil-water separator.

Baidu encyclopedia-oil-water separator