First, the method of pasting ceramic tiles on the wall of second-hand houses in Changsha 1. Check the verticality and flatness of the wall before pasting: if the deviation exceeds 20mm, it should be leveled twice.
2. Tiles with clay walls: They must be soaked in water for 2 hours before use, and then dried for later use.
3. Hanging line: at the top corner of the wall, make two standard points, then hang them on a vertical line, and then use a horizontal line to rise vertically.
4. The first row of cross braces: mushy, and the first row of cross braces is made according to the rules. Bricks to be used are selected from this row of cross braces and placed horizontally with about 5mm muddy pure cement slurry with a flatness of 2 meters. Except the process specification, it should not exceed 1.5? Mm error, horizontal seam and straight seam shall not exceed 1.5? Hmm.
5. Corner-cutting bricks: the whole wall is arranged from left to right, and the corner-cutting bricks should not be less than 25% of the total width; Need to cut off the wall with holes and paste them evenly from the edge of the holes; The hole should be cut with extrusion equipment, and the compasses must be square to make the surface complete and smooth.
6. Maintenance and bonding: the curing time is 72 hours. Dilute the joints with the materials specified in the process, and then compact them with joints with equivalent joint width. After grinding, clean the surface.
Second, what kind of glue is used to paste tiles on the wall of second-hand houses in Changsha? 1, an adhesive for deacidification of ceramic tiles. The curing effect of this kind of ceramic tiles is very fast, so the transparency is very strong. When the bonded tiles are cured, acetic acid will be released, resulting in a strong fragrance. Acetic acid is corrosive to inorganic materials such as metal and coated glass.
2. Alcohol-free TC ceramic tile adhesive with low curing shrinkage is unlikely to be soaked in water, and most substrates are non-corrosive. Adhesion to fluorocarbon profiles, plastic steel and marble is relatively poor. If working at high temperature, the reaction will be faster, and small molecules will not produce bubbles in time, which will affect the quality of the structure.
The above introduces the related contents of the second-hand house wall tiling in Changsha, and also introduces in detail what kind of glue is good for tiling.
Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~