After the completion of home renovation, each space, renovation links need to acceptance, acceptance is to ensure the quality of the renovation, to avoid leaving the renovation of hidden dangers, leading to problems in the future to move in, these are the places where you especially need to pay attention to, today we will introduce you to the kitchen to see what part of the completion of the acceptance of the kitchen renovation to see the acceptance criteria.

1, kitchen ventilation

Ventilation is the kitchen must consider ventilation, usually, kitchen ventilation window area should generally be used for the area of 1/10, such as the kitchen indoor area of 10 square meters, then open the window area should be 1 square meter. In addition, the kitchen exhaust hole diameter of 15 centimeters, in the acceptance must be carefully measured, because less than is unable to install the hood later.

2, cabinet acceptance

Installation of cabinet door panels, to ensure that they correspond to each other, the same height, all the width of the center seam should also be consistent. The pulls should be above the same level. The countertop of the cabinet should be kept smooth, shiny, and without obvious scratches. The connections for the top and bottom should be kept smooth. The pull-out drawer of the cabinet is about 20mm and can be closed automatically, which can indicate a stronger load-bearing capacity.

3, kitchen sink acceptance

First of all, open the cold water faucet in the kitchen sink, the double sink in the water to plug up, filled with a sink of water, and then turned on the water heater, test the hot water out of the situation is smooth. At the same time check the working condition of the water heater and so on, these seem to be associated with the acceptance of the equipment, in fact, is closely related to the kitchen gas pipeline, downpipe. The main point of the kitchen acceptance is to highlight the functionality.

4, kitchen wall acceptance

Now a lot of kitchen walls are tiled walls, but more likely to be the problem is that the brick body has a color difference, paving gaps are too large or uneven, corner tiles loose off, uneven and cracked, as well as tiles and walls with voids between them.

5, kitchen ceiling acceptance

In order to facilitate scrubbing, the kitchen ceiling is best to hang the whole ceiling, acceptance is mainly to observe whether there are uneven seams, poor flatness, ceiling arching, uneven corners, displacement and deformation.

On the completion of the kitchen to accept which, kitchen renovation acceptance criteria for you to introduce this hope that everyone decorating help, if you want to know more about home furnishing knowledge please pay attention to home furnishing network.

Original address:/news_14716/