"Waste Electrical and Electronic Products Recycling and Disposal Regulations" on January 1, formally implemented
: "Chinese People's **** and the State Food Safety Law", "food containers, packaging materials with additives, the use of hygiene standards" (GB9685-2008) in June this year after the official implementation of the "plastic composite film for packaging, bags, dry composite, extrusion compound" (GB / Tl0004-2008), "food containers, packaging materials with melamine a formaldehyde molding products health standards" (GB9690-2009) were implemented in August, September; mandatory national standard "plastic disposable food and beverage utensils General Technical Requirements" (GBl8006.1-2009) and other three standards will also be implemented in the next two years, dangerous to consumer health! Packaging, over-packaging will be stopped by the standard door.
2008/12/02 bottles and other food plastic products without QS certification will be banned
2008/12/02 Hangzhou Inspection and Quarantine Bureau of the enterprise inspection of plastic products to make new provisions
2008/12/02 Shenzhen proposed to ban the issuance of free plastic shopping bags through legislation
2008/12/02 Hong Kong constitutional Plastic shopping bags: each plastic shopping bag levy 50 cents environmental fee
2008/12/02 State Council to limit the production and marketing of plastic shopping bags will be paid for the use of the system
2008/12/02 Plastic shopping bags national standard in March to complete the development of the
2008/12/02 Plastic restrictions on plastic bags spawned the national standard at the end of the month issued a draft for comment
2008/12/02 Plastic products industry urgently needs to be repositioned under the head of the baton
2008/12/02 Packaging composite film, bags have the first general category of national standards
2008/12/02 Customs for Yiwu plastic products export procedures tailored to the new policy
2008/12/02 Plastic futures contracts and the relevant implementation rules
2008/12/02 Plastic futures contracts and related implementation rules. Amendments announced
2008/12/02 Processing trade policy for major adjustments to export costs or a sharp rise of 30%
2008/12/02 Xi'an introduced health requirements for the ban on plastic bags and bowls
2008/12/02 Germany: the EU REACH regulations are not conducive to the recycling of discarded plastic products
2008/12
2008/12/02 San Francisco: Proposed legislation to ban ordinary plastic bags
2008/12/02 Establishment of the "Shenzhen No Plastic Bags Day"
2008/12/02 United Kingdom on the recycling of plastic packaging waste regulations must be met
2008/12/02 U.S. to extend imports of PET tariff-free policy in three Asian countries
2008/12/02 2007 polypropylene PP tariff adjustments
2008/12/02 EU and will pass the technical barriers to environmental protection trade REACH regulations
2008/12/02 The development of foreign recycled plastics industry status quo and its use of regulations
2008/12/02 The development of foreign recycled plastics industry status quo and its use of regulations
2008
2008/12/02 Shaanxi Province, 39 kinds of food plastic products to implement market access system
2008/12/02 China's plastic doors and windows profiles of the new standards will soon be implemented
2008/12/02 The European Commission through the increase in the proportion of recycled plastic waste bill
2008/12/02 Plastic recycling will have a national policy
2008/10/08 Chlor-Alkali Association: Removal of protection affects new PVC production capacity
-Ministry of Finance Circular to Strengthen the VAT Supervision of Renewable Resources Recycling and Utilization Enterprises 2010-12-27
-Announcement on the Publication of the "Guidelines for Qualification and Licensing of Enterprises Disposing of Waste Electrical and Electronic Equipment 2010-12-22
-Motor Vehicle Repair Industry, End-of-life Motor Vehicle Recycling Industry Security Management Measures 2010-12-13
-Application for 2011 imported waste hardware and electrical appliances, such as designated processing and utilization of the list of public announcement 2010-11-30
-MEP: Waste Electronics Processing Enterprises to build a data and information management system and reporting information guidelines 2010-11-19
-MEP Announcement of Guidelines for Subsidy Review of WEEE Treatment Enterprises 2010-11-19
-MEP announced guidelines for the preparation of development plan for the treatment of waste electrical and electronic products 2010-11-18
-Implementation of WEEE Recycling Regulations 2010-10-12
-MEP's announcement on the waste of PET and waste of ship and waste of CD-ROMs 2010-10-9
-Gansu Province, the comprehensive utilization of renewable resources recycling measures 2010-9-25
-Development and Reform Commission issued the "Waste Electrical and Electronic Products Disposal Catalog (the first batch)" 2010-9-15
-Development and Reform Commission on the issuance of the "Disposal of Waste Electrical and Electronic Products Catalog (the first batch)" to answer reporters' questions 2010-9-15
-The National General Administration of Quality Supervision, Inspection and Quarantine (AQSIQ): announced the import of solid wastes as raw materials, foreign suppliers of effective registration qualifications 2010-8-25
-AQSIQ announced the first batch of 2010 cancellation, revocation of imported waste materials, the list of domestic consignee registration qualifications 2010-8-25
-On the issuance of the "Gansu Province, renewable energy value-added tax prior to the collection of the audit and approval of the implementation of the Measures 2010-8-19
-Detailed Changes in Subsequent Policies Related to the 2009 Value-added Tax Reform 2010-8-13
-Notice of the Ministry of Environmental Protection on Approving 2011 Enterprises Designated for Processing and Utilization of Waste Electrical Machines 2010-8-10
-Technical Specification for Enterprises of Scrap Automobile Recycling and Disassembling 2010-8-2
-Ministry of Commerce Notice of the Ministry of Finance on the Pilot Demonstration Project for Upgrading and Transformation of Scrap Vehicle Recycling and Disassembling Enterprises 2010-8-2
-China's Comprehensive Utilization of Resources Technical Policy Outline 2010-7-28
-The person-in-charge of the Finance Department of the Ministry of Commerce replied to a reporter's question on the cancellation of export tax rebates for some commodities 2010-6-24
-The Ministry of Finance and the State Administration of Taxation on the Cancellation of export tax rebates on some commodities 2010-6-23
-Ministry of Commerce on further promoting the development of renewable resources recycling industry 2010-6-9
-The State Council Legislative Affairs Office, the Ministry of Environmental Protection, the person in charge of the Waste Electrical and Electronic Equipment Recycling Treatment Regulations on the reporter's question 2010-6-7
-The National Development and Reform Commission, the Ministry of Finance, the Ministry of Finance, the Ministry of Finance National Development and Reform Commission and Ministry of Finance plan to build 30 demonstration bases of "urban minerals" in 5 years 2010-5-27
-NDRC: Promoting comprehensive utilization of bulk solid waste and promoting the development of resource recycling industry 2010-5-19
-Notice on the Construction of Demonstration Bases for Urban Minerals 2010-5-13
-National Development and Reform Commission (NDRC) officials answered reporters' questions on increasing investment and financing policies to promote the development of circular economy 2010-5-10
-Notice on the issuance of Technical Guidelines for Domestic Waste Disposal 2010-5-4
-Four departments issued investment and financing policies and measures to support the development of circular economy 2010-5-10 4-29
-General Administration of Customs Announcement No. 21 of 2010 on the implementation of the classification of key solid waste shipment management 2010-4-1
-[Exclusive] MIIT: vigorously promote the development of resource recycling industry 2010-3-29
-Zhongshan City, China on the promotion of renewable resources industry and the healthy development of the views 2010-3-19
-State General Administration of Inspection and Quarantine: suspended 31 enterprises imported solid wastes foreign supplier registration 2010-3-18
-General Administration of Customs Announcement No. 16 of 2010 on the release of some of the classification of imported solid wastes standardize the declaration of the relevant provisions of the 2010-3-12
-The circulation of second-hand equipment, "the general provisions of the technical specifications" formally implemented from today onwards 2010-3-2
-Ministry of Environmental Protection: New Standards on Medical Waste, Waste Lead Storage Batteries, etc. to be Enforced on March 1 2010-3-1
-National Environmental Protection Standards for Lead Smelting Industry to be Enforced on February 1, 2010 2010 2010-2-3
-Ministry of Industry and Information Technology: Promoting the Circular Economy to Promote the Renewable Resource Industry 2010-14
-Ministry of Industry and Information Technology: Promoting the Circular Economy to Promote the Renewable Resource Industry 2010-1-1 1-14
-Announcement on the Change of Some Customs Commodity Numbers and Customs Commodity Names in the Imported Waste Management Catalog 2010-1-12
-Announcement on the Publication of Technical Specification for Pollution Control of Disposal of Waste Electrical and Electronic Equipment 2010-1-12
1 GBn84-80 Hygienic Standards for Polyethylene Molding Products
2 GBn85-80 Hygienic Standard for Polypropylene Molding Products
3 GBn86-80 Hygienic Standard for Polystyrene Molding Products
4 GBn87-80 Hygienic Standard for Melamine Molding Products
5 GB3806-83 Polyvinyl chloride Plastic Sandal
6 GB3807-83 Polyvinyl chloride Microporous Plastic Slipper
7 GB3830-83 Soft polyvinyl chloride calendered film (sheet)
8 GB4085-83 Semi-rigid polyvinyl chloride block plastic flooring
9 GB4217-84 Nominal outside diameter and nominal pressure of thermoplastic pipes
10 GB4219-84 Rigid polyvinyl chloride pipes for chemical industry
11 GB4220-84 Rigid polyvinyl chloride pipe fittings for chemical industry
12 GB4454-84 Rigid polyvinyl chloride sheet
13 GB4455-84 Polyethylene blown film for agricultural use
14 GB4456-84 Polyethylene blown film for packaging use
15 GB5664-85 High density polyethylene monofilament
16 GB5736-85 Calcium-plastic corrugated boxes for pesticides
17 GB5737-85 Plastic food crates
18 GB5738-85 Plastic beverage crates
19 GB5739-85 Plastic beer crates
20 GB5836-86 Rigid PVC pipes and fittings for architectural drainage
21 GB5836-86 Rigid PVC pipes and fittings for architectural drainage
2 GB5837-86 Rigid PVC pipe and fittings for architectural drainage
3
21 GB6668-86 Polyvinyl chloride knitted fabric-based foam artificial leather
22 ZBY28001-85 Rigid PVC stair handrails
23 ZBY28002-85 Phenolic adhesive cloth tiles
24 ZBY28003-85 Calendered PVC rigid sheets for food packaging
25 SG8-67 Polyvinyl chloride plastic soles
26 SG22-73 Polyvinyl chloride plastic for cable industry
27 SG78-74 Hard polyvinyl chloride pipes
28 SG79-74 Soft polyvinyl chloride pipes
29 SG80-75 Polyvinyl chloride pipes
30 SG83-75 Polyvinyl chloride Artificial Leather
31 HG2-821-75 Pearlescent Plexiglass Sheet
32 SG124-77 Pearlescent Plexiglass Buttons
33 SG125-77 Plastic Buttons
34 B1256-77 6020 Polyester Film
35 SG187-80 Teflon Film
36 SG188-74 Soft PVC Tubing
29 SG80-75 PVC Tubing
30 SG83-75 Polyvinyl Chloride Tubing
36 SG188-80 Polytetrafluoroethylene rods37 SG189-80 Polytetrafluoroethylene tubes
38 SG190-80 Polytetrafluoroethylene sheets
39 SG212-80 Rigid polyvinyl chloride foam sheets
40 SG213-80 Polypropylene textile bags
41 SG214-80 Concrete railroad ties
41 80 Polyvinyl chloride gaskets for concrete sleepers
42 LY218-80 Plastic laminating sheets
43 SG224-81 High-pressure polyethylene heavy-duty packaging bags (film)
44 SG232-81 Polystyrene foam plastic sheets
45 SG233-81 Polystyrene foam packaging materials
46 SG234-81 Plastic Packing Strap
47 SG243-81 Black Low Density Polyethylene Cable Sheathing Material
48 SG244-81 Polyvinyl Chloride Plastic Foam Sandals
49 SG245-81 Soft Polyvinyl Chloride Extruded Sheet
50 SG246-81 Polypropylene Tubing
51 SG252-82 Soft Polyurethane Foam
52 SG259-82 Polyethylene Blow Molded Drums
53 SG260-82 Sintered Polyvinyl Chloride Microcellular Separators for Batteries
54 SG274-82 Centrifugal Plastic Ventilators
55 SG275-82 Centrifugal Plastic Pumps
56 SG281-83 Polypropylene Strapping Rope
57 SG311-83 Soft Polyvinyl Chloride Printed Film
58 SG81-84 Soft Polyvinyl Chloride Blown Film
59 SG354-84 Polypropylene Blown Film
60 SG369-84 Polyethylene (LDPE) Blown Agricultural Ground Re-cover Film
61 SG384-82 Centrifugal Plastic Ventilator
62 SG275-82 Centrifugal Plastic Pump
63 p>61 SG384-84 Polyvinyl chloride sandwich foam assembled sandals
62 SG387-84 Acrylonitrile-butadiene-styrene (ABS) plastic extruded sheet
63 GB6674-86 Low-density polyethylene pipes for sprinkler irrigation
64 GB6980-86 Calcium-plastic corrugated boxes
65 GB7134 GB7134-86 Cast industrial plexiglass sheets, rods and tubes
66 GB7135-86 Cast pearlescent plexiglass sheets
67 GB8673-88 Technical requirements for plastic crates for storage and transportation packaging of fresh eggs
68 GB8674-88 Transportation, storage, and management of plastic packaging parts for storage and transportation packaging of fresh eggs
69 GB8814-88 Doors, window frames with rigid polyvinyl chloride (PVC) profiles
70 GB8815-88 Wire and cable with soft polyvinyl chloride plastic
71 GB8868-88 Vegetable plastic crates
72 GB8945-88 Polyvinyl Chloride wallpaper
73 GB8946-88 Plastic woven bags
74 GB8946-88 Plastic bags
75 GB8946-88 Plastic bags
74 GB8947-88 Composite Plastic Woven Bags
75 GB8948-88 Polyvinyl Chloride Artificial Leather
76 GB8949-88 Polyurethane Artificial Leather
77 GB9681-88 Hygienic Standard for Polyvinyl Chloride Molded Products for Food Packaging
78 GB9683-88 Composite Food Hygienic Standard for Packaging Bags
79 GB9685-88 Hygienic Standard for the Use of Auxiliaries for Food Containers and Packaging Materials
80 GB9686-88 Hygienic Standard for Polyamide Epoxy Resin Coating for the Interior of Food Containers (Replaces GBn45-84)
81 GB9687-88 Hygienic Standard for Polyethylene Molding Products for Food Packaging (Replaces GBn84-80)
82 GB9688-88 food packaging with polypropylene molding health standards (instead of GBn85-80)
83 GB9689-88 food packaging with polystyrene molding health standards (instead of GBn86-80)
84 GB9690-88 food packaging with melamine molding products Hygienic standard (instead of GBn87-80)
85 GB9691-88 food packaging with polyethylene resin health standards (instead of GBn88-80)
86 GB9692-88 food packaging with polystyrene resin health standards (instead of GBn89-80)
87 GB9693-88 food packaging with Hygienic standard for polypropylene resin for food packaging (replacing GBn146-81)
88 GB10002 1-88 Rigid PVC pipes for water supply
89 GB10002 2-88 Rigid PVC fittings for water supply
90 GB10003-88 General-purpose biaxially oriented polypropylene film
91 GB10004-88 Polyester (PET) aluminum foil
91 88 Polyester (PET) aluminum foil (Al) polypropylene (CPP) composite films and bags
92 GB1005-88 Biaxially oriented polypropylene composite low-density polyethylene (BOPP/LDPE) films and bags
93 GB10008-88 Polyethylene foam ceiling
94 GB10009-88 Acrylonitrile- Butadiene Styrene (ABS) plastic extrusion sheet
95 GB10010-88 Flexible polyvinyl chloride tubing for medical use
96 GB10441-89 Flexible plastic folding packaging containers
97 GB10454-89 Flexible container bags
98 GB10457-89 Polyethylene self-adhesive cling film
99 GB10506-89 Injection molded shoes
100 GB10798-89 General wall thickness table for thermoplastic pipes
101 GB10800-89 Rigid polyurethane foam for building insulation
102 GB10801-89 Polystyrene foam for thermal insulation
103 GB10802-89 Flexible Polyurethane Foam
104 GB10803-89 Composite Plastic Woven Fabric
105 GB10804-89 Rigid Polyvinyl Chloride (PVC) Inner Door
106 GB10805-89 Rigid PVC Film for Food Packaging
107 GB10806- 89 Plastic Mesh Bag
107 89 Plastic mesh bags
108 GB11793 1-89 PVC plastic window building physical properties classification
109 GB11793 2-89 PVC plastic window mechanical properties, weathering technical conditions
110 GB11982 1-89 polyvinyl chloride coil flooring
111 GB12003-89 Basic dimensional tolerances for plastic windows
112 GB12023-89 Plastic strapping
113 GB12025-89 Blown film of high-density polyethylene
114 GB12026-89 Heat-sealable biaxially oriented polypropylene film
115 GB12802-91 Biaxially oriented polypropylene film for capacitors <
116 GB13527 1/T-92 Flexible PVC pipes for fluid transportation
117 GB13527 2/T-92 Flexible PVC sleeves for wire insulation
118 GB13508-92 Polyethylene blow-molded drums
119 GB13018-91 Polypropylene (PP) tubing --GB13018-91 Polypropylene (PP) pipes - Limit deviations of outer diameter and wall thickness
120 GB13019-91 Polyethylene (PE) pipes - Limit deviations of outer diameter and wall thickness
121 GB13020-91 Rigid PVC-U pipes
112 (PVC-U) pipes - Limit deviations of outer diameter and wall thickness
122 QB1128-91 Unidirectional stretching high-density polyethylene film
123 ZGB33001-85 Polytetrafluoroethylene (PTFE) pipes
124 ZGB33002- 85 Polytetrafluoroethylene (PTFE) plates
< p>125 ZGB33003-85 Polytetrafluoroethylene rods126 ZGB33004-85 Polytetrafluoroethylene film
127 ZGY28006-88 Rigid Polyvinyl Chloride (PVC-U) skirting board
128 ZBY28007-88 Low foaming polyvinyl chloride (PVC) hanging mirrors line
129 ZBY28009-89 Buttons of unsaturated polyester resin
130 ZBG33005-89 Raw PTFE tape for thread sealing
131 ZBG33006-89 Polypropylene extruded sheet
132 ZBG33007-89 Polyethylene extruded sheet
133 ZBG33008-89 Polyvinyl Chloride Plastic Corrugated Wire Tubing
134 ZBG33009-89 Polyvinyl Chloride Heat Shrinkable Film, Sleeving
135 QB1127-91 Flexible Polyvinyl Chloride Printed Film
136 QB1125-91 Unstretched Polyethylene, Unstretched Polypropylene Film
137 QB1126-91 Polyolefin Filler Masterbatch
138 QB1124-91 Polyvinyl Chloride Plastic Shoe Sole
139 QB1123-91 Paper-Plastic Non-Woven Composite Packaging Bags
140 QB1230-91 Polyvinyl Chloride Nylon-Cloth-Based Artificial Leather
141 QB1231-91 Blow-Molded Polyethylene Films for Liquid Packaging
141 QB1231-91 Polyethylene Blown film
142 GB13520/T-92 Rigid polyvinyl chloride extrusion sheet