Commitment letter of safety responsibility 1 For the sake of personal safety and health and the stable development of the enterprise, I voluntarily sign and abide by the following commitments in my work:
Safety responsibility
(1) Seriously study and abide by the rules and regulations of this position, observe the operating procedures, and be directly responsible for the safety and environmental protection of this position;
(2) The warehouse keeper must stick to his post in accordance with the regulations, observe labor discipline, and shall not find someone to take over at will, register the receipt and delivery of materials in accordance with the regulations, and timely communicate with the financial supervisor about account book information;
(3) Flammable and explosive paints, oils and contaminated materials should be properly stored to prevent accidents. Familiar with all kinds of safety and environmental protection appliances, properly keep all kinds of safety appliances, and record the separately collected safety protection appliances according to regulations;
(4) Responsible for the safety of incoming materials; All purchased materials should be classified and kept, so as to ensure the safety and preservation of the purchased materials, without loss, waste or backlog; Prevent materials from being affected with damp, deformed, broken and lost due to improper storage, resulting in inconsistent accounts and materials;
(5) Have the right to supervise the eligibility of incoming materials and make suggestions, and take full responsibility for the shortage of incoming and outgoing materials;
(6) Be responsible for the safety and environmental protection management of the general warehouse, prevent the leakage of contaminated materials, actively prevent fires, put an end to smoking and the use of open flames in the warehouse, actively prepare fire-fighting appliances, and properly keep and use all kinds of fire-fighting appliances and equipment;
(7) Have the right to refuse illegally stored instructions, and have the right to refuse to distribute materials if others fail to receive materials according to regulations, and do a good job of explanation;
(8) Study hard relevant professional knowledge and improve the warehouse safety and environmental protection system and hardware facilities. Continuously identify warehouse risks and environmental factors and take effective preventive and control measures.
20xx year safety production target
The mortality rate per thousand people is 0;
The serious injury rate of thousands of people is 0;
The rate of minor injuries per thousand people is 0;
The incidence of occupational diseases is 0;
Major equipment accident is 0;
Major fires and other accidents are 0.
I consciously abide by the above commitments, and I am willing to take responsibility if I violate them. This letter of commitment shall come into effect as of the date of signing.
Organizer (signature):
Type of work: team leader (signature):
date month year
Commitment letter of safety responsibility 2 1. Drivers of the company must abide by the Road Traffic Law of People's Republic of China (PRC) and relevant traffic management rules and regulations, and abide by the company's rules and regulations to drive safely.
2. Drivers should take good care of the company's vehicles, pay attention to vehicle maintenance at ordinary times, and often check the main parts of vehicles to ensure the normal running of vehicles. Check whether the water, electricity, oil and other performances of the vehicle are normal before driving. If there is any abnormality, it should be supplemented or adjusted immediately. When you come back from the car, you should check the oil reservoir. If you find that the oil storage is less than one grid, you should refuel immediately, and you can't refuel temporarily when you leave the car.
3. When the driver finds that the vehicle he is driving is faulty, he should repair it immediately. Will not repair, should immediately report to the person in charge, and put forward specific maintenance advice (including maintenance projects and roughly needed funds, etc.). ). Without approval, the vehicle shall not be sent to the factory for maintenance without permission, and the offender's expenses shall not be reimbursed.
4. When driving or parking a vehicle, you must pay attention to choosing the parking place and location, and you can't park on the road sections or dangerous areas where parking is not allowed. When the driver leaves the vehicle, lock the safety lock to prevent the vehicle from being stolen. After picking up the car, the car will be parked in the garage and the keys and driving license will be given to the office. Unauthorized use of cars is prohibited.
5. The driver should always check the validity of various certificates of the vehicle he is driving to ensure that the certificates are complete before driving. Fatigue driving and drunk driving are not allowed.
6. The driver shall bear all the consequences of violation of regulations or traffic accidents caused by drunk driving or unauthorized use of cars, and shall be given administrative punishment.
7. Drivers must obey the traffic rules, drive in a civilized way, and don't drive dangerously (including high speed, rear-end collision, lane contention, racing, etc. ). If the driver thinks that the instructions of others, including company leaders, cannot be carried out, he can raise an objection and ask for a change of instructions. If a traffic accident occurs on the way and can be dealt with quickly, it should be dealt with quickly; If it is necessary to deal with it on the spot, you should call the police immediately and stay where you are, and you should not flee the scene. If an accident occurs due to violation of traffic regulations, the driver should bear all consequences and responsibilities.
8. If the driver is fined for violation of regulations or incomplete documents, he will not be reimbursed. If an accident is caused by violation of regulations, the relevant driver shall bear the responsibility and consequences.
9. If a traffic accident is caused by the driver's duty behavior, the insurance company shall be liable for compensation. If the amount of compensation exceeds the actual amount of compensation, the driver shall bear the excess.
10. If traffic accidents happen more than three times in one year or the company loses more than 100,000 yuan due to traffic accidents, the driver must leave the company automatically, otherwise the company has the right to terminate its labor contract relationship.
XXX
XXXX，XXXX，XX，XX
3 Wenjiang District Urban Management Law Enforcement Brigade Safety Responsibility Commitment Letter:
Our store is located at No.39-47 Wanchun Road, 20xx165438+1October 8 for renovation, and we apply for setting up a store. We are solely responsible for all safety accidents and five bags in front of the door during the renovation and in the future. If the shop signboard is damaged during use, we will maintain or update it in time. If they conflict with government actions, we will dismantle them unconditionally.
Hereby promise
39-47 Wanchun Road, Wenjiang District, Duo 'ai
20xx- 1 1-8
Safety Responsibility Commitment 4 xxx School:
In order to implement the interim provisions of the provincial government on the main responsibility of safety production, as a teacher in our school, I also have certain responsibilities for safety teaching in our school. In order to seriously study the Regulations on Work Safety in Hebei Province, the Law on Work Safety and other laws, regulations, rules, standards and related provisions, and carry out the "Work Safety Commitment" activities in depth, we solemnly promise as follows:
First, actively implement the main responsibility of the unit's safety work, strictly implement various safety responsibility rules and regulations, consciously accept the supervision and management of the school, and effectively put the safety responsibility work in place.
Second, actively participate in the education and training activities of safety knowledge and fire protection knowledge, improve safety awareness and safety business skills, and be able to deal with all kinds of emergencies decisively and correctly.
Third, teachers are practitioners of student safety work, ensuring that no student injury accidents occur within the scope of their duties and behaviors, and knowing what they should do, what they should not do and how to do it.
Four, education students must conscientiously implement the rules and regulations of the school, listen to the teacher's arrangement and guidance, strictly regulate their own behavior, seriously study and master the necessary safety knowledge and skills.
Five, in the class, after work, if found hidden dangers in a timely manner to eliminate or report to the relevant personnel.
Six, to carry out safety education for class students, to ensure the smooth development of the "safe production commitment" activities.
If you violate the above commitments, you are willing to accept the corresponding administrative punishment and bear the corresponding legal responsibilities.
Signature of legal representative:
Teacher's signature:
20xx March 6th
In order to strengthen the management of production safety on the construction site and strengthen safety awareness, the safety responsibility letter of this project is specially signed according to the relevant national safety laws, regulations, standards and procedures. The construction unit is required to consciously abide by and perform all relevant clauses in the letter of responsibility, and the construction unit shall take full responsibility for safety accidents caused by violating the terms of the letter of responsibility. The details are as follows:
I. Safety management
1. Before entering the site, the construction unit should carefully prepare the construction safety measures in the construction organization design submitted to the construction unit and supervision unit, and the measures should be targeted and operable.
2. In order to establish and improve the responsibility system for production safety, a leading group for production safety and fire prevention on the construction site must be established. The team leader shall be the project manager, and the members shall be the construction team leader, safety officer, construction team leader and subcontract project manager.
3. Strengthen safety education for all construction personnel. Regularly organize construction personnel to learn safety production management regulations, improve their ideological understanding, and always establish safety production awareness. Do a good job in pre-job training for workers and induction training for new workers. Let every worker know the safety technology and operating specifications of his post.
4, the project manager is the person directly responsible for the construction site, directly responsible for the safety production of the construction site.
5. Establish a safety production reporting system. The construction team shall establish a safety production reporting system, and specifically implement the project safety production report, sub-project safety production report, power safety production report, fire safety production report, safety production monthly report, etc.
6, the construction site must make safety warning signs and safety warning signs; Ensure smooth roads on site; Large parts are neatly stacked. The construction site must be equipped with sufficient safety fire fighting equipment according to regulations.
Second, the safety protection
1, to achieve "four exits" protection: the stairs, elevator exits, reserved exits and access openings of the project under construction must be protected by temporary guardrails or cover plates.
2. "Five-edge" protection: double railings and safety nets with the height of 1 m must be set on the balcony side, floor side, floor side, runway side and the outside of the unloading platform.
3. Safe passage: Construction personnel and other personnel should set up special safe passages at the entrances and exits of construction or commuting.
4. Work at heights: For related work at heights, reliable internal and external scaffolding and protective nets must be designed and erected with reference to Technical Specification for Safety of Work at Heights in Building Construction, and feasible safety production protection measures should be formulated to ensure the safety of work.
5. Prevention of mechanical injury: Construction machinery should be operated in strict accordance with the construction specifications, equipped with safety devices, strengthened mechanical maintenance and maintenance to ensure the normal operation of machinery, and regular safety inspection of key transportation machinery. Relevant personnel must hold valid certificates and keep operation records.
6, enter the site must wear a helmet.
Third, use electricity safely.
On-site construction electricity should be arranged and arranged according to the requirements of Technical Specification for Safety of Temporary Electricity Use in Construction Sites.
1. Power distribution room: The power distribution room must be designed and installed in accordance with the temporary electricity consumption regulations, and at the same time, trained professional electricians are responsible for it, and the responsibility system is implemented to ensure daily maintenance and use.
2. On-site power facilities: the distribution box should meet the requirements of "three-level distribution and two-level protection", and the wire laying should be installed according to the requirements of "three-phase five-wire system".
3. Power consumption for machinery: The power consumption for machinery shall conform to the provisions of "one machine, one brake, one leakage and one box", and shall be handled by a special person.
4. Lighting for on-site construction: there should be sufficient lighting for night operation, safe low-voltage lighting should be used for construction in special environments such as damp, and special lighting lines should be protected against leakage.
Fourth, fire prevention.
1. Strictly control hot work: In order to prevent fire caused by open flame work, the hot work report should be performed and the open flame work should be strictly controlled.
2. Woodworking room fire prevention: Woodworking room is a key fire prevention area, so it is necessary to clean up sundries in time, prohibit fireworks, make eye-catching warnings and equip with fire-fighting equipment.
3. Fire prevention of material warehouse and reference room: establish fire prevention system, assign responsibility to people, and equip with sufficient fire fighting equipment.
4. Fire prevention in dormitory and office: it is forbidden to use electricity and fire at will, and the person responsible for fire prevention is clearly defined.
5. Do not use electrical appliances for heating or cooking, and do not burn sundries at will.
6. The canteen must be far away from mountains and trees.
Five, vertical transportation machinery
1, tower crane installation must have torque limiter, limiter, hook and hoist must have safety devices, wire rope needs regular maintenance;
2, tower crane installation must be strictly accepted, and issued by the safety supervision department inspection rear can use.
3, tower crane command must be the specialist is responsible for, commanders and drivers must hold relevant certificates.
VI. Employment Management
The construction unit must master the situation of the workers used, and shall not take in or use personnel with unknown identity or irregular identity documents, or use or take in personnel with unclear history or illegal and criminal acts.
Seven, for all kinds of production safety accidents, should be reported in a timely manner according to the relevant provisions.
Report all kinds of safety accidents in time, assist in investigation and handling, and report the handling opinions of the enterprise project department to the infrastructure office, and strive to reduce the losses to a minimum. In case of major safety and fire accidents on the construction site, the performance bond of the construction unit shall be deducted, and the parties concerned shall be punished according to regulations.
People focus on punishment; In case of fire or local fire, the construction unit will be fined 5000-50000 yuan, the project manager will be fined 1000- 10000 yuan, the safety officer will be fined 500-5000 yuan, and the party concerned will be fined 10000 yuan, and will be dismissed immediately.
VIII. This Agreement shall come into force as of the date of signing, and 1 is in quadruplicate, which shall be signed and sealed by the project manager or legal representative of the construction unit and the project leader of the construction unit.
Among them, the construction unit and the construction unit each have 1 copy, 1 copy is kept by the supervision unit, and 1 copy is reported to the school security office for the record.
Safety Responsibility Commitment 6 Safety work is the top priority of coal mine work, and slack in safety is equal to contempt for life. Safety work should start from me, start from small things, and adhere to the policy of "safety first, prevention first, comprehensive management". In order to ensure safety and better adapt to our work, we will do the following in our daily work in the future:
1, we must strictly abide by the relevant national laws and regulations and coal mine safety regulations, and conscientiously implement the relevant management regulations of the water exploration team project department of the special survey center of China Coal Geology Bureau and Jinyang Nanyangpo Coal Industry.
2. Perform post safety responsibilities, be responsible for enterprise safety, be responsible for department safety and be responsible for your own safety.
3, resolutely implement the safety operation procedures, never neglect, never careless, and resolutely use labor protection articles and safety protection articles correctly.
4. Strictly abide by all kinds of safety management laws, regulations, systems and regulations in the operation, obey the management, truly "take the standard post and do the standard work" and do not violate the rules; Do three no harm; Be strict with yourself, pay more attention, be diligent in observation, be good at thinking, keep safe posts, earnestly fulfill safety responsibilities, and do not produce without safety.
5. Make sure that you obey the work arrangement, work with peace of mind and earnestly implement the leave system during the holiday. If there are no special circumstances on the way, I am willing to accept the punishment of the project department.
6. Be strict with yourself at work, ensure that you don't drink before and after work, don't care about time when you are busy, be on call, be unreasonable, and don't cross the line. I agree to extend my monthly salary by two months as stipulated by the project department. If the salary is extended under special circumstances, of course I will understand. If I violate the above commitments, I am willing to accept any punishment from the Project Department of the Water Search Team of the Special Survey Center of China Coal Geology Bureau.
7. Actively participate in the safety production training and learning activities carried out in the mine, improve their safety awareness step by step, and truly "work as a standard worker".
Commitment:
date month year
Safety Responsibility Commitment Chapter VII Coal production is full of difficulties and dangers. As a monitor, I bravely carry heavy burdens. To this end, I solemnly promise:
First, change the concept, safety first, safety before production, safety team is also my performance. It is my responsibility to ensure the safety of team members. It is the responsibility of team members and their families to manage safety and stop violations. The players are safe, my face is bright and my conscience is guilty.
Second, take the initiative to learn, learn with an open mind and keep learning. Fully grasp the safety team's production knowledge and response, and actively participate in various trainings organized by the mine and the team.
Third, I will never take the lead in violating discipline, I will never command discipline, and I will not pass on or shirk the punishment and responsibility of my discipline or command to the team members.
Four, each class should organize the briefing, don't cheat, don't go through the motions, ensure that every employee attend the briefing on time, make full use of the briefing to make early warning and arrangement for safety production on duty, and make records of the briefing.
Five, repeatedly stressed patrol back and forth, to ensure that there are no typical violations and a class of violations on duty, to ensure that there are no three violations around. Ensure that all employees on duty are dressed neatly and have self-rescuers with them.
Six, actively investigate hidden dangers, there is danger, I found a place, deal with a place, do not deal with hidden dangers, unsafe do not work, deal with hidden dangers without delay.
Seven, conscientiously do a good job of knocking and helping in this class, ensure that you can knock and help in a comprehensive way within the scope of work in accordance with the prescribed procedures and time, ensure that all employees on duty bring tools in accordance with the regulations, and carry out detailed knocking and helping in accordance with the procedures to ensure that there is no roof accident on duty.
Eight, each class with qualified portable gas alarming device into the well, to ensure that the gas alarming device is in a normally open state, to ensure that the gas alarming device has enough electricity, to ensure that the gas overrun does not run.
Nine, strict engineering quality acceptance, unqualified adhere to rework, do not rework resolutely deduct points, make acceptance records, and pay wages in strict accordance with the records of each class.
10. Obey the command and scheduling of superior management personnel, resolutely rectify, resolutely complete the on-site arrangement of inspectors, strictly implement the work arrangement of superior management personnel, and actively feedback the work progress.
Eleven, have objections to the punishment, complaints in strict accordance with due process, not unreasonable, do not encourage team members to collectively stop work, take the lead in doing a good job of explanation, publicity and guidance. No intercession, cover-up or perjury for three violations.
Twelve, cooperate with the team members from top to bottom, and accept the last working procedure before coming off work, and do not leave early.
Thirteen, each class carries the Quality Standardization Management Standard to guide the safe production on duty, and arranges, supervises and accepts the work on duty in strict accordance with the procedures and standards specified in the form.
14. I consciously abide by the above commitments, and I am willing to bear the responsibility and punishment if I violate them.
Person in charge: Commitment (Team Leader):
date month year