Installation method of range hood
1. Determine the installation position of the hanging plate.
The installation position of the range hood is right above the cooker and coaxial with the cooker. The height between the bottom of the top suction range hood and the surface of the cooker is 65-75cm, and the height between the bottom of the side suction range hood and the surface of the cooker is 35-45cm. According to the size of the specific range hood product, find the installation position of the back pinch plate and draw a line with a pencil. In addition, if the installation position of the range hood product is still some distance from the top, in order to hide the smoke pipe, the extension hood of the range hood can be customized, and the position of the extension hood hanging plate should be determined before installation.
2, drilling installation hanging plate
After determining the installation position of the hanging plate, drill a hole with a depth of 5-6cm at the installation position with an impact drill, press the expansion pipe into the hole, and then fix the hanging plate reliably with screws.
3. Hang the range hood on the hanging board.
The style behind the range hood can be embedded in the hanging plate, thus hanging the range hood. Because the range hood is generally heavy, it usually needs two people to cooperate when hanging it.
4. Install the smoke exhaust pipe
Insert one end of the smoke exhaust pipe into the notch between the inner and outer rings of the check valve outlet and fasten it with screws. The other end directly extends into the outdoor through the reserved hole. If the smoke exhaust pipe is connected to the public flue, it must be connected with the smoke backflow check valve of the public flue and sealed. If the flue gas is discharged outside the wall, it is suggested to install a blind plate outside the flue gas pipe to avoid reinjection.
5. Install the extension cover
Only for products that need to install the extension cover, if necessary, install the hanging plate, and fasten the extension cover after the installation of the range hood and exhaust pipe.
6. Install oil cups and other accessories
Only oil cups, masks and other accessories for installing range hoods are left. After the accessories are installed, the range hood is basically installed.
Matters needing attention in installation of range hood
1, drilling precautions
Before installing the kitchen range hood, be sure that there are no water pipes, gas pipes and wires passing through the punching parts to avoid damage or even electric shock.
2, pay attention to keep the level.
Pay attention to the levelness of kitchen range hood during installation, and observe its levelness after installation to avoid tilting. Ensure that the kitchen range hood will not shake or unhook.
3. Precautions for installing smoke exhaust pipe
If the flue gas is discharged to the flue, do not insert the smoke exhaust pipe too deep to increase the smoke exhaust resistance. If it leads to the outside, make sure that the smoke exhaust nozzle protrudes 3 cm. The exhaust pipe should not be too long, preferably not more than 2 meters, so as to minimize bending and avoid multiple 90-degree bending, otherwise it will affect the oil smoke absorption effect.
4. Debugging after installation
After the installation of kitchen range hood is completed, be sure to remember to debug the kitchen range hood. Generally, it is through the switch of the function key to see whether it works normally.
5, do a good job of protection
After the kitchen range hood is installed, it is necessary to protect the kitchen range hood if there are other renovation projects in the kitchen that have not been completed. You can stick a plastic protective film on the kitchen lampblack machine.
When we choose a range hood, it is also very important to know how to install it correctly. The above is the installation method and matters needing attention of the range hood introduced by Bian Xiao today, which ends here.