leveling the wall → painting the primer → stirring → feeding → scraping → receiving → painting → mending the flower. 1. stirring: before scraping the product, open the lid of the product, and fully stir the paint with a stirring rod. If there are bubbles, please let the product stand for about ten minutes until the bubbles disappear.

2. Feeding: Put proper paint on the inner frame of the printing tool.

3. Scraping: Place the printing tool in the corner, with the die surface of the printing die close to the wall, and then scrape it with a scraper.

4. Receiving: After scraping each pattern, collect all the excess on the mold. Please lift the mold vertically to the wall.

5. pattern matching: when pattern matching, make the horizontal, vertical and oblique lines according to the row spacing and row spacing of the pattern.

the outer frame of the mold is close to the outermost edge of the printed pattern, and the reference point can be found through the outer frame of the mold after finding the reference point and scraping it, and so on to the whole wall.

6. flower patching: when the wall surface is not covered with a hard mold in the vertical or horizontal direction, please use a soft mold to make it up.

liquid wallpaper is a combination of the advantages of adhesive paint and wallpaper, and it is a derivative of both.

is a new environmentally friendly and durable wall decoration material.

National Owners' Decoration Exchange Group 573132185