Marble is a commonly used decorative material. One of its disadvantages is that it is too smooth, so it is easy to slip. So what can be done to prevent marble from slipping? What is the construction process of marble anti-skid? After reading our introduction below, I believe everyone should know how to do it. Let's take a look at Bian Xiao.

First, how to deal with marble anti-slip?

1, the most once and for all use of mechanical therapy is mechanical therapy. Through certain technical means, uneven textures such as burnt surface, planed surface, litchi surface, antique surface and chopped axe surface are formed on the stone surface, and the anti-skid effect is achieved. However, it needs professional technicians to operate, and the stone floor after mechanical treatment loses its original bright effect, which is also difficult to clean and maintain. Generally speaking, it is more suitable for public places or areas with large traffic such as stairs and walkways.

2, the use of stone anti-slip stickers The common stone anti-slip stickers on the market are mostly selected anti-slip sand, rubber and plastic anti-slip fibers or sand-free special anti-slip materials, which have good corrosion resistance to most chemical components, water resistance, temperature resistance and strong ultraviolet resistance. The surface of the anti-slip sticker can also be printed with various exquisite color patterns, trademarks and words, which is both practical and beautiful.

3. Anti-skid agent widens the original capillary channel on the surface of ceramic tile and stone through osmotic reaction, and forms a large number of extremely tiny pits on its surface. When drying, the static friction coefficient is higher than before due to the increase of surface roughness. When there is water, these capillary tubes and tiny pits will be filled. When the foot steps on it, the water is squeezed out, and many tiny suction cups can be formed between the foot and the ground to prevent slipping, and the static friction coefficient and anti-skid performance are greatly improved. It should be noted that it needs to be cleaned regularly after using the anti-slip agent to keep the tiny pits on the surface from being covered by oil.

Second, the marble anti-skid construction technology

1. Clean the floor with clean water or alkaline cleaning solution, then rinse with clean water and scrape or dry it.

2. Clean the ground again with anti-slip liquid, and keep it for a certain period of time, then rinse it with clear water or scrape or dry it directly.

3. When applying anti-slip liquid, be sure to master the moisturizing time according to different materials (you can take test samples for moisturizing time).

4. Wash the floor with clean water or alkaline cleaning solution, and then scrape or dry it.

As for how to carry out anti-skid treatment of marble and the specific construction process, we have made a detailed introduction for everyone through the above. The anti-skid work of marble must be done, especially for the elderly and children at home. I believe that as long as the above steps are followed, the relevant anti-skid work can be done well.