making vertical poster
the method of making vertical poster is to create a new vertical poster with a general size of 51X71cm, and then drag the materials you used above into this new document. Just remake it. How to change a horizontal poster into a vertical one by ps
1. How to change a horizontally typeset picture into a vertical one by PS
How to change a horizontal picture into a vertical picture by PS:
1. First, open the picture to be processed by PS software;
2. Now rotate the canvas first. You can click the image menu-Rotate Canvas, and then rotate the picture appropriately.
3. After the picture is straightened, the first method can be crop by clicking the crop tool in the toolbox.
4. After cutting, you can adjust the size of the picture to the required size according to your own needs. You can click Image menu-Image Size and enter the width and height of the picture yourself to adjust it, so that the picture is processed.
5. In the second method, you can click the File menu, create a new canvas, and then enter the size of the image yourself.
6. Then select the mobile tool in the toolbox and drag the picture to the newly created canvas;
7. Press "CTRL+T" of the keyboard in the new canvas and then deform the picture to adjust the picture to the canvas, but this method has its shortcomings, and the picture may be a little deformed when filling;
8. You can press the "CTRL+T" command of the keyboard, and then press and hold the shift key of the keyboard to enlarge and reduce the picture to a suitable position in equal proportion;
9. Click the imitation stamp tool in the toolbox, then press the alt key of the keyboard near the white to select it, and then fill it carefully;
11, as long as you have enough patience and constantly fill and modify the pictures, you can get the beautiful pictures you need.
2.PS can change a horizontal picture into a vertical picture
Operation method
First, open the picture to be processed with PS software!
Now rotate the canvas first. You can click the image menu-Rotate Canvas, and then rotate the picture appropriately!
after the picture is corrected, how to treat the vertical picture as a horizontal picture? The first method can be used to cut the picture by clicking the cutting tool in the toolbox! The disadvantage of using this method is that some scenery in the picture will be cut out!
after cutting, you can adjust the size of the picture to the size we need according to your own needs! You can click the image menu-image size, and enter the width and height of the image yourself to adjust! So the picture is processed!
what if I don't want to crop the picture in the above way? You can take the second method to deal with it, you can click the file menu, create a new canvas, and then enter the size of the image yourself!
then select the move tool in the toolbox and drag the picture to the newly created canvas!
press "CTRL+T" on the keyboard in the new canvas, and then deform the picture to adjust it to the canvas! But this method has its shortcomings, and the picture may be a little deformed when filling!
what if I don't want to distort the picture? You can press the "CTRL+T" command on the keyboard, and then press and hold the shift key on the keyboard to enlarge and shrink the picture to a suitable position in equal proportion!
what about the blank space on the side at this time? Click the imitation stamp tool in the toolbox, then press the alt key of the keyboard near the white to select it, and then fill it carefully!
As long as you have enough patience and keep filling and modifying the pictures, you can get the beautiful pictures you need! Finally, you just need to output the processed pictures! How to make a poster?
how to make a poster? I want to learn simple PS
1. Open PS and create a new blank document. The background color is set to white, and the document size is defined according to the implementation needs.
2. Select a picture that can be used as a basemap and open it. Use the "Move Tool" to move the picture into the current document interface to create "Layer 1", and then press "Ctrl+T" to adjust its size and position.
3. Then click the Add Layer Mask button in the Layers panel to add a mask for the current layer. Then select the Gradient Fill Tool to fill it with a black and white gradient.
4. Then open a picture that can be used as a basemap, and apply a mask and gradient fill to it. And adjust its transparency to make it look slightly darker.
5. Insert another picture. Because the picture has a background, select the "Magic wand tool" to select and delete the background. Then set its Layer Blending Mode to Strong Light.
6. then select "text tool", enter the content related to the exploration theme, such as "SecretAdvertuers", set the shape of the text, and apply the style. the parameters are shown in the figure.
7. create a new layer and press "Ctrl+Alt+Shift+E" to create a stamped layer. Perform Filter → Artistic Effect → Poster Edge.
8. Then execute Filter → Sharpen →“USM Sharpen. The parameters and effects are shown in the figure.
9. Finally, add some textual descriptive information and apply relevant styles. The final effect is shown in the figure.
How do novices make posters? Basic detailed process of poster design
I said hand-painted first buy paper and sea newspaper 79cm* 119cm is available in black and white, which is the most basic.
Pigments generally make advertising colors cheaper, and markers are generally convenient for short-time posters.
When drawing, first determine the theme you want to draw, then make a sample, that is, draw a picture on paper, what to write, what to draw and what to draw, and then think about it. Then write the title in the newspaper according to the sample, and then write the specific content of your activity to be promoted.
Font. Use the word pop for the few and prominent words. There are also books on the Internet. If you want to draw posters for a long time, you can always buy some books in this field. < P > In fact, posters don't have to stick to one format to draw different contents. You can use different formats. < P > Like this, you can write the content of political study and life on the title "Exhibition Board for the exchange of old and new students". Find an open space to draw some lace or find a bigger plot to draw some flowers, trees and cartoon characters. You can see what your content is. What do you draw with it?
That's basically it. Let me show you a picture. It's the most basic. It's a little tight. It should be long.
(Remind you, you said to send it to your mailbox. What about it?)
How to design a poster after learning?
first look at other people's posters of the same type, and refer to a few more to learn from each other's strengths. Making your own.
how to use Word as a poster?
the file-new-will have an online dialog box on the right, and if you find it, you can do it.
But personally, if you make a poster, it is not much different from an ordinary wall newspaper, mainly depending on your typesetting and your proficiency in word. If you want to be good, it will be easy to do it.
How to make a huge poster
Well, the unit M is not indented in the software. 1411x211 inkjet printing 31-51dpi printing 311dpi
How to make a poster
Use PS as a poster
1. Open the material picture (open the picture with people as appropriate)
2. Image-adjustment-decoloration
3. Image-adjustment-inversion
Methods: Select all the images in the canvas (choose from the menu-all), edit-copy (or ctrl+c), click the channel panel-create a new channel, edit-paste (or CTRL+V)-cancel the selection.
6. Load the channel as a selection
7. Return to the Layers panel-create a new layer and then hide the background layer-click Layer 1 (that is, the newly created layer)-Alt+Delete fills the foreground color (when the foreground color is black)-cancel the selection.
8. Create a new layer 2—— transfer layer 2 below layer 1, and fill the background color with ctrl+Delete (if the background color is light yellow, you can choose the color as you like)
9. Select a brush to erase the background, and then type it for editing (the erasing effect is shown in the figure).
how to make a poster? it needs primary school!
Is it a poster?
How does word make a poster?
It can be designed and typeset beautifully in Word. I'm afraid you have no imagination, and the potential in word is quite great.
You can:
1. Insert a text box, horizontally or vertically as needed. The font, size and color can be set in the text box, which is different from the text outside the box. If you don't want that box, set the border to "wireless bar format" in the format of text box.
2. Insert wordart, which can be horizontally and vertically, and it is convenient to set the size, font and color of the word.
3. Insert a picture, which can be clip art in word Clip Gallery or your own pictures and photos stored in your computer. It can be used for illustration of articles, and can also be used as the shading of a part of a newspaper. (Insert-Picture-From File).
4. Use "Column" and "Drop Initial" in the Format toolbar to make special effects.
5. Use the functions in the "Draw" button to make some modifications.
after using these functions, your typesetting must look good.
how to set the size of PS poster
file-new-preset-default photoshop size-width is selected in front of cm, height is selected in front of cm, 121 is selected in front of cm, and resolution is 311 in front of cm
How to make poster pictures
It depends on what purpose you need, just use Mito for amateurs, and use PS professionally or find an advertising company.