Are you worried about invisible bacteria in your daily life? With the improvement of our living standard, there is a higher requirement for the quality of the surrounding living environment, whether it is a kitchen or a dead corner at home, a new type of high-temperature steam cleaner has become a good helper for housewives, and can use high-temperature and high-pressure steam to clean every corner of the home. Such a magical household appliance is deeply loved by consumers. Let's take a quick look at the high-temperature steam cleaning machine with Xiaobian.

what is a high temperature steam cleaner?

High-temperature steam cleaning machine is a kind of cleaning equipment that uses high-pressure and saturated steam and high-temperature effects to clean the dirt on the surface of parts, thus directly vaporizing the dirt. Not only is the cost low, but also it is efficient, water-saving and clean. Even small gaps and holes can be cleaned. The use of high-temperature steam cleaning machine can reduce the use of our cleaning agent, which is more environmentally friendly and safe.

how to use the high-temperature steam cleaning machine

When using the high-temperature steam cleaning machine, it is necessary to unscrew the safety helmet of the high-temperature steam cleaning machine counterclockwise from top to bottom, then add a measuring cup of water, and then tighten the safety helmet clockwise. You need to hear a clicking sound when tightening. Finally, install other accessories that need to be assembled. At this time, you can plug in the power supply, and at the same time, the power indicator light of the high-temperature steam cleaning machine will light up. Wait for about 5 minutes, press and hold the steam injection button, and point the injection port at the place where there is dirt, and you can use it.

Precautions for high-temperature steam cleaning machine

It is worth noting that the high-temperature steam cleaning machine only needs to be used with ordinary water, and no other items can be added. Moreover, the added water should be measured according to a certain amount, not too much or too little. In the process of use, be sure to blow all the steam inside, and then slowly unscrew the lid. After each cleaning, it is necessary to leave the high-temperature steam cleaner for a period of time, and then pour out the remaining water after cooling, so as to protect the heater.

Daily maintenance

In order to prolong the service life of the cleaning machine, daily maintenance is very important and must be strictly implemented:

Check the lubricating oil level in the crankcase of the high-pressure pump every day and change the lubricating oil once every three months;

clean the inlet filter once every two weeks;

clean the fuel nozzle and ignition electrode assembly once a month;

replace the fuel filter once in March;

disassemble and wash the high-pressure oil pump once in March.

troubleshooting

during the use of the cleaning machine, it is inevitable that faults will occur. When problems occur, the reasons should be carefully found according to different fault phenomena.

1)? The spray gun does not spray water

The water inlet and water inlet filter are blocked.

the nozzle is blocked.

the heating spiral pipe is blocked, and scale shall be removed if necessary.

2)? Unstable outlet pressure

insufficient water supply.

air is sucked into the pipeline due to reasons such as broken pipeline, cleaner nozzle not inserted into the cleaner, etc.

the nozzle is worn.

the seal of the high-pressure water pump leaks.

3)? Burner burning without ignition

insufficient air intake and white smoke.

the fuel filter, fuel pump and fuel nozzle are dirty and blocked.

the solenoid valve is damaged.

the ignition electrode position changes, and the spark is too weak.

the high voltage ignition coil is damaged.

the pressure switch is damaged.

if the steam cleaning machine has the above problems, users can find out the reasons and remove the faults themselves. However, if the washing machine has serious faults such as water leakage in the pump body and oil leakage in the crankcase, it should be sent to a professional maintenance department with complete accessories and strong technical force for repair, so as to avoid unnecessary economic losses.

Precautions

1. It is forbidden to add any chemicals such as detergents, and only ordinary water can be used.

2. Don't fill the water too full when using, because there is a pressure reducing valve on the cover, and if the water is too full, it will overflow from the hole of the pressure reducing valve.

3. add water and pour water after use: when you open the lid, be sure to finish the steam inside, and be sure to do it several times? , and then slowly open the lid.

4. when changing the head, don't drag it hard, you must spin it first and then drop it.

5. after cleaning, please leave the cleaner for a period of time, let its body cool, and then pour out the remaining water, which will help protect the heater.

daily maintenance of the high-temperature steam cleaning machine

if we want to make the high-temperature steam cleaning machine last longer and have a better cleaning effect, we should pay attention to the maintenance of the high-temperature steam cleaning machine on weekdays. If it is necessary to check the parts of the high-temperature steam cleaning machine every day, change the lubricating oil once every three months; You need to clean the inlet filter once every two weeks. In short, when we use the high-temperature steam cleaning machine, we need to check and clean the electrical appliances regularly, so as to clean more dirt for us better.

the above are some related introductions about the high-temperature steam cleaning machine. I hope I can help you.