Guangxi green building design specification is to save resources and protect the environment, ensure the multi-level health needs of residents and users, promote the sustainable development of Guangxi economy, and standardize and guide the green building design in Guangxi. Then, what are the provisions of Guangxi green building design code for measurement and intelligence? The following is the introduction of the provisions of Guangxi green building design code for measurement and intelligence brought by the construction network for reference.

electric energy consumption should be measured separately according to the use function and management requirements of the building:

1) residential electricity consumption should be measured by households.

2) The ownership of equipment use rights should be considered in the electricity consumption of public facilities in residential quarters, and the loads such as fans, pumps, elevators and public lighting should be measured by units and categories respectively, so as to provide a basis for energy-saving management and charging within the property.

3) The residential quarters should be equipped with automatic metering, copying and remote transmission systems for water meters, electricity meters and gas meters, and should be networked with the community management system.

4) Public buildings should use electricity for air conditioners according to their functions and management requirements; Lighting socket; Power consumption for pumps, elevators, fans, etc.; Information room, kitchen, boiler and other special electricity consumption are equipped with electricity itemized metering devices; The rental office and business premises shall be charged according to electricity consumption, cold and heat.

metering devices should be set centrally. When conditions are limited, centralized remote meter reading system or card-type meters should be adopted.

public buildings should be equipped with a building equipment monitoring and management system, including the following contents:

1) Monitoring outdoor temperature and humidity and indoor air quality.

2) centralized monitoring of lighting, air conditioning, water supply and drainage, elevators and other equipment.

3) It has the function of monitoring, counting, analyzing and managing the energy consumption of major equipment.

the design of intelligent building system should meet the relevant requirements in GB/T 51314, Design Standard of Intelligent Building, and GB51339, Code for Quality Acceptance of Intelligent Building Engineering.

for more information about ghostwriting of tenders and improving the winning rate, click on the customer service at the bottom for free consultation.