1. The range hood must be fixed directly on the wall. The normal installation method of the range hood is to fix the range hood horizontally on the concrete or brick wall with expansion bolts, not directly on the non-bearing wall, let alone on the cabinet. The range hood fixed on the cabinet must be removed and reinstalled.

2. In addition, when installing the expansion pipe, the cooperation between the pipe hole and the drilling hole must be close. It is forbidden to drill too large and the expansion pipe is loose, causing the machine to fall; When the range hood needs to be installed separately, the baffle in the attached accessories must be installed in place to prevent the machine from falling off.

Extended data:

Installation skills of range hood;

1. Determine the installation position and install it directly above the cooker. Top suction type requires a high range of 65-75 cm; Side-suction furnace 30-45cm. It should be installed directly on the load-bearing wall, not on the wooden wall to avoid fire.

2. Measure the position of the mounting hole of the mounting plate with a tape measure, mark it with a pen, drill the mounting hole with an impact drill and a drill with a suitable size, and install the mounting plate. Install the smoking machine on the mounting plate and test the firmness.

3, when installing the flue, pay attention to the flue and hood connection to seal firmly. If the air is discharged to the public flue, a check valve must be installed at the public flue and sealed.

References:

People's Network-range hoods, televisions, etc. All installed in place, eliminating hidden dangers.